SavantIC Semiconductor Product Specification 2N6106 2N6108 2N6110 Silicon PNP Power Transistors DESCRIPTION ·With TO-220 package ·With short pin APPLICATIONS ·Power amplifier and switching circuits applications PINNING PIN DESCRIPTION 1 Emitter 2 Collector;connected to mounting base 3 Base Fig.1 simplified outline (TO-220) and symbol Absolute maximum ratings(Ta=25 ) SYMBOL PARAMETER CONDITIONS 2N6106 VCBO VCEO Collector-base voltage Collector-emitter voltage 2N6108 Open emitter Emitter-base voltage -60 2N6110 -80 2N6106 -30 2N6108 UNIT -40 Open base 2N6110 VEBO VALUE -50 V V -70 Open collector -5 V IC Collector current -7 A ICM Collector current-peak -10 A IB Base current -3 A PT Total power dissipation 40 W Tj Junction temperature 150 Tstg Storage temperature -65~150 TC=25 THERMAL CHARACTERISTICS SYMBOL Rth j-c PARAMETER Thermal resistance from junction to case MAX UNIT 3.125 /W SavantIC Semiconductor Product Specification 2N6106 2N6108 2N6110 Silicon PNP Power Transistors CHARACTERISTICS Tj=25 unless otherwise specified SYMBOL PARAMETER CONDITIONS 2N6106 VCEO(SUS) Collector-emitter sustaining voltage 2N6108 VBE ICEO ICEX IEBO hFE-1 TYP. MAX UNIT -30 IC=-0.1A ;IB=0 V -50 -70 2N6110 VCEsat MIN Collector-emitter saturation voltage IC=-7A;IB=-3A -3.5 V Base-emitter on voltage IC=-7A ; VCE=-4V -3.0 V -1.0 mA Collector cut-off current Collector cut-off current 2N6106 VCE=-20V; IB=0 2N6108 VCE=-40V; IB=0 2N6110 VCE=-60V; IB=0 2N6106 VCE=-40V; VBE=1.5V VCE=-30V; BE=1.5V,TC=125 -0.1 -2.0 2N6108 VCE=-60V; VBE=1.5V VCE=-50V; BE=1.5V,TC=125 -0.1 -2.0 2N6110 VCE=-80V; VBE=1.5V VCE=-70V; BE=1.5V,TC=125 -0.1 -2.0 VEB=-5V; IC=0 -1.0 Emitter cut-off current DC current gain 2N6106 IC=-2A ; VCE=-4V 2N6108 IC=-2.5A ; VCE=-4V 2N6110 IC=-3A ; VCE=-4V hFE-2 DC current gain IC=-7A ; VCE=-4V COB Output capacitance IE=0 ; VCB=-10V;f=1MHz fT Transition frequency IC=-0.5A ; VCE=-4V;f=1MHz 2 30 mA mA 150 2.3 250 10 pF MHz SavantIC Semiconductor Product Specification Silicon PNP Power Transistors 2N6106 2N6108 2N6110 PACKAGE OUTLINE Fig.2 Outline dimensions(unindicated tolerance:±0.10 mm) 3