RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ■ ■ ELECTRONIC COMPONENTS ■ ■ Änderungen vorbehalten / subject to change without notice TP-75 75W Triple Output with PFC Function series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage Low profile: 33mm thickness LED indicator for power on Cooling by free air convection Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty SPECIFICATION MODEL OUTPUT TP-75A CH2 CH3 CH1 CH2 CH3 CH1 CH2 DC VOLTAGE 5V 12V -5V 5V 12V -12V 5V 15V -15V RATED CURRENT 7A 3A 0.6A 7A 3A 0.4A 6A 2.5A 0.5A CURRENT RANGE 1.5 ~ 10A 0.2 ~ 4A 0 ~ 0.6A 1.5 ~ 10A 0.2 ~ 4A 0 ~ 0.6A 1.5 ~ 10A 0.2 ~ 3A 0 ~ 0.6A RATED POWER 74W 120mVp-p 120mVp-p 100mVp-p 120mVp-p 120mVp-p 100mVp-p VOLTAGE TOLERANCE Note.3 3.0% 4.0% 8.0% 3.0% 4.0% 8.0% 3.0% 4.0% 8.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 3.0% 4.0% 8.0% 3.0% 4.0% 8.0% 3.0% 4.0% 8.0% 800ms, 60ms at full load 36ms at full load Note.5 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF>0.95/230VAC EFFICIENCY (Typ.) 70% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 1.5A/115VAC 0.8A/115VAC COLD START 20A/230VAC LEAKAGE CURRENT <2mA / 240VAC PROTECTION OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & ISOLATION RESISTANCE NOTE 100mVp-p 75W CH1: 4.75 ~ 5.5V OVER LOAD OTHERS 120mVp-p CH3 LINE REGULATION VOLTAGE RANGE (Note 4) 75.8W RIPPLE & NOISE (max.) Note.2 100mVp-p VOLTAGE ADJ. RANGE HOLD TIME (Typ.) EMC TP-75C CH1 SETUP, RISE TIME INPUT TP-75B OUTPUT NUMBER EMI CONDUCTION & RADIATION HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING PF>0.98/115VAC at full load 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V on +5V Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 0.03%/ , 10 ~ 95% RH (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1min. I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 198.4K hrs min. MIL-HDBK-217F (25 179*99*33mm (L*W*H) 0.65Kg; 20pcs/12.7Kg/0.64CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:TP-75-SPEC 2006-04-13 TP-75 75W Triple Output with PFC Function series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage Low profile: 33mm thickness LED indicator for power on Cooling by free air convection Fixed switching frequency at PFC:67KHz PWM:134KHz 3 years warranty SPECIFICATION MODEL TP-75D TP-7503 OUTPUT NUMBER CH1 CH2 CH3 CH1 CH2 CH3 DC VOLTAGE 5V 24V 12V 5V 3.3V 12V RATED CURRENT 7A 1.5A 0.4A 9A 8A 0.3A CURRENT RANGE 1.5 ~ 10A 0.2 ~ 2.5A 0 ~ 0.6A 1.5 ~ 10A 0.2 ~ 8A 0 ~ 0.6A RATED POWER 75.8W 50mVp-p 120mVp-p 75W RIPPLE & NOISE (max.) Note.2 100mVp-p OUTPUT 120mVp-p 100mVp-p VOLTAGE TOLERANCE Note.3 3.0% 4.0% 8.0% 3.0% 4.0% 8.0% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% LOAD REGULATION 3.0% 4.0% 8.0% 3.0% 4.0% 8.0% 800ms, 60ms at full load SETUP, RISE TIME 36ms at full load HOLD TIME (Typ.) Note.5 90 ~ 264VAC VOLTAGE RANGE INPUT 120mVp-p CH1: 4.75 ~ 5.5V VOLTAGE ADJ. RANGE 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR PF>0.95/230VAC EFFICIENCY (Typ.) 70% AC CURRENT INRUSH CURRENT (max.) 1.5A/115VAC 0.8A/115VAC COLD START 20A/230VAC LEAKAGE CURRENT <2mA / 240VAC OVER LOAD 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION PF>0.98/115VAC at full load 5.75 ~ 6.75V on +5V Protection type : Shut down o/p voltage, re-power on to recover -10 ~ +60 (Refer to output load derating curve) OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC 1min. SAFETY & ISOLATION RESISTANCE EMC (Note 4) I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B HARMONIC CURRENT Compliance to EN61000-3-2,-3 EMS IMMUNITY MTBF OTHERS Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A 198.4K hrs min. MIL-HDBK-217F (25 179*99*33mm (L*W*H) 0.65Kg; 20pcs/12.7Kg/0.64CUFT DIMENSION PACKING NOTE ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 5. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:TP-75-SPEC 2006-04-13 RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ELECTRONIC COMPONENTS ■ Änderungen vorbehalten / subject to change without notice ■ ■ ■ TP-75 75W Triple Output with PFC Function Mechanical Specification Case No. 920A 60 series Unit:mm 65 LED +ADJ. 6.15 1 2 99 3 7.62 4 5 49.5 6 7 8 2-M4 L=4mm 33 18 32.5 17 8 4-M4 L=6mm 25 117 179 Terminal pin number assignment : Pin No. 1 2,3 4 5 Assignment DC OUTPUT +V2 COM DC OUTPUT +V1 DC OUTPUT +V3 Pin No. 6 7 8 Assignment FG AC/N AC/L Derating Curve Output Derating VS Input Voltage Ta=25 With 18CFM Forced AIR 100 100 90 (15cm) 80 80 70 Convection LOAD (%) LOAD (%) 60 40 20 -10 0 10 20 30 40 AMBIENT TEMPERATURE ( 50 60 60 50 40 70 (HORIZONTAL) 85 100 115 125 155 230 264 INPUT VOLTAGE (VAC) 60Hz ) File Name:TP-75-SPEC 2006-04-13 RSG RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de ■ ■ ELECTRONIC COMPONENTS ■ Änderungen vorbehalten / subject to change without notice ■ ■ ■