OG (Holder) 6.3x32 Fuseholder Blocks & Clips www.schurter.com/pg02b Fuseholder Open Design, 6.3 x 32 mm, THT 250 VAC · 2.5 W / 10 A16 A (UL) Description References Approvals Weblinks Technical Data Fuse-Link Mounting Mounting Terminal Rated Voltage Rated Current Rated Power Acceptance IEC Soldering Methods Solderability -Through hole mounting General Product Information -UL File Number: E39328 Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) 6.3 x 32 mm PCB Screw or Rivet Solder THT 250 VAC 16 A (UL) 2.5 W / 10 A @ Ta 23 °C Admissible power acceptance at higher ambient temperature see derating curves Degree of Protection IP 00 Protection Class Suitable for appliances with protection class 1 or 2 acc. to IEC 61140 Admissible Ambient Air Temp. -40 °C to 85 °C Climatic Category 40/085/21 acc. to IEC 60068-1 Material: Terminals Tin-Plated Copper Alloy Unit Weight (Socket/Cap) 7.23 g Storage Conditions 0 °C to 60 °C, max. 70% r.h. Product Marking Voltage, Current, Approvals Abmessungen Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Wave 235 °C / 2 sec acc. to IEC 60068-2-20, Test Ta, method 1 260 °C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 1A < 5 mΩ at 20 mV > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 41 mm 41 max. 15 ø 6.3 +0.1 0 18.5 3.8 1.3 +0.6 0 4 37.5 ø 3.2 +0.6 37.5 0 0.5 1.1 Drilling diagram Fuses OG (Holder) 6.3x32 Fuseholder Blocks & Clips www.schurter.com/pg02b Derating Curves for Fuseholders Admissible Power Acceptance in Watt 2.5 2.0 I = 1.0 In 1.5 I = 0.7 In I = << In 1.0 0.5 0.0 0 20 40 60 80 100 Ambient Air Temperature Ta °C Variants Holder l Order Number 0031.8002 0853.9561 0853.9562 Packaging Unit Bulk (100 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.