DB101S THRU DB107S SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIERS Voltage Range - 50 to 1000 Volts DBS Current - 1.0 Ampere FEATURES Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique High temperature soldering guaranteed: 250*/10 seconds / 0.375''(9.5mm) led length at 5 lbs., (2.3kg)tension Small size, simple installation Leads solderable per MIL-STD-202, Method 208 High surge current capability .205(5.2) .195(5.0) + .047(1.20) .040(1.02) .335(8.51) .320(8.13) 45 .130(0.33) .120(0.22) MECHANICAL DATA .404(10.3) .386(9.80) .013(0.33) Case: Molded plastic body Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on case Mounting Position: Any Weight:0.04 ounce, 1.0 grams .255(6.5) .245(6.2) .0088(0.22) .013(0.33) .060(1.53) .003(0.076) .040(1.02) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25* ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load, For capacitive load derate current by 20%. Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current at TA=40* Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage drop per birdge element at 1.0A Maximum DC reverse current TA=25* at rated DC blocking voltage TA=125* Operating temperature range storage temperature range SYMBOLS DB 101S DB 102S DB 103S DB 104S DB 105S DB 106S DB 107S UNITS VRRM VRMS VDC 50 35 50 100 70 100 200 140 200 400 280 400 600 420 600 800 560 800 1000 700 1000 VOLTS VOLTS VOLTS IF(AV) 1.0 Amps IFSM 50 Amps VF 1.1 Volts 10 500 -55 to +150 -55 to +150 µA µA IR TJ TSTG NOTES:DBS for surface mount package. www.shunyegroup.com * * RATINGS AND CHARACTERISTIC CURVES DB101S THRU DB107S PEAK FORWARD CURRENT.(A) AVERAGE FORWARD CURRENT(A) FIG. 1- MAXIMUN DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 1.0 0.6''(1.5mm) 0.8 Copper Pauls .51''x.51'' (13mmx13mm) 0.6 0.4 Single Phase Half Wave 60Hz Resistive or inductive Load 0.2 0 20 40 60 80 100 120 140 150 FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 60 TJ=25* Single sine-wave (JEDEC Method) 50 40 30 20 10 0 2 1 TJ=125* 10 1.0 0.1 TJ=25* .10 0.01 .01 0 20 40 60 80 100 120 140 INSTANTANEOUS REVERSE CURRENT.(A) 100 1 4 6 10 40 60 100 1 0.1 TJ=25* PULSE WIDTH:300*S 1% DUTY CYCLE 0.01 0.4 0.6 0.8 1.0 1.2 FORWARD VOLTAGE,(V) FIG. 3-TYPICAL JUNCTION CAPACITANCE PER BRIDGE ELEMENT 100 10 TJ=25* f=1.0MHZ Visg=50mV p-p 1 20 FIG. 4-TYPICAL FORWARD CHARACTERISTICS PER BRIDGE ELEMNT PERCENT OF RATED PEAK REVERSE VOLTAGE.(%) 1 10 NUMBER OF CYCLES AT 60 Hz FIG. 3-TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT CAPACITANCE.(pF) INSTANTANEOUS REVERSE CURRENT(*A) AMBIENT TEMPERATURE, C 10 REVERSE VOLTAGE.(V) www.shunyegroup.com 100 1.4 1.6