UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES KEY FEATURES DESCRIPTION performance, for each of the series, results from different I-region thickness. The three series have broad applicability in many RF and microwave switch and attenuator circuits. Additionally, the UM7100 in leaded versions is usually the most cost-effective diode choice in high volume usage. Voltage ratings to 1000V (UM7000) Average power dissipation to 10 W Series resistance as low as 0.25 Ω Carrier lifetime greater than 2.5 µs Non cavity design Thermally matched configuration IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com ABSOLUTE MAXIMUM RATINGS AT 25º C (UNLESS OTHERWISE SPECIFIED) Low conductance at 0 V bias PD θ O 25 C Pin Temperature 10 W 15 OC/W 5.5 W 1.5 W 10 W 27.5 OC/W C ½ in. total length to 25 OC Contact Free Air O 25 C Stud Temperature D O 25 C Stud Temperature 7.5 W 20 OC/W 8W UM7000 UM7100 UM7200 17 OC/W 60 kW 35 kW 20 kW Package A B&E Condition SM O 25 C End Cap Temperature All 1 us pulse (Single) Low capacitance at 0 V bias WWW . Microsemi .C OM The UM7000 and UM7100 series offer moderately high power handling in combination with reasonably low levels of both series resistance and capacitance. The UM7200 series offers the lowest series resistance, but the highest capacitance of the group. The differences in specified 15 OC/W Compatible with automatic insertion equipment APPLICATIONS/BENEFITS Isolated stud package available Surface mount package available VOLTAGE RATINGS Reverse Voltage @ 10 uA 100 200 400 600 800 1000 Copyright 2005 Rev. 0, 2005-09-08 UM7101 UM7102 UM7104 UM7108 - UM7201 UM7202 UM7204 - UM7000 SERIES Style “B” UM7001 UM7002 UM7006 UM7010 Style “SM” Microsemi Page 1 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES ELECTRICAL PARAMETERS @ 25°C (unless otherwise specified) Symbol Reverse Current (Max) IR Series Resistance(Max) Capacitance (Max) Parallel Resistance(Min) RS CT RP Conditions UM7000 UM7100 At rated voltage 10 10 10 uA 1.0 0.9 200k 0.6 1.2 150k 0.25 2.2 70k Ohm pF Ohms If = 100 mA, F= 100 MHz VR = 100 V, F = 1 MHZ VR = 100 V, F = 100 MHz UM7200 Units Carrier Lifetime(Min) τ IF = 10 mA 2.5 2.0 1.5 us I-Region Width (Min) W - 150 80 40 um WWW . Microsemi .C OM Parameter UM7000 TYPICAL CAPACITANCE (pF) 3 2 1 MHz 5 MHz 1 10 MHz => 100 MHz ELECTRICALS 0 100 101 102 103 Vr (V) Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 2 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES WWW . Microsemi .C OM UM7100 TYPICAL 3 CAPACITANCE (pF) 1 MHz 5 MHz 2 10 MHz 1 =>100 MHz 0 100 101 102 103 Vr (V) UM7200 TYPICAL 3 1 MHz 100 MHz 2 =>100 MHz 1 ELECTRICALS CAPACITANCE (pF) 10 MHz 0 100 101 102 103 Vr (V) Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 3 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES WWW . Microsemi .C OM UM7000 TYPICAL 103 100 MHz Rp (kOhms) 102 0.5 GHz 1.0 GHz 101 3.0 GHz 100 100 101 102 103 Vr (V) UM7100 TYPICAL 3 10 100 MHz 0.5 GHz Rp (kOhms) 102 1.0 GHz ELECTRICALS 101 3.0 GHz 100 100 101 102 103 Vr (V) Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 4 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES 102 WWW . Microsemi .C OM UM7200 TYPICAL 100 MHz 0.5 GHz 1.0 GHz 100 3.0 GHz Rp (kOhms) 101 10-1 100 101 102 103 Vr (V) Rs versus If TYPICAL 105 104 UM7000 3 UM7100 10 2 UM7200 10 10 ELECTRICALS Rs (Ohms) 10 1 0 -1 10 10-3 10-2 10-1 100 101 102 103 If (mA) Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 5 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES UM7200 UM7100 0 WWW . Microsemi .C OM If versus Vf TYPICAL UM7000 10 10-1 If (mA) -2 10 10-3 10-4 10-5 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Vf (V) POWER RATING STUD MOUNTED DIODES TYPICAL 10 "C" PACKAGE 8 6 ELECTRICALS MAX POWER DISSIPATION (W) 12 "D" PACKAGE 4 2 0 0 25 50 75 100 125 150 175 STUD TEMPERATURE (C) Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 6 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES WWW . Microsemi .C OM 102 THETA = 15 C/W MAX. 101 ---------UM7100 UM7200 100 ELECTRICALS PULSE THERMAL IMPEDANCE (C/W) PULSE THERMAL IMPEDANCE VERSUS WIDTH TYPICAL UM7000 10-1 10-2 10-6 10-5 10-4 10-3 10-2 10-1 100 PULSE WIDTH (SEC) Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 7 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES WWW . Microsemi .C OM STYLE “A” STYLE “B” STYLE “C” STYLE “CR” MECHANICAL Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 8 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES WWW . Microsemi .C OM STYLE “D” STYLE “DR” STYLE “E” STYLE “SM” MECHANICAL Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 9 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES WWW . Microsemi .C OM UM7000/UM7100/UM7200 STYLE “SM” FOOTPRINT MECHANICAL NOTES: 1. These dimensions will match the terminals and provide for additional solder fillets at the outboard ends at least as wide as the terminals themselves, assuming accuracy of placement within 0.005” 2. If the mounting method chosen requires use of an adhesive separate from the solder compound, a round (or square) spot of cement as shown should be centrally located. Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 10 UM7000 / UM7100/UM7200 HIGH POWER PIN DIODES WWW . Microsemi .C OM NOTES: NOTES Copyright 2005 Rev. 0, 2005-09-08 Microsemi Page 11