DTA114YE / DTA114YUA / DTA114YSA / DTA114YCA Elektronische Bauelemente PNP Digital Transistors (Built-in Resistors) RoHS Compliant Product A suffix of “-C” specifies halogen & lead-free FEATURES Built-in bias resistors enable the configuration of an inverter circuit without connecting input resistors (see equivalent circuit). Only the on/off conditions need to be set for operation, making device design easy. The bias resistors consist of thin-film resistors with complete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. DTA114YE (SOT-523) DTA114YUA (SOT-323) : In : In : Gnd : Gnd : Out : Out DTA114YSA (TO-92S) DTA114YCA (SOT-23) : In : In : Out : Gnd : Gnd : Out EQUIVALENT CIRCUIT ABSOLUTE MAXIMUM RATINGS at Ta = 25°C Parameter Ratings Symbol E UA Unit CA SA Supply voltage VCC -50 V Input voltage VIN -40 ~ +6 V Output current Power dissipation Junction & Storage temperature IO -70 IC(MAX) -100 PC 150 mA 200 TJ, TSTG 300 mW 150, -55~150 ℃ ABSOLUTE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS at Ta = 25°C Parameter Input voltage Output voltage Symbol Min. Typ. Max. VI(OFF) - - -0.3 VI(ON) -1.4 - - VO(ON) - - -0.3 V Unit V Test Conditions VCC=-5V, IO=-100μA VO=-0.3V, IO=-1mA IO/II=-5mA/-0.25mA II - - -0.88 mA VI=5V IO(OFF) - - -0.5 A VCC=-50V, VI=0 DC current gain GI 68 - - Input resistance R1 7 10 13 Resistance ratio R2 / R1 3.7 4.7 5.7 fT - 250 - Input current Output current Transition frequency http://www.SeCoSGmbH.com/ 01-July-2009 Rev. B VO=-5V, IO=-5mA K MHz VO=-10V, IO=5mA, f=100MHz Any changes of specification will not be informed individually. Page 1 of 2 DTA114YE / DTA114YUA / DTA114YSA / DTA114YCA Elektronische Bauelemente PNP Digital Transistors (Built-in Resistors) CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ 01-July-2009 Rev. B Any changes of specification will not be informed individually. Page 2 of 2