OMH 125 Fuseholder Blocks & Clips www.schurter.com/pg02b Fuseholder Open Design, Holder for OMF 63, OMF 125 and OMT 125, SMD 125 VAC · 5 A (UL/CSA) Description -Suitable for SMD fuse-links OMF 63/OMF 125/OMT 125 References Standards General Product Information Packaging Details Fuseholder to OMF 125; OMF 63; OMT 125 Approvals Weblinks -UL 512 and CSA C22.2 no. 39 Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check, Accessories, Product Change Notification (PCN) -UL File Number: E39328 Technical Data Fuse-Link Mounting Terminal Rated Voltage Rated Current Degree of Protection Admissible Ambient Air Temp. Climatic Category Material: Socket Material: Terminals Unit Weight (Socket/Cap) Storage Conditions Product Marking OMx 63/125 Fuse PCB Solder SMT 125 VAC 5 A (UL/CSA) IP 00 -40 °C to 85 °C 40/085/21 acc. to IEC 60068-1 Thermoplastic, Beige, UL 94V-0 Tin-Plated Copper Alloy 3.9 g 0 °C to 60 °C, max. 70% r.h. , Approvals Abmessungen Soldering Methods Solderability Reflow 245 °C / 3 sec acc. to IEC 60068-2-20, Test Td 260 °C / 10 sec acc. to IEC 60068-2-20, Test Td > 3 kV between L-N (50 Hz; 1 min) > 4 kV between L-N > 10 MΩ between L-N (500 VDC; 1 min) I - III acc. to IEC 60664-1 1 - 3 acc. to IEC 60664-1 Resistance to Soldering Heat Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree 12 mm 6 6 1.2 12 5 3 5.2 4.3 Soldering pads Packaging Unit .xx = .11Plastic Bag (100 pcs.) .xx = .22Blister Tape 33 cm Reel (750 pcs.) .xx = .23Blister Tape 33 cm Reel (1500 pcs.) The specifications, descriptions and illustrations indicated in this document are based on Fuses current information. All content is subject to modifications and amendments.