TI CD4504B-EP

CD4504B-EP
www.ti.com .......................................................................................................................................................................................... SCHS369 – NOVEMBER 2008
CMOS HEX VOLTAGE-LEVEL SHIFTER
FOR TTL-TO-CMOS or CMOS-TO-CMOS OPERATION
FEATURES
1
•
•
•
•
•
•
•
•
Independence of Power-Supply Sequence
Considerations – VCC Can Exceed VDD;
Input Signals Can Exceed Both VCC and VDD
Up and Down Level-Shifting Capability
Shiftable Input Threshold for Either CMOS or
TTL Compatibility
Standardized Symmetrical Output
Characteristics
100% Tested for Quiescent Current at 20 V
Maximum Input Current of 1 µA at 18 V Over
Full Package-Temperature Range:
100 nA at 18 V and 25°C
5 V, 10 V, and 15 V Parametric Ratings
Meets All Requirements of JEDEC Standard
No. 13B, "Standard Specifications for
Description of 'B' Series CMOS Devices"
SUPPORTS DEFENSE, AEROSPACE,
AND MEDICAL APPLICATIONS
•
•
•
•
•
•
•
Controlled Baseline
One Assembly/Test Site
One Fabrication Site
Available in Military (–55°C/125°C)
Temperature Range (1)
Extended Product Life Cycle
Extended Product-Change Notification
Product Traceability
(TO P V IE W )
VCC
1
16
VDD
AOUT
2
15
FOUT
AIN
3
14
FIN
BOUT
4
13
SELECT
BIN
5
12
EOUT
COUT
6
11
EIN
7
10
DOUT
8
9
CIN
VSS
(1)
DIN
Additional temperature ranges are available – contact factory
DESCRIPTION
CD4504B hex voltage level-shifter consists of six circuits which shift input signals from the VCC logic level to the
VDD logic level. To shift TTL signals to CMOS logic levels, the SELECT input is at the VCC HIGH logic state.
When the SELECT input is at a LOW logic state, each circuit translates signals from one CMOS level to another.
ORDERING INFORMATION (1)
PACKAGE (2)
TA
–55°C to 125°C
(1)
(2)
TSSOP – PW
Reel of 2000
ORDERABLE PART NUMBER
CD4504BMPWREP
TOP-SIDE MARKING
4504BEP
Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI
website at www.ti.com.
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2008, Texas Instruments Incorporated
CD4504B-EP
SCHS369 – NOVEMBER 2008 .......................................................................................................................................................................................... www.ti.com
FUNCTIONAL BLOCK DIAGRAM
ABSOLUTE MAXIMUM RATINGS
over operating free-air temperature range (unless otherwise noted)
VDD
MIN
MAX
UNIT
DC supply-voltage range, voltages referenced to VSS terminal
–0.5
+20
V
Input voltage range, all inputs
–0.5
VCC + 0.5
DC input current, any one input
TA = –55°C to +100°C
PD
Power dissipation per package
Operating temperature range
θJA
Package thermal impedance (1)
Tstg
Storage temperature range
2
500
mW
100
–55
–85
Lead temperature (during soldering), at distance 1/16 ± 1/32 inch (1.59 ± 0.79 mm) from case for
10 s max
(1)
mA
Derate Linearly at 12 mW/°C to
200 nW
TA = +100°C to +125°C
Device dissipation per output transistor,
for TA = full package-temperature range (all package types)
TA
V
±10
mW
+125
°C
91.1
°C/W
+150
°C
+265
°C
The package thermal impedance is calculated in accordance with JESD 51-7.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): CD4504B-EP
CD4504B-EP
www.ti.com .......................................................................................................................................................................................... SCHS369 – NOVEMBER 2008
STATIC ELECTRICAL CHARACTERISTICS
over operating free-air temperature range (unless otherwise noted)
CONDITIONS
CHARACTERISTIC
VO
(V)
Quiescent device current,
IDD max and ICC in CMOS-CMOS mode
Quiescent device current,
ICC max TTL-CMOS mode
Output low (sink) current,
IOL min
Output high (source) current,
IOH min
–55
–40
+85
+125
+25
MIN
UNIT
TYP
MAX
0, 5
5
5
1.5
1.5
1.5
1.5
0.02
1.5
0, 10
5
10
2
2
2
2
0.02
2
0, 15
5
15
4
4
120
120
0.02
4
0, 20
5
20
20
20
600
600
0.04
20
0, 5
5
5
5
5
6
6
2.5
5
0, 10
5
10
5
5
6
6
2.5
5
0, 15
5
2.5
5
15
5
5
6
6
5
0.64
0.61
0.42
0.36
0.51
1
0.5
0, 10
10
1.6
1.5
1.1
0.9
1.3
2.6
1.5
0, 15
15
4.2
4
2.8
2.4
3.4
6.8
4.6
0, 5
5
–0.64
–0.61
–0.42
–0.36
–0.51
–1
2.5
0, 5
5
–2
–1.8
–1.3
–1.15
–1.6
–3.2
9.5
0, 10
10
–1.6
–1.5
–1.1
–0.9
–1.3
–2.6
13.5
0, 15
15
–4.2
–4
–2.8
–2.4
–3.4
–6.8
0, 5
5
0.05
0
0.05
0, 10
10
0.05
0
0.05
0, 15
15
0.05
0
0.05
0, 5
5
4.95
0, 10
10
0, 15
15
4.95
5
9.95
9.95
10
14.95
14.95
15
1
5
10
0.8
0.8
TTL-CMOS
1
5
15
0.8
0.8
CMOS-CMOS
1
5
10
1.5
1.5
CMOS-CMOS
1.5
5
15
1.5
1.5
CMOS-CMOS
1.5
10
15
3
TTL-CMOS
9
5
10
2
TTL-CMOS
5
15
2
2
9
5
10
3.5
3.5
CMOS-CMOS
13.5
5
15
3.5
3.5
CMOS-CMOS
13.5
10
15
7
7
±0.1
±0.1
mA
V
3
13.5
18
µA
2
CMOS-CMOS
0, 18
mA
mA
TTL-CMOS
Input current, IIN max
(1)
VCC
(V)
0, 5
Output voltage:
high-level, VOH min
Input high voltage,
VIH min (1)
VCC
(V)
0.4
Output voltage:
low-level, VOL max
Input low voltage,
VIL max (1)
VIN
(V)
LIMITS AT INDICATED TEMPERATURES (°C)
±1
±1
±10–5
±0.1
µA
Applies to the six input signals. For mode control (P13), only the CMOS-CMOS ratings apply.
