TOTAL POWER INT'L SP-300 300W Single Output with PFC Function series Features : Universal AC input / Full range Built-in active PFC function, PF>0.95 Protections:Short circuit/Over load/Over voltage/Over temperature Forced air cooling by built-in DC fan Built-in cooling Fan ON-OFF control Fixed switching frequency at 110KHz 3 years warranty SPECIFICATION MODEL OUTPUT SP-300-5 SP-300-7.5 SP-300-12 SP-300-13.5 SP-300-15 SP-300-24 SP-300-27 DC VOLTAGE 5V 7.5V 12V 13.5V 15V 24V 27V 48V RATED CURRENT 50A 34A 24A 21A 19A 12.5A 11A 6.25A CURRENT RANGE 0 ~ 50A 0 ~ 34A 0 ~ 24A 0 ~ 21A 0 ~ 19A 0 ~ 12.5A 0 ~ 11A 0 ~ 6.5A RATED POWER 250W 255W 288W 285W 285W 300W 297W 300W RIPPLE & NOISE (max.) Note.2 150mVp-p VOLTAGE ADJ. RANGE 4.5 ~ 5.7V VOLTAGE TOLERANCE Note.3 2.0% LINE REGULATION LOAD REGULATION INPUT PROTECTION 150mVp-p 150mVp-p 150mVp-p 150mVp-p 150mVp-p 200mVp-p 240mVp-p 6 ~ 9V 2.0% 10 ~ 13.2V 1.0% 12 ~ 15V 1.0% 13.5 ~ 18V 1.0% 20 ~ 26.4V 1.0% 26 ~ 32V 41 ~ 56V 0.3% 0.3% 0.3% 0.2% 0.2% 0.2% 1.0% 1.0% 0.5% 0.5% 0.5% 0.5% 0.5% 0.5% VOLTAGE RANGE 88 ~ 264VAC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR PF>0.95/230VAC EFFICIENCY(Typ.) 75% 80% AC CURRENT INRUSH CURRENT(max.) 4A/115VAC 18A/115VAC 2A/230VAC 36A/230VAC LEAKAGE CURRENT <2mA / 240VAC OVER LOAD 105 ~ 135% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE 1.0% 0.5% 1500ms, 50ms, 20ms at full load FAN CONTROL O.T.P. 1.0% 0.5% SETUP, RISE, HOLD TIME OVER VOLTAGE SP-300-48 124 ~ 370VDC PF>0.95/115VAC at full load 83% 83% 83% 85% 5.75 ~ 6.75V 9.4 ~ 10.9V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V Protection type : Hiccup mode, recovers automatically after fault condition is removed RTH1 or RTH2 50 FAN ON, 5 FAN OFF, 70 output shutdown -10 ~ +50 (Refer to output load derating curve) 86% 85% 33.7 ~ 39.2V 57.6 ~ 67.2V 20 ~ 90% RH non-condensing -20 ~ +85 , 10 ~ 95% RH 0.03%/ (0 ~ 50 10 ~ 500Hz, 2G 10min./1cycle, Period for 60min. each along X, Y, Z axes UL1950, TUV EN60950 Approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC ISOLATION RESISTANCE SAFETY & Compliance to EN55022 (CISPR22) Class B EMI CONDUCTION & RADIATION EMC (Note 4) OTHERS HARMONIC CURRENT EMS IMMUNITY MTBF DIMENSION PACKING NOTE Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204 Light industry level, criteria A 168.7K hrs min. MIL-HDBK-217F (25 215*115*50mm (L*W*H) 1.18Kg; 12pcs/14.2Kg/0.98CUFT ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. TOTAL POWER INT'L SP-300 300W Single Output with PFC Function Mechanical Specification Case No. 912 series Unit:mm 117.5 27.5 150 32.5 117.5 47.5 36.5 LED +V ADJ. 9 8 5 115 50 95 9.5 135 7 6 4-M4 L=5mm 8 32.5 3 5-M3 L=3mm 2 16 10 1 50.5 4 15 Air flow direction 215 CL 25 Terminal pin number assignment : Pin No. 1 2 3 50 150 32.5 4-M4 L=6mm Pin No. Assignment 4~6 DC OUTPUT -V 7~9 DC OUTPUT +V Assignment AC/L AC/N FG Derating Curve Output Derating VS Input Voltage Ta=25 24~48V 100 100 12~15V 90 80 80 LOAD (%) LOAD (%) 70 5,7.5V 60 40 20 -10 0 10 20 30 40 AMBIENT TEMPERATURE ( 45 ) 50 (HORIZONTAL) 60 50 40 88 115 135 155 INPUT VOLTAGE (VAC) 60Hz 230 264