Elektronische Bauelemente DTA143ZE/DTA143ZUA/DTA143ZCA/ DTA143ZSA PNP Digital Transistors (Built-in Resistors) FEATURES * Built-in bias resistors enable the configuration of an inverter circuit without connecting input resistors (see equivalent circuit). * Only the on/off confitions need to be set for operation, making device design easy. * The bias resistors consis of thin-film resistors with compete isolation to allow negative biasing of the input. They also have the advantage of almost completely eliminating parasitic effects. PIN CONNENCTIONS AND MARKING DTA143ZUA DTA143ZE SOT-523 Abbreviated symbol: E13 SOT-323 DTA143ZSA DTA143ZCA DTA114ECA TO-92S SOT-23 http://www.SeCoSGmbH.com 01-Jun-2002 Rev. A Abbreviated symbol: 113 Abbreviated symbol: E13 Any changing of specification will not be informed individual Page 1 of 2 DTA143ZE/DTA143ZUA/DTA143ZCA/ DTA143ZSA Elektronische Bauelemente PNP Digital Transistors (Built-in Resistors) Absolute maximum ratings(Ta=25℃) Limits (DTA143Z□ ) Parameter Symbol Supply voltage VCC -50 V Input voltage VIN -30~5 V IO -100 IC(MAX) -100 Output current E UA 150 CA 200 SA Unit mA Power dissipation Pd 300 mW Junction temperature Tj 150 ℃ Storage temperature Tstg -55~150 ℃ Electrical characteristics (Ta=25℃) Parameter Input voltage Symbol Min. Typ VI(off) VI(on) Max. -0.5 -1.3 Unit V Conditions VCC=-5V ,IO=-100µA VO=-0.3V ,IO=-5 mA Output voltage VO(on) -0.3 V IO/II=-5mA/-0.25mA Input current II -1.8 mA VI=-5V Output current IO(off) -0.5 µA VCC=-50V ,VI=0 DC current gain GI 80 Input resistance R1 3.29 4.7 6.11 Resistance ratio R2/R1 8 10 12 Transition frequency fT VO=-5V ,IO=-10mA 250 KΩ MHz VO=-10V ,IO=-5mA,f=100MHz Typical Characteristics http://www.SeCoSGmbH.com 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 2