TRUMPOWER PD65-32

50-65 WATT DC TO DC CONVERTERS
PD65 SERIES
DESCRIPTION
The PD65 series of DC/DC converters provide 50 to 65 watts
of continuous output power. Available in three standard input
range of 10-30 VDC, 20-60 VDC and 30-90 VDC, they are
ideal for a variety of applications including telecoms, process
control,
portable
equipment
and
vehicle
mounted
instrumentation. All units are available in compact “open PCB”
or “enclosed” mechanical formats.
F E ATU R E S
‧
‧
‧
‧
‧
‧
Low cost
Small size, light weight
100﹪ burn-in
Overvoltage protection
Overcurrent protection
Three wide input ranges:
10-30 VDC, 20-60 VDC and 30-90 VDC
I N P U T S P E C I F I C ATI O N S
E N V I R O N M E N TA L S P E C I F I C ATI O N S
Input voltage:
10 to 30 VDC( PD65 “L” series)
20 to 60 VDC( PD65 “M” series)
30 to 90 VDC( PD65 “H” series)
Operating temperature:
St o r a g e t e m p e r a t u r e :
Relative humidity:
Derating:
Input current:
4.1A( rms) for 24 VDC
2.1A( rms) for 48 VDC
1.5A( rms) for 72 VDC
0℃ to +70℃
-40℃ to +85℃
5﹪ to 95﹪ non-condensing
Derate from 100﹪ at +50℃
linearly to 50﹪ at +70℃
OUTPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Output voltage/current:
See rating chart
Switching frequency:
32KHz ±5KHz
Total output power:
65 watts maximum
Efficiency:
70﹪ minimum at full load
Ripple and noise:
1﹪ peak to peak max.
Line regulation:
±0.5﹪ maximum at full load
Overvoltage protection:
set at 112 - 132﹪ of its nominal
output voltage
Withstand voltage:
1000VDC from input to output
MTBF:
Overcurrent protection:
All outputs protected to short
circuit conditions
400,000 hours minimum at full load
at 25℃ ambient, calculated per
MIL-HDBK-217F
Temperature coefficient:
All outputs ±0.04﹪ /℃
maximum
Transient response:
Maximum excursion of 4﹪ or
better on all models, recovering
to 1﹪ of final value within
500us after a 25﹪ step load
change
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA
Phone: 408-988-6616 ● [email protected] ● www.TRUMPower.com
PD65 SERIES
OUTPUT VOLTAGE/CURRENT RATING CHART
Maximum
(1)(2)
Output #1
Output #2
Output #3
Output #4
Output
Model
Vnom. Imin. Imax. Tol.
Vnom. Imin. Imax. Tol.
Vnom. Imin. Imax. Tol.
Vnom. Imin. Imax. Tol.
Power(3)
PD65-10
5V
0A
10A 1%
(N/A)
(N/A)
(N/A)
50W
PD65-12
12V
0A
5.5A 1%
(N/A)
(N/A)
(N/A)
65W
PD65-13
15V
0A
4.5A 1%
(N/A)
(N/A)
(N/A)
65W
PD65-14
24V
0A
3.0A 1%
(N/A)
(N/A)
(N/A)
65W
PD65-23
+5V
1A
6.0A 3%
+12V 0.5A
3A 5%
(N/A)
(N/A)
65W
PD65-24
+5V
1A
6.0A 3%
+15V 0.4A
3A 5%
(N/A)
(N/A)
65W
PD65-25
+5V
1A
6.0A 3%
+24V 0.3A
2A 5%
(N/A)
(N/A)
65W
PD65-30
+5V
1A
6.0A 3%
+12V 0.5A
3A 5%
-5V 0.1A 0.5A 10%
(N/A)
65W
PD65-31
+5V
1A
6.0A 3%
+12V 0.5A
3A 5%
-12V 0.1A 0.5A 10%
(N/A)
65W
PD65-32
+5V
1A
6.0A 3%
+15V 0.4A
3A 5%
-15V 0.1A 0.5A 10%
(N/A)
65W
PD65-33
+5V
1A
6.0A 3%
+15V 0.4A
3A 5%
-12V 0.1A 0.5A 10%
(N/A)
65W
PD65-39
+5V
1A
6.0A 3%
+24V 0.3A
2A 5%
-12V 0.1A 0.5A 10%
(N/A)
65W
PD65-40
+5V
1A
6.0A 3%
+12V 0.5A
3A 5%
-12V 0.1A 0.5A 10%
-5V
0.1A 0.5A 10%
65W
Notes: (1) All multi-output units may be operated at no-load without damage. At no-load, output tolerance increases to 10%
(2) Suffix codes for mechanical format and input range are as follows. PD65-XXYZ; “XX” is the model code from the
above table, “Y” is the input range (L=10-30 VDC, M=20-60 VDC, H=30-90 VDC) and “Z” is the mechanical format
(A=open PCB, B=L-bracket, C=enclosed), e.g. PD65-31 MC (20-60 VDC input range, enclosed).
(3) The models for 10-30 VDC input range are suitable only for 70% of the above stated maximum output power.
MECHANICAL SPECIFICATIONS
NOTES:
1. Dimensions shown in inch [mm]
2. Tolerance 0.02 [0.5] maximum
3. Input connector mates with Molex housing
09-50-3031 and Molex 2878 series crimp
terminal.
4. Output connector mates with Molex housing
09-50-3081 and Molex 2878 series crimp
terminal.
5. Weight: 380 grams (PCB format)
6. See the mechanical details of L-bracket and
enclosed formats in page 7-2.
PIN CHART
PIN
1
2
3
4
5
6
7
8
OUTPUT
#1
OUTPUT
#1
OUTPUT
#1
OUTPUT
#1
OUTPUT OUTPUT
#1
#1
COMMON COMMON
RETURN RETURN
RETURN
RETURN
RETURN
RETURN
OUTPUT
#2
OUTPUT
#2
N.C.
N.C.
OUTPUT
#1
OUTPUT
#1
COMMON COMMON
RETURN RETURN
OUTPUT
#2
OUTPUT
#2
OUTPUT
#3
N.C.
OUTPUT
#1
OUTPUT
#1
COMMON COMMON
RETURN RETURN
OUTPUT
#2
OUTPUT
#2
OUTPUT
#3
OUTPUT
#4
MODEL
PD65-10
PD65-13
PD65-23
PD65-25
PD65-30
PD65-32
PD65-39
PD65-40
PD65-12
PD65-14
PD65-24
PD65-31
PD65-33
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA
Phone: 408-988-6616 ● [email protected] ● www.TRUMPower.com