1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Product features 3216 fixed lens type, Water clear epoxy Package Product features ・Outer Dimension 3.2 x 1.6 x 1.85mm( L x W x H ) ・Wide operation temperature range. Storage Temperature : InGaN : -40℃～110℃ : AlGaInP : -40℃～120℃ Operating Temperature : -40℃～100℃ Operation Guarantee ・Ramification of luminosity group sorting. It is possible to have a uniform transmission with little irregularities even when several are lined up. ・Systematization of luminosity groups and color tone groups. Unified to a simple standard. ・Corresponding to a use requiring high reliability in cars etc... ・Surface Mount Type and Reverse Mount Type are possible. ・Shape resin into a lens to make high luminosity possible. ・Lead–free soldering compatible ・RoHS compliant Dominant wavelength Blue Green Yellow Green Yellow Orange Red Spatial distribution VUB,VUG：20deg. VYBG,VYPY,VFY,VFA,VFV,VFR：40 deg. Die materials VUB,VUG : InGaN VYBG, VYPY, VFY, VFA, VFV, VFR :AlGaInP Optical efficiency VUB : 10.9lm/W VYBG : 1.3lm/W VFY : 11.8lm/W VFV : 13.2lm/W VUG : 23.6lm/W VYPY : 4.8lm/W VFA : 11.8lm/W VFR : 11.8lm/W Rank grouping parameter Sorted by luminous intensity and wavelength and taped according to rank. Assembly methods (customer) Corresponding to surface mounter. Soldering methods Corresponding to reflow soldering and manual soldering. Taping dimensions 2,000pcs(standard) per reel in a 8mm width tape. Reel diameter : φ180mm ESD AlGaInP:2kV (HBM) : : : : : : 470nm (VUB) 530nm (VUG) , 562nm(VYBG) 572nm (VYPY) 590nm (VFY) 605nm (VFA) 615nm (VFV) , 626nm (VFR) InGaN:1kV (HBM) Recommended Applications SW lighting for car indicators, meter panel, car audio and heater control, etc… 2007.8.31 Page 1 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Color Variations and Luminous Intensity Part No. Material Emitted Color VUB1105W InGaN VUG1105W InGaN VYBG1105W AlGaInP VYPY1105W AlGaInP Yellow Green VFY1105W AlGaInP Yellow VFA1105W AlGaInP Orange VFV1105W AlGaInP Lens Color Blue (Ta=25℃) Dominant Wavelength Luminous Intensity Luminous Flux λd (nm) Iv (mcd) φv(mlm) TYP. IF MIN. MAX. IF TYP. IF 470 10 120 470 10 350 10 530 10 560 2,200 10 780 10 562 20 39 150 20 55 20 572 20 100 390 20 200 20 590 20 330 1,200 20 450 20 605 20 330 1,200 20 450 20 615 20 560 820 20 500 20 626 20 330 1,200 20 450 20 Green Water Clear Red VFR1105W AlGaInP ※Note : The luminous intensity(Iv) and dominant wavelength (λd) above are the setup values of the sorting machine. (Tolerance : IV… ±10%, λd ... ±1nm) 2006.3.31 Page 2 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Absolute Maximum Ratings Item Symbol Power Dissipation Forward Current Pulse Forward Current ※ 1 Derating (Ta=75℃ or higher) (Ta=25℃) Absolute Maximum Ratings Unit VUB VUG VYBG VYPY VFY VFA VFV VFR Pd 84 84 81 81 78 78 78 78 mW IF 20 20 30 30 30 30 30 30 mA IFRM 48 48 100 100 100 100 100 100 mA ⊿ IF 0.40※ 2 0.40※ 2 1.0 1.0 1.0 1.0 1.0 1.0 mA/℃ ⊿ IFRM 0.96※ 2 0.96※ 2 3.33 3.33 3.33 3.33 3.33 3.33 mA/℃ 5 5 5 5 5 5 V Reverse Voltage VR Operating Temperature Topr Storage Temperature Tstg 5 5 ℃ -40～ +100 -40～ +110 ℃ -40～+120 ※1 IFRM Measurement condition : Pulse Width ≦1ms., Duty ≦ 1/20. ※2 Temperature Condition: Ta=60℃ or higher. Thermal Characteristics Item Symbol Junction Temperature (MAX.) Thermal Resistance (TYP.) Ratings Unit VUB VUG VYBG VYPY VFY VFA VFV VFR Tj 110 110 120 120 120 120 120 120 ℃ R(th j-a) 600 600 700 650 650 650 650 650 ℃ /W R(th j-s) 400 400 500 450 450 450 450 450 ℃ /W (Junction/ ambient) Thermal Resistance (TYP.) (Junction/ Solder Point) ※Rth(j-a) Measurement Condition / Substrate: FR4(t=1.6mm) Pattern Size: 16mm . 