BVDSS = 650 V RDS(on) typ = 10.5 Ω HFD1N65 / HFU1N65 ID = 0.8 A 650V N-Channel MOSFET D-PAK I-PAK 2 FEATURES 1 1 2 3 Originative New Design 3 HFD1N65 Superior Avalanche Rugged Technology Robust Gate Oxide Technology 1.Gate 2. Drain 3. Source D Very Low Intrinsic Capacitances Excellent Switching Characteristics Unrivalled Gate Charge : 4.0 nC (Typ.) Extended Safe Operating Area G Lower RDS(ON) : 10.5 Ω (Typ.) @VGS=10V 100% Avalanche Tested Absolute Maximum Ratings Symbol HFU1N65 S TC=25℃ unless otherwise specified Parameter Value Units 650 V VDSS Drain-Source Voltage ID Drain Current – Continuous (TC = 25℃) 0.8 A Drain Current – Continuous (TC = 100℃) 0.5 A IDM Drain Current – Pulsed 3.2 A VGS Gate-Source Voltage ±30 V EAS Single Pulsed Avalanche Energy (Note 2) 40 mJ IAR Avalanche Current (Note 1) 0.8 A EAR Repetitive Avalanche Energy (Note 1) 3.1 mJ dv/dt Peak Diode Recovery dv/dt (Note 3) 5.5 V/ns PD Power Dissipation (TA = 25℃) * 2.5 W Power Dissipation (TC = 25℃) - Derate above 25℃ 31 W 0.25 W/℃ -55 to +150 ℃ 300 ℃ (Note 1) TJ, TSTG Operating and Storage Temperature Range TL Maximum lead temperature for soldering purposes, 1/8” from case for 5 seconds Thermal Resistance Characteristics Symbol Parameter Typ. Max. RθJC Junction-to-Case -- 4.0 RθJA Junction-to-Ambient* -- 50 RθJA Junction-to-Ambient -- 110 Units ℃/W * When mounted on the minimum pad size recommended (PCB Mount) ◎ SEMIHOW REV.A0,Apr 2006 HFD1N65 / HFU1N65 April 2006 Symbol Parameter unless otherwise specified Test Conditions Min Typ Max Units On Characteristics VGS RDS(ON) Gate Threshold Voltage VDS = VGS, ID = 250 ㎂ 2.5 -- 4.5 V Static Drain-Source On-Resistance VGS = 10 V, ID = 0.4 A -- 10.5 13.5 Ω VGS = 0 V, ID = 250 ㎂ 650 -- -- V ID = 250 ㎂, Referenced to25℃ -- 0.65 -- V/℃ VDS = 650 V, VGS = 0 V -- -- 1 ㎂ VDS = 520 V, TC = 125℃ -- -- 10 ㎂ Off Characteristics BVDSS Drain-Source Breakdown Voltage ΔBVDSS Breakdown Voltage Temperature Coefficient /ΔTJ IDSS Zero Gate Voltage Drain Current IGSSF Gate-Body Leakage Current, Forward VGS = 30 V, VDS = 0 V -- -- 100 ㎁ IGSSR Gate-Body Leakage Current, Reverse VGS = -30 V, VDS = 0 V -- -- -100 ㎁ -- 150 195 ㎊ -- 23 30 ㎊ -- 5.5 7.0 ㎊ -- 12 30 ㎱ -- 40 140 ㎱ -- 20 60 ㎱ -- 30 80 ㎱ -- 4.0 5.5 nC -- 1.0 -- nC -- 2.0 -- nC Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance VDS = 25 V, VGS = 0 V, f = 1.0 MHz Switching Characteristics td(on) Turn-On Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time Qg Total Gate Charge Qgs Gate-Source Charge Qgd VDS = 325 V, ID = 0.8 A, RG = 25 Ω (Note 4,5) VDS = 520 V, ID = 0.8 A, VGS = 10 V (Note 4,5) Gate-Drain Charge Source-Drain Diode Maximum Ratings and Characteristics IS Continuous Source-Drain Diode Forward Current -- -- 0.8 ISM Pulsed Source-Drain Diode Forward Current -- -- 3.2 VSD Source-Drain Diode Forward Voltage IS = 0.8 A, VGS = 0 V -- -- 1.4 V trr Reverse Recovery Time -- 160 -- ㎱ Qrr Reverse Recovery Charge IS = 0.8 A, VGS = 0 V diF/dt = 100 A/μs (Note 4) -- 0.45 -- μC A Notes ; 1. Repetitive Rating : Pulse width limited by maximum junction temperature 2. L=115mH, IAS=0.8A, VDD=50V, RG=25Ω, Starting TJ =25°C 3. ISD≤0.8A, di/dt≤300A/μs, VDD≤BVDSS , Starting TJ =25 °C 4. Pulse Test : Pulse Width ≤ 