TOTAL-POWER PPS-125-27

TOTAL POWER INT'L
PPS-125
125W Single Output with PFC Function
series
Features :
Universal AC input / Full range
Built-in active PFC function
Protections:Short circuit/Over load/Over voltage
PWM control and regulated
3
High power density 6.117W/inch
Built-in remote sense function
LED indicator for power on
100% full load burn-in test
125W with 18CFM FAN
5"x3" compact size
3 years warranty
SPECIFICATION
MODEL
OUTPUT
INPUT
PPS-125-3.3
PPS-125-5
PPS-125-12
PPS-125-13.5 PPS-125-15
PPS-125-24
PPS-125-27
PPS-125-48
DC VOLTAGE
3.3V
5V
12V
13.5V
15V
24V
27V
48V
RATED CURRENT
20A
20A
8.5A
7.5A
6.7A
4.2A
3.8A
2.1A
CURRENT RANGE (convection) 0 ~ 20A
CURRENT RANGE (18CFM FAN) 0 ~ 25A
0 ~ 20A
0 ~ 8.5A
0 ~ 7.5A
0 ~ 6.7A
0 ~ 4.2A
0 ~ 3.8A
0 ~ 2.1A
0 ~ 25A
0 ~ 10.5A
0 ~ 9.3A
0 ~ 8.4A
0 ~ 5.2A
0 ~ 4.6A
0 ~ 2.6A
RATED POWER (convection) 66W
100W
102W
101.25W
100.5W
100.8W
102.6W
100.8W
RATED POWER (18CFM FAN) 82.5W
125W
126W
125.55W
126W
124.8W
124.2W
124.8W
RIPPLE & NOISE (max.) Note.2 100mVp-p
VOLTAGE ADJ. RANGE
3.13 ~ 3.46V
VOLTAGE TOLERANCE Note.3 2.0%
100mVp-p
100mVp-p
100mVp-p
100mVp-p
150mVp-p
150mVp-p
250mVp-p
4.75 ~ 5.25V
2.0%
11.40 ~ 12.60V 12.82 ~ 14.17V 14.25 ~ 15.75V 22.80 ~ 25.20V 25.65 ~ 28.35V 45.60 ~ 50.40V
2.0%
2.0%
2.0%
1.0%
1.0%
1.0%
LINE REGULATION
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
0.5%
LOAD REGULATION
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
SETUP, RISE, HOLD TIME
1000ms, 30ms, 20ms/230VAC
VOLTAGE RANGE
90 ~ 264VAC
FREQUENCY RANGE
47~63Hz
POWER FACTOR
PF>0.93/230VAC
EFFICIENCY (Typ.)
70%
79%
1.2A
1.7A
AC CURRENT
115VAC
230VAC
INRUSH CURRENT (max.)
2000ms, 30ms, 20ms/115VAC at full load
127 ~ 370VDC
PF>0.98/115VAC at full load
80%
80%
80%
83%
<2mA / 240VAC
OVER LOAD
130 ~ 160% rated output power
Protection type : Fold back current limiting, recovers automatically after fault condition is removed
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
83%
0.6A
0.75A
COLD START 40A/230VAC
LEAKAGE CURRENT
PROTECTION
83%
3.63 ~ 4.45V 5.5 ~ 6.75V
13.8 ~ 16.2V 15.5 ~ 20.25V 17.25 ~ 20.25V 27.6 ~ 32.4V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
-20 ~ +70 (Refer to output load derating curve)
31.05 ~ 36.45V 57.6 ~ 67.2V
20 ~ 90% RH non-condensing
-40 ~ +85
, 10 ~ 95% RH
0.05%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 Approved
I/P-O/P:3KVAC
I/P-FG:1.5KVAC
O/P-FG:0.5KVAC
SAFETY & ISOLATION RESISTANCE
(Note 4)
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
MTBF
111.7Khrs min. MIL-HDBK-217F (25 )
OTHERS
DIMENSION
EMC
PACKING
NOTE
127*76.2*34.6mm (L*W*H)
0.37Kg; 36pcs/13.3Kg/0.89CUFT
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
PPS-125
125W Single Output with PFC Function
Mechanical Specification
series
Unit:mm
127
115.6
FS1
T2A 250VAC
64.8
76.2
SVR1
LED1
1 CN3
2
1
2
3
4
5
6
7
8
1
2
3
CN1
CN4
4-
3.
5
34.6
Air flow
direction
AC Input Connector (CN1) : JST B3P-VH or equivalent
Pin No.
1
2
3
Assignment
AC/L
No Pin
AC/N
Mating Housing
JST VHR
or equivalent
DC Output Connector (CN4) : JST B8P-VH or equivalent
Pin No.
1~4
5~8
Terminal
JST SVH-21T-P1.1
or equivalent
Assignment
-V
+V
Mating Housing
Terminal
JST VHR
or equivalent
JST SVH-21T-P1.1
or equivalent
(CN3) : Remote Sense
Pin No.
1
2
Derating Curve
Output Derating VS Input Voltage
100
125
Forced air 18CFM
90
100
80
70
70
50
60
LOAD(%)
LOAD (%)
Free air Convection
20
-20
Assignment
RSRS+
0
10
20 25 30
40
AMBIENT TEMPERATURE (
50
)
60
70
50
40
85
100
115
135
155
INPUT VOLTAGE (V) 60Hz
264