2 2009.3.27 Page 3 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Electro-Optical Characteristics （VUB,VUG) Item Characteristic Ratings Symbol Conditions Forward Voltage IF=10mA (Ta=25℃) Unit VUB VUG TYP. 3.3 3.3 MAX. 3.8 3.8 VF V Reverse Current VR =5V IR MAX. 100 100 μA Peak Wavelength IF=10mA λp TYP. 465 522 nm IF=10mA λd TYP. 470 530 nm IF=10mA ⊿λ TYP. 26 35 nm IF=10mA 2θ1/2 TYP. 20 20 deg. Dominant Wavelength Spectral Line Half Width Half Intensity Angle ※Note: The dominant wave length (λd) above is the setup value of the sorting machine. （Tolerance : λd…±1nm） Electro-Optical Characteristics（VYBG, VYPY, VFY, VFA, VFV, VFR) Item Forward Voltage Conditions IF=20mA (Ta=25℃) Characteristic Rating Symbol VYBG VYPY VFY VFA VFV VFR TYP. 2.1 2.1 1.9 1.9 1.9 1.9 MAX. 2.5 2.5 2.4 2.4 2.4 2.4 VF Unit V Reverse Current VR =5V IR MAX. 100 100 100 100 100 100 μA Peak Wavelength IF=20mA λp TYP. 565 575 592 609 624 635 nm IF=20mA λd TYP. 562 572 590 605 615 626 nm IF=20mA ⊿λ TYP. 15 15 15 15 15 15 nm IF=20mA 2θ1/2 TYP. 40 40 40 40 40 40 deg. Dominant Wavelength Spectral Line Half Width Half Intensity Angle ※Note: The dominant wave length (λd) above is the setup value of the sorting machine. （Tolerance : λd…±1nm） 2006.3.31 Page 4 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Luminous Intensity Rank (Ta=25℃) Standard Chart（Unit: mcd） Rank B5 B6 B7 B8 B9 BX BY BZ C1 C2 C3 C4 C5 C6 C7 C8 C9 CX CY CZ D1 D2 D3 D4 D5 D6 D7 D8 D9 IV（mcd） MIN. 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 MAX. 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 560 680 820 1,000 1,200 1,500 1,800 2,200 2,700 3,300 3,900 4,700 5,600 VUB VUG VYBG VYPY VFY VFA IF=10mA IF=20mA VFV VFR B8 C1 C2 C2 C7 C7 C7 C7 C8 CX CX D1 D1 D1 D3 D4 ※Limited width of luminous intensity rank is from Min.4 rank width. 2006.3.31 Page 5 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Color Tone Groups (λd) (Ta=25℃) ( unit: nm ) Tolerance: +/-1nm 450nm VUB Type 470nm 500nm VUG Type 530nm VUB Type (IF=10mA) A B MIN. 460.0 464.0 MAX. 464.0 468.0 C 468.0 472.0 D 472.0 476.0 VUG Type (IF=10mA) A B MIN. 515.0 520.0 MAX. 520.0 525.0 C 525.0 530.0 D 530.0 535.0 VYBG Type (IF=20mA) B C MIN. 555.0 558.0 MAX. 558.0 561.0 D 561.0 564.0 VYPY Type (IF=20mA) A B MIN. 567.0 570.0 MAX. 570.0 573.0 C 573.0 576.0 VFY Type (IF=20mA) C D MIN. 583.0 586.0 MAX. 586.0 589.0 E 589.0 592.0 F 592.0 595.0 VFA Type (IF=20mA) A B MIN. 597.0 600.0 MAX. 600.0 603.0 C 603.0 606.0 D 606.0 609.0 VFV Type (IF=20mA) B C MIN. 613.0 616.0 MAX. 616.0 619.0 D 619.0 622.0 VFR Type (IF=20mA) A B MIN. 620.0 626.0 MAX. 626.0 632.0 C 632.0 638.0 550nm VYBG Type 562nm VYPY Type 572nm VFY Type 590nm 600nm VFA Type 605nm VFV Type 615nm VFR Type 626nm 650nm ※Limited width of color tone rank is from Min.3 to Min.4 rank width. (It changes with product.) 