RSG TP-100A

RSG
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de
■
■
■
■
ELECTRONIC COMPONENTS
■
■
Änderungen vorbehalten / subject to change without notice
TP-100
100W Triple Output with PFC Function
series
Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.94
Protections:Short circuit/Over load/Over voltage
Free air cooling convection
Fixed switching frequency at 100KHz
3 years warranty
..
SPECIFICATION
MODEL
OUTPUT
TP-100A
TP-100C
TP-100D
CH1
CH2
CH3
CH1
CH2
CH3
CH1
CH2
CH3
CH1
CH2
CH3
DC VOLTAGE
5V
12V
-5V
5V
12V
-12V
5V
15V
-15V
5V
24V
12V
RATED CURRENT
10A
4A
0.6A
10A
4A
0.6A
10A
3A
0.6A
10A
2A
0.6A
CURRENT RANGE
3 ~ 15A
0.4 ~ 5A
0 ~ 1A
3 ~ 15A
0.4 ~ 5A
0 ~ 1A
3 ~ 15A
0.4 ~ 4A
0 ~ 1A
3 ~ 15A
0.4 ~ 3A
0 ~ 1A
RATED POWER (max.)
101W
105.2W
104W
105.2W
RIPPLE & NOISE (max.) Note.2 100mVp-p 120mVp-p 100mVp-p 100mVp-p 120mVp-p 100mVp-p 100mVp-p 150mVp-p 100mVp-p 100mVp-p 150mVp-p 100mVp-p
CH1: 4.75 ~ 5.5V
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE Note.3
3.0%
7.0%
6.0%
3.0%
6.0%
6.0%
3.0%
+10,-6%
6.0%
3.0%
8.0%
6.0%
LINE REGULATION
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
LOAD REGULATION
3.0%
6.0%
4.0%
3.0%
6.0%
4.0%
3.0%
6.0%
4.0%
3.0%
6.0%
4.0%
800ms, 60ms/230VAC
SETUP, RISE TIME
24ms/230VAC
HOLD TIME (Typ.)
VOLTAGE RANGE
INPUT
TP-100B
OUTPUT NUMBER
24ms/115VAC at full load
Note.5 90 ~ 264VAC
FREQUENCY RANGE
47 ~ 63Hz
POWER FACTOR (Typ.)
PF>0.94/230VAC
EFFICIENCY (Typ.)
75%
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
1.5A/115VAC
COLD START
LEAKAGE CURRENT
800ms, 60ms/115VAC at full load
127 ~ 370VDC
PF>0.98/115VAC at full load
78%
77%
78%
0.75A/230VAC
40A/230V
<3.5mA / 240VAC
105 ~ 150% rated output power
OVER LOAD
PROTECTION OVER VOLTAGE
OVER TEMPERATURE(OPTION)
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
Protection type : Hiccup mode, recovers automatically after fault condition is removed
CH1:5.75 ~ 6.75V on +5V
Protection type : Shut down o/p voltage, re-power on to recover
95
5 (TSW1)
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
-10 ~ +60 (Refer to output load derating curve)
20 ~ 90% RH non-condensing
-20 ~ +85
, 10 ~ 95% RH
SAFETY STANDARDS
0.03%/ (0~50 )
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 Approved
WITHSTAND VOLTAGE
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC 1min.
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
SAFETY & ISOLATION RESISTANCE
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
EMC
(Note 4)
OTHERS
NOTE
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
MTBF
DIMENSION
PACKING
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
170.1K hrs min. MIL-HDBK-217F (25 )
199*99*50mm (L*W*H)
0.83Kg; 20pcs/17.6Kg/1.28CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:TP-100-SPEC 2006-08-22
TP-100
100W Triple Output with PFC Function
Mechanical Specification
Case No. 916A
series
Unit:mm
199
20
168
15
55
+V ADJ.2
+V ADJ.1
5-M3 L=6mm
10
38
4
3
2
1
99
79
51
2-M4
49.5
7.62
LED
9
8
7
6
5
6.15
65
Terminal Pin No. Assignment :
Assignment
Assignment
Pin No.
Pin No.
AC/L
DC OUTPUT V2
1
5
AC/N
DC OUTPUT V1
2
6,7
FG
DC OUTPUT COM
3
8,9
DC OUTPUT V3
4
25
12.5
25
50
25
117
4-M4 L=6mm
Block Diagram
fosc : 100KHz
EMI FILTER
&
RECTIFIERS
I/P
POWER
SWITCHING
PFC
CIRCUIT
PWM & PFC
CONTROL
FG
RECTIFIERS
&
FILTER
RECTIFIERS
&
FILTER
V3
REGULATOR
V2
RECTIFIERS
&
FILTER
+5V
COM
DETECTION CIRCUT
O.V.P.
Derating Curve
Output Derating VS Input Voltage
100
100
90
80
80
70
70
LOAD (%)
LOAD (%)
60
40
20
-10
-10
0
0
10
20
30
40
AMBIENT TEMPERATURE (
50
60
50
40
60 (HORIZONTAL)
90
110
115
135
155
230 264
INPUT VOLTAGE (VAC) 60Hz
)
File Name:TP-100-SPEC 2006-08-22
RSG
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 [email protected] www.rsg-electronic.de
■
■
ELECTRONIC COMPONENTS
■
Änderungen vorbehalten / subject to change without notice
■
■
■