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): CD4504B-EP
3
CD4504B-EP
SCHS369 – NOVEMBER 2008 .......................................................................................................................................................................................... www.ti.com
Figure 1. Typical Output Low (sink) Current Characteristics
Figure 2. Minimum Output Low (sink) Current Characteristics
Figure 3. Typical Output High (source) Current Characteristics
4
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): CD4504B-EP
CD4504B-EP
www.ti.com .......................................................................................................................................................................................... SCHS369 – NOVEMBER 2008
Figure 4. Minimum Output High (source) Current Characteristics
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): CD4504B-EP
5
CD4504B-EP
SCHS369 – NOVEMBER 2008 .......................................................................................................................................................................................... www.ti.com
RECOMMENDED OPERATING CONDITIONS
For maximum reliability, nominal operating conditions should be selected so that operation is always within the following
ranges:
CHARACTERISTIC
VDD
Supply-voltage range (for TA = full package temperature range)
MIN
MAX
5
18
UNIT
V
DYNAMIC ELECTRICAL CHARACTERISTICS
TA = 25°C, Input tr,tf = 20 ns, CL = 50 pF, RL = 200 Ω
CHARACTERISTIC
SHIFTING MODE
TTL to CMOS
VDD > VCC
tPHL
Propagation delay: high-to-low,
CMOS to CMOS
VDD > VCC
CMOS to CMOS
VCC > VDD
TTL to CMOS
VDD > VCC
tPLH
Propagation delay: low-to-high
CMOS to CMOS
VDD > VCC
CMOS to CMOS
VCC > VDD
tTHL, tTLH
CIN
Transition time
Input capacitance
All modes
Any input
LIMITS
VCC
(V)
VDD
(V)
TYP
5
10
140
280
5
15
140
280
5
10
120
240
5
15
120
240
10
15
70
140
10
5
275
550
15
5
275
550
15
10
70
140
5
10
140
280
5
15
140
280
5
10
120
240
5
15
120
240
10
15
70
140
10
5
200
400
15
5
200
400
15
10
60
120
5
100
200
10
50
100
15
40
80
5
7.5
MAX
UNIT
ns
ns
ns
pF
Figure 5. Quiescent Device Current
6
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): CD4504B-EP
CD4504B-EP
www.ti.com .......................................................................................................................................................................................... SCHS369 – NOVEMBER 2008
Figure 6. Input Current
Figure 7. Input Voltage
Figure 8. Typical Input Switching as a Function of
High-Level Supply Voltage (SELECT at VCC – CMOS
Mode
Figure 9. Typical Input Switching as a Function of
High-Level Supply Voltage (SELECT at VSS – TTL Mode)
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): CD4504B-EP
7
CD4504B-EP
SCHS369 – NOVEMBER 2008 .......................................................................................................................................................................................... www.ti.com
Figure 10. High-Level Supply Voltage vs. Low-Level
Supply Voltage
A.
Dimensions in parentheses are in millimeters and are derived form the basic inch dimensions as indicated. Grid
graduations are in mils (10–3 inch).
Figure 11. Dimensions and Pad Layout
8
Submit Documentation Feedback
Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): CD4504B-EP
PACKAGE OPTION ADDENDUM
www.ti.com
17-Nov-2008
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
CD4504BMPWREP
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
V62/09606-01XE
ACTIVE
TSSOP
PW
16
2000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF CD4504B-EP :
CD4504B
• Catalog:
• Military: CD4504B-MIL
NOTE: Qualified Version Definitions:
- TI's standard catalog product
• Catalog
• Military - QML certified for Military and Defense Applications
Addendum-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
17-Nov-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
CD4504BMPWREP
Package Package Pins
Type Drawing
TSSOP
PW
16
SPQ
Reel
Reel
Diameter Width
(mm) W1 (mm)
2000
330.0
12.4
Pack Materials-Page 1
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
7.0
5.6
1.6
8.0
W
Pin1
(mm) Quadrant
12.0
Q1
PACKAGE MATERIALS INFORMATION
www.ti.com
17-Nov-2008
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
CD4504BMPWREP
TSSOP
PW
16
2000
346.0
346.0
29.0
Pack Materials-Page 2
MECHANICAL DATA
MTSS001C – JANUARY 1995 – REVISED FEBRUARY 1999
PW (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PINS SHOWN
0,30
0,19
0,65
14
0,10 M
8
0,15 NOM
4,50
4,30
6,60
6,20
Gage Plane
0,25
1
7
0°– 8°
A
0,75
0,50
Seating Plane
0,15
0,05
1,20 MAX
PINS **
0,10
8
14
16
20
24
28
A MAX
3,10
5,10
5,10
6,60
7,90
9,80
A MIN
2,90
4,90
4,90
6,40
7,70
9,60
DIM
4040064/F 01/97
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters.
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion not to exceed 0,15.
Falls within JEDEC MO-153
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
RF/IF and ZigBee® Solutions
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lprf
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated