DTC113ZE/DTC113ZUA/DTC113ZKA /DTC113ZCA/DTC113ZSA Elektronische Bauelemente Digital Transistors NPN (Built-in Resistors) FEATURES * Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). * Only the on/off confitions need to be set for operation making device design easy. * The bias resistors consis of thin-film resistors with compete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. Pin Connenctions And Marking DTC113ZE SOT-523 DTC113ZUA Abbreviated symbol: E21 DTC113ZKA SOT-323 Abbreviated symbol: E21 DTC113ZCA DTA113ZCA SOT-23 SOT-23-3L Abbreviated symbol: E21 SOT-23 Abbreviated symbol:E21 DTC113ZSA TO-92S http://www.SeCoSGmbH.com 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 1 of 2 DTC113ZE/DTC113ZUA/DTC113ZKA /DTC113ZCA/DTC113ZSA Elektronische Bauelemente Digital Transistors NPN (Built-in Resistors) Absolute maximum ratings(Ta=25℃) Limits (DTC113Z□) Parameter Symbol Supply voltage VCC 50 V Input voltage VIN -5~+10 V IO 100 IC(MAX) 100 Output current E UA CA 150 KA SA Unit mA Power dissipation Pd 200 300 mW Junction temperature Tj 150 ℃ Storage temperature Tstg -55~150 ℃ Electrical characteristics (Ta=25℃) Parameter Input voltage Symbol Min. Typ VI(off) VI(on) Max. 0.3 3 Unit V Conditions VCC=5V ,IO=100µA VO=0.3V ,IO=20 mA Output voltage VO(on) 0.3 V IO/II=10mA/0.5mA Input current II 7.2 mA VI=5V Output current IO(off) 0.5 µA VCC=50V, VI=0 DC current gain GI 33 Input resistance R1 0.7 1 1.3 Resistance ratio R2/R1 8 10 12 Transition frequency fT VO=5V ,IO=5mA 250 KΩ MHz VCE=10V ,IE=-5mA,f=100MHz Typical Characteristics http://www.SeCoSGmbH.com 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 2