2008.9.12 Page 6 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Characteristics Chart （VUB,VUG) Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition:IF=10mA 1.2 VUB Ta=25℃ X-direction VUG Condition: Ta=25℃ Relative Intensity 1.0 0 30 30 0.8 0.6 60 60 50 0.4 0.2 90 90 0.0 400 450 500 550 600 Wavelength[nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Condition: Ta=25℃ 100 Condition: Ta=25℃ 2.0 Relative Intensity Forward Current I F (mA) 1.5 VUB,VUG 10 VUB,VUG 1.0 0.5 0.0 1 2.5 3.0 3.5 Forward Voltage : VF(V) 2005.11.14 4.0 0 5 10 15 20 Forward Current : IF (mA) Page 7 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Characteristics Chart （VUB,VUG) Ambient Temp. vs. Relative Intensity Derating Ambient Temperature vs. Maximum Forward Current Repeatition Frequency ： f≧ 50Hz Maximum Forward Current : I F MAX. (mA) Condition:IF=10mA 10.0 60 Duty=5% 50 Relative Intensity Duty=10% 40 Duty=20% 30 Duty=50% DC 20 VUB 1.0 VUG 10 0 -40 10 60 110 0.1 - 40 - 20 0 Ambient Temperature : Ta (℃) 20 40 60 80 100 Ambient Temp. : Ta (℃ ) Pulse Width vs. Maximum Tolerable Peak Current Dynamic Drive Rating Duty cycle vs. Maximum Forward Current Ambient Temp. : Ta=25℃ 10 IF Peak MAX./IF DC MAX. Maximum Forward Current : IF MAX.(mA) 100 10 10kHz 1kHz 100Hz 50Hz 1 1 1 10 Duty (%) 2004.06.25 2.4 100 1 10 100 1000 10000 100000 Pulse Width : tw (μs ) Page 8 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Characteristics Chart（VYBG,VYPY) Spectral Distribution Spatial Distribution Example Relative Intensity vs. wavelength Condition:IF=20mA Ta=25℃ 1.2 X-direction VYBG Condition: Ta=25℃ VYPY VYBG Relative Intensity 1.0 VYPY 0 30 30 0.8 0.6 50 60 60 0.4 0.2 90 90 0.0 520 540 560 580 600 620 Wavelength[nm] Forward Voltage vs. Forward Current Condition: Ta=25℃ Condition: Ta=25℃ 1.5 Relative Intensity 100 Forward Current I F (mA) Forward Current vs. Relative Intensity 1.0 10 VYPY VYBG VYPY 0.5 VYPY VYBG 1 0.0 1.8 1.9 2.0 2.1 2.2 2.3 Forward Voltage : VF(V) 2005.11.25 VYBG 2.4 2.5 0 5 10 15 20 25 30 Forward Current : IF (mA) Page 9 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Characteristics Chart（VYBG,VYPY) Derating Ambient Temp. vs. Relative Intensity Ambient Temp. vs. Maximum Forward Current Repetition Frequency：f ≧ 50Hz Condition:IF=20mA 10.0 Duty=5% 100 80 Duty=10% 60 Duty=20% Relative Intensity Maximum Forward Current : I F MAX. (mA) 120 Duty=50% 1.0 VYBG 40 DC VYPY 20 0.1 0 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 Ambient Temp. : Ta (℃ ) Ambient Temp. : Ta (℃ ) 80 100 Pulse Width vs. Maximum Tolerable Peak Current Dynamic Drive Rating Duty cycle vs. Maximum Forward Current 10 3.3 10kHz 1kHz 100Hz 50Hz 1 1 1 10 Duty (%) 2005.9.28 Ambient Temp. : Ta=25℃ 10 IF Peak MAX./IF DC MAX. Maximum Forward Current : IF MAX.(mA) 100 100 1 10 100 1000 10000 100000 Pulse Width : tw (μs ) Page 10 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Characteristics Chart（VFY,VFA,VFV,VFR) Spectral Distribution Spatial Distribution Example Relative Intensity vs. Wavelength Condition:IF=20mA Ta=25℃ X-direction Condition: Ta=25℃ 0 30 Relative Intensity 30 50 60 60 90 90 Wavelength[nm] Forward Voltage vs. Forward Current Forward Current vs. Relative Intensity Condition: Ta=25℃ Condition: Ta=25℃ 1.5 Relative Intensity Forward Current I F (mA) 100 10 1.0 VFY,VFA,VFV,VFR 0.5 VFV, VFR VFY,VFA 0.0 1 1.5 1.6 1.7 1.8 1.9 2.0 2.1 Forward Voltage : VF(V) 2006.10.30 2.2 2.3 2.4 0 5 10 15 20 25 30 Forward Current : IF (mA) Page 11 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Characteristics Chart（VFY,VFA,VFV,VFR) Derating Ambient Temp. vs. Relative Intensity Ambient Temp. vs. Maximum Forward Current Repetition Frequency：f ≧ 50Hz Duty=5% 