DTC114EE/DTC114EUA/DTC114EKA /DTC114ESA/DTC114ECA Digital Transistors NPN (Built-in Resistors) Elektronische Bauelemente FEATURES * Built-in bias resistors enable the configuration of an inverter circuit without connecting external input resistors (see equivalent circuit). * Only the on/off confitions need to be set for operation making device design easy. * The bias resistors consis of thin-film resistors with compete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. External dimensions (Units:mm ) SOT-323 SOT-523 SOT-323 SOT-23-3L SOT-23 TO-92S Absolute maximum ratings(Ta=25℃) Limits (DTC114E□) Parameter Symbol Supply voltage VCC 50 V Input voltage VIN -10~40 V IO 50 IC(MAX) 100 Output current E UA CA KA SA Unit mA Power dissipation Pd Junction temperature Tj 150 ℃ Storage temperature Tstg -55~150 ℃ http://www.SeCoSGmbH.com 01-Jun-2002 Rev. A 150 200 300 mW Any changing of specification will not be informed individual Page 1 of 2 DTC114EE/DTC114EUA/DTC114EKA /DTC114ESA/DTC114ECA Digital Transistors NPN (Built-in Resistors) Elektronische Bauelemente Electrical characteristics (Ta=25℃) Parameter Input voltage Symbol Min. Typ VI(off) VI(on) Max. 0.5 3 Unit V Conditions VCC=5V ,IO=100µA VO=0.3V ,IO=10 mA Output voltage VO(on) 0.3 V IO/II=10mA/0.5mA Input current II 0.88 mA VI=5V Output current IO(off) 0.5 µA VCC=50V, VI=0 DC current gain GI 30 Input resistance R1 7 10 13 Resistance ratio R2/R1 0.8 1 1.2 Transition frequency fT VO=5V ,IO=5mA 250 KΩ MHz VCE=10V ,IE=-5mA,f=100MHz Typical Characteristics http://www.SeCoSGmbH.com 01-Jun-2002 Rev. A Any changing of specification will not be informed individua Page 2 of 2