300μs, Duty Cycle ≤ 2% 5. Essentially Independent of Operating Temperature ◎ SEMIHOW REV.A0,Apr 2006 HFD1N65 / HFU1N65 Electrical Characteristics TC=25 °C HFD1N65 / HFU1N65 Typical Characteristics Figure 1. On Region Characteristics Figure 2. Transfer Characteristics RDS(on) , [Ω] Drain-Source On-Resistance 40 35 30 VGS = 10V 25 VGS = 20V 20 15 ※ Note : TJ = 25 ℃ 10 0.0 0.5 1.0 1.5 2.0 2.5 3.0 ID , Drain Current [A] Figure 4. Body Diode Forward Voltage Variation with Source Current and Temperature Figure 3. On Resistance Variation vs Drain Current and Gate Voltage 12 Ciss Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd Capacitances [pF] 200 150 Coss 100 ※ Note ; 1. VGS = 0 V 2. f = 1 MHz Crss 50 VGS, Gate-Source Voltage [V] 250 VDS = 130V 10 VDS = 325V 8 VDS = 520V 6 4 2 ※ Notes : ID = 0.8 A 0 -1 10 0 0 10 1 10 VDS, Drain-Source Voltage [V] Figure 5. Capacitance Characteristics 0 1 2 3 4 5 QG, Total Gate Charge [nC] Figure 6. Gate Charge Characteristics ◎ SEMIHOW REV.A0,Apr 2006 HFD1N65 / HFU1N65 Typical Characteristics (continued) Figure 8. On-Resistance Variation vs Temperature Figure 7. Breakdown Voltage Variation vs Temperature 1 1.0 10 Operation in This Area is Limited by R DS(on) 0.8 ID, Drain Current [A] 1 ms 0 10 10 ms DC -1 10 ※ Notes : o 1. TC = 25 C o 2. TJ = 150 C 3. Single Pulse 0 10 0.6 0.4 0.2 0.0 25 -2 10 1 2 10 3 10 10 50 75 100 125 150 TC, Case Temperature [ ℃] VDS, Drain-Source Voltage [V] Figure 9. Maximum Safe Operating Area Figure 10. Maximum Drain Current vs Case Temperature D=0.5 Zθ JC(t), Thermal Response ID, Drain Current [A] 100 µs 0 10 0.2 ※ Notes : 1. Zθ JC(t) = 4.0 ℃/W Max. 2. Duty Factor, D=t1/t2 3. TJM - TC = PDM * Zθ JC(t) 0.1 0.05 PDM 0.02 0.01 -1 10 t1 single pulse -5 10 -4 10 -3 10 -2 10 -1 10 t2 0 10 1 10 t1, Square Wave Pulse Duration [sec] Figure 11. Transient Thermal Response Curve ◎ SEMIHOW REV.A0,Apr 2006 HFD1N65 / HFU1N65 Fig 12. Gate Charge Test Circuit & Waveform 50KΩ 12V VGS Same Type as DUT Qg 200nF 10V 300nF VDS VGS Qgs Qgd DUT 3mA Charge Fig 13. Resistive Switching Test Circuit & Waveforms RL VDS VDS 90% VDD RG ( 0.5 rated VDS ) Vin DUT 10V 10% tr td(on) td(off) t on tf t off Fig 14. Unclamped Inductive Switching Test Circuit & Waveforms BVDSS 1 EAS = ---- LL IAS2 -------------------2 BVDSS -- VDD L VDS VDD ID BVDSS IAS RG 10V ID (t) DUT VDS (t) VDD tp Time ◎ SEMIHOW REV.A0,Apr 2006 HFD1N65 / HFU1N65 Fig 15. Peak Diode Recovery dv/dt Test Circuit & Waveforms DUT + VDS _ IS L Driver RG VGS VGS ( Driver ) Same Type as DUT VDD • dv/dt controlled by RG • IS controlled by pulse period Gate Pulse Width D = -------------------------Gate Pulse Period 10V IFM , Body Diode Forward Current IS ( DUT ) di/dt IRM Body Diode Reverse Current VDS ( DUT ) Body Diode Recovery dv/dt Vf VDD Body Diode Forward Voltage Drop ◎ SEMIHOW REV.A0,Apr 2006 HFD1N65 / HFU1N65 Package Dimension TO-252 2.3±0.1 6.6±0.2 1.2±0.3 9.7+0.5 -0.3 2.7±0.3 0.5±0.05 5.6±0.2 1±0.2 5.35±0.15 1.2±0.3 0.05+0.1 -0.05 0.8±0.2 0.6±0.2 0.5+0.1 -0.05 2.3typ 2.3typ ◎ SEMIHOW REV.A0,Apr 2006 HFD1N65 / HFU1N65 TO-251 2.3±0.1 6.6±0.2 5.35±0.15 0.75±0.15 0.8±0.15 0.6±0.1 2.3typ 7±0.2 7.5±0.3 5.6±0.2 0.5±0.05 0.5+0.1 -0.05 1.2±0.3 2.3typ ◎ SEMIHOW REV.A0,Apr 2006