DTA144EE / DTA144EUA / DTA144ECA / DTA144ESA PNP Digital Transistors (Built-in Resistors) Elektronische Bauelemente RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). The bias resistors consist of thin-film resistors with complete isolation to allow positive biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. Only the on/off conditions need to be set for operation, making device design easy. DTA144EE (SOT-523) DTA144EUA (SOT-323) Abbreviated symbol：16 Abbreviated symbol：16 DTA144ESA (TO-92S) DTA144ECA (SOT-23) EQUIVALENT CIRCUIT Abbreviated symbol：16 ABSOLUTE MAXIMUM RATINGS (TA=25°C unless otherwise noted) Parameter Rating Symbol E UA Unit CA SA Supply voltage VCC -50 V Input voltage VIN -40 ~ 10 V IO -30 IC(MAX) -100 Output current Collector Dissipation Junction & Storage temperature PC 150 mA 200 TJ, TSTG 300 mW 150, -55~150 °C ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Parameter Input voltage Symbol Min. Typ. Max. VI(off) -0.5 - - Unit V Test Conditions vCC= -5V, IO= -100μA VI(on) - - -3 VO(on) - - -0.3 V IO/Il= -10mA / -0.5mA II - - -0.18 μA Vl= -5V Output current IO(off) - - -0.5 μA vCC= -50V, VI=0 DC current gain GI 68 - - Input resistance R1 32.9 47 61.1 V Transition frequency fT - 250 - MHz R1 / R2 0.8 1 1.2 KΩ Output voltage Input current Resistance ratio http://www.SeCoSGmbH.com/ 18-Oct-2011 Rev. B vO= -0.3V, IO= -2mA VO= -5V, IO= -5mA VO= -10V, IC= -5mA, f=100MHz Any changes of specification will not be informed individually. Page 1 of 2 DTA144EE / DTA144EUA / DTA144ECA / DTA144ESA Elektronische Bauelemente PNP Digital Transistors (Built-in Resistors) CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 18-Oct-2011 Rev. B Any changes of specification will not be informed individually. Page 2 of 2