100 80 Duty=10% 60 Duty=20% Relative Intensity Maximum Forward Current : I F MAX. (mA) Condition:IF=20mA 10.0 120 Duty=50% 40 VFA 1.0 VFV,VFR DC VFY 20 0.1 0 -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 Ambient Temp. : Ta (℃ ) Ambient Temp. : Ta (℃ ) 80 100 Pulse Width vs. Maximum Tolerable Peak Current Dynamic Drive Rating Duty cycle vs. Maximum Forward Current 10 3.3 10kHz 1 1kHz 100Hz 100 1000 50Hz 1 1 10 Duty (%) 2006.3.31 Ambient Temp. : Ta=25℃ 10 IF Peak MAX./IF DC MAX. Maximum Forward Current : IF MAX.(mA) 100 100 1 10 10000 100000 Pulse Width : tw (μs ) Page 12 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Package Dimensions (Unit: mm) Weight: (7.81)mg Recommended Soldering Pattern Surface Mount (Unit: mm) Reverse Mount Taping Specification Part No. : V 1105W -TR Quantity: 2,000pcs/ reel(standard) 2005.9.28 (Unit: mm) (Surface Mount) Part No. : V 1105W -RR (Reverse Mount) Quantity: 2,000pcs/ reel(standard) Page 13 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6℃ maximum) Manual Soldering Conditions Iron tip temp. Soldering time and frequency 2007.8.31 350 ℃ 3 s 1 time (MAX.) (MAX.) (MAX.) Page 14 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Reliability Testing Result Reliability Testing Result Applicable Standard Testing Conditions Duration Failure Room Temp. Operating Life EIAJ ED4701/100(101) Ta = 25℃, IF = Maxium Rated Current 1,000 h 0/20 High Temp. Operating Life EIAJ ED4701/100(101) Ta = Maximum Rated Operating Temperature, IF = Derating Value 1,000 h 0/20 Low Temp. Operating Life EIAJ ED4701/100(101) Ta = -40℃, IF = Maxium Rated Current 1,000 h 0/20 Wet High Temp. Operating Life EIAJ ED4701/100(102) Ta = 60℃, 90%, IF = Maxium Rated Current 1,000 h 0/20 Wet High Temp. Storage Life EIAJ ED4701/100(103) Ta = 60℃, 90% 1,000 h 0/20 Thermal Shock EIAJ ED4701/100(105) Thermal Shock Operating EIAJ ED4701/100(105) High Temp. Storage Life EIAJ ED4701/200(201) Ta = Maximum Rated Storage Temperature 1,000 h 0/20 Low Temp. Storage Life EIAJ ED4701/200(202) Ta = Minimum Rated Storage Temperature 1,000 h 0/20 Cycled Temp. Humidity Life EIAJ ED4701/200(203) Resistance to Reflow Soldering EIAJ ED4701/300(301) Electric Static Discharge EIAJ ED4701/300(304) C = 100pF, R2 = 1.5KΩ, ±2,000V EIAJ ED4701/400(403) 98.1m/s (10G), 100 ～ 2KHz, 20min, XYZ each direction ※1 (ESD) Vibration, Variable Frequency ※1 Reference test Ta = -40℃ ～ Maximum Rated Storage Temperature (each 15min.) Ta = -40℃(off) ～ 85℃ (IF = Derating Value on), (each 15min.) 1,000 cycles 0/20 1,000 cycles 0/20 Ta = -30℃(2h) ～ 80℃, 95%(2h), 8h/cycle, IF = Derating Value, 5min on-off Moisture Soak : 30℃, 70%, 72h Preheat : 150 ～ 180℃(120s Max.) Soldering Temp. : 260℃(5s) 30 cycles 0/20 Twice 0/20 once each polarity 0/10 2 2 h 0/10 Failure Criteria Items Symbols Conditions Failure criteria Luminous Intensity Iv IF Value of each product Luminous Intensity Testing Min. Value ＜ Spec. Min. Value x 0.5 Forward Voltage VF IF Value of each product Forward Voltage Testing Max. Value ≧ Spec. Max. Value x 1.2 Reverse Current IR VR = Maximum Rated Reverse Voltage V Testing Max. Value ≧ Spec. Max. Value x 2.5 Cosmetic Appearance - - Occurrence of notable decoloration, deformation and cracking 2007.8.31 Page 15 1105W Series Single Color Dome Lens Type (High Reliability type, V-Series) Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2007.8.31 Page 16