TRUMPOWER TM201

TRUMPower
150- 200 WATT MEDICAL POWER SUPPLIES
D E SCR IPTION
TM201 SERIES
The TM201 series comprising single and multiple
output models for 150 to 200 watts of continuous
output power is specially designed for dental and
medical applications. They operate at 90 to
264VAC input voltage without the need of a
selector strap. All auxiliary outputs are with
magnetic amplifier linear regulator to keep
regulation. The units are constructed on a printed
circuit board with a U-bracket for mechanical
support and heat sinking. A cover-and-fan
assembly can be added during manufacturing.
( LV D )
RoHS
F EATU R E S
‧
‧
‧
‧
‧
‧
‧
‧
‧
Low safety ground leakage current
M e e t E N 5 5 0 11 a n d F C C C l a s s B
Pow er Factor 0.98 typical
Short-circuit protection
Pow er Fail Detect( PFD) signal
100% burn-in at full rated load
Optional cover-and-fan assembly
Remote inhibit - TTL high disables output
C o m p l i a n t w i t h R o H S r e q u i r e m e n ts
Saf et y Sta n da rd A ppr o va ls:
UL 60601-1
CSA C22.2 No. 601.1
TÜV EN60601-1
ENVIRONMENTAL SPECIFICATIONS
IN PUT S PE C IF ICAT ION S
I n p u t v o l ta g e :
Input frequency:
Input current:
9 0 t o 2 6 4 VA C
47 to 63Hz
3 . 2 A ( r m s ) f o r 11 5 VA C
1 . 6 A ( r m s ) f o r 2 3 0 VA C
E a r t h l e a k a g e c u r r e n t : 9 0 µ A m a x . @ 11 5 VA C , 6 0 H z
1 5 0 µ A m a x . @ 2 3 0 VA C , 5 0 H z
Operating temperature:
Storage temperature:
Relative humidity:
Derating:
Cooling:
0ºC to +70ºC
-40ºC to +85ºC
5% to 95% non-condensing
Derate from 100% at +50ºC
linearly to 50% at +70ºC
10.8 CFM forced air provided on “C”
version; 25 CFM forced air to be
provided for U-bracket version by
user.
OUTPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Output voltage/current:
See rating chart
Total output power:
Ripple and noise:
Overvoltage protection:
200 watts maximum
2% peak to peak maximum
Provided on output #1 only;
set at 112-132% of its nominal
output voltage
All outputs protected to short
circuit conditions
All outputs ±0.04/ºC maximum
Maximum excursion of 4% or
better on all models,
recovering to 1% of final
value within 500µs after a
25% step load change
TTL logic high for normal
operation and TTL logic low
upon loss of input power. This
signal appears at least 1ms
prior to +5V output dropping
5% below its nominal value.
This signal also provides a
minimum delay of 100ms after
+5V is within regulation.
Switching frequency:
Efficiency:
Hold-up time:
Line regulation:
Inrush current:
Overcurrent protection:
Temperature coefficient:
Transient response:
PFD signal:
88 KHz –112 KHz
70% minimum on all models
20 msec minimum at 110VAC
±0.5% maximum at full load
20 amps @ 115VAC or 40 amps
@ 230VAC, at 25ºC cold start
Withstand voltage:
4000VAC from input to output
1500VAC from input to ground
500VAC from output to ground
MTBF:
350,000 hours at full load at
25ºC ambient, calculated per
MIL-HDBK-217F
EMC Performance (EN60601-1-2: 2001)
E N 5 5 0 11 :
Class B conducted, Class B
radiated
EN61000-3-2:
Harmonic distortion, Class A and D
EN61000-3-3:
Line flicker
EN61000-4-2:
ESD, ±8KV air and ±6KV contact
EN61000-4-3:
Radiated immunity, 3V/m
EN61000-4-4:
Fast transient/burst, ±2KV
EN61000-4-5:
Surge, ±1KV diff, ±2KV com.
EN61000-4-6:
Conducted immunity, 3Vrms
EN61000-4-8:
Magnetic field immunity, 3A/m
E N 6 1 0 0 0 - 4 - 11 :
Voltage dips, 30% reduction for
500ms, 60% reduction for 100ms
and >95% reduction for 10ms
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA
Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com
MEDICAL GRADE
TM201 SERIES
OUTPUT VOLTAGE/CURRENT RATING CHART
Output #1
Output #2
Output #3
Maximum
Output
Output #4
Product No. Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol. Vnom. Imin. Imax. Tol.
Power
TM201-S5.1
5.1V 3.0A
35A 2%
(N/A)
(N/A)
(N/A)
175W
TM201-S3.3
3.3V 3.0A
46A 3%
(N/A)
(N/A)
(N/A)
150W
TM201-S12
12V 1.2A 16.7A 2%
(N/A)
(N/A)
(N/A)
200W
TM201-S15
15V 1.0A 13.4A 2%
(N/A)
(N/A)
(N/A)
200W
TM201-S24
24V 0.6A
8.4A 2%
(N/A)
(N/A)
(N/A)
200W
TM201-S30
30V 0.5A
6.7A 2%
(N/A)
(N/A)
(N/A)
200W
TM201-S48
48V 0.5A
4.2A 2%
(N/A)
(N/A)
(N/A)
200W
TM201-D23
+5.1V 3.0A
30A 2%
+12V
0A
8A
4%
(N/A)
(N/A)
200W
TM201-D24
+5.1V 3.0A
30A 2%
+15V
0A
6A
4%
(N/A)
(N/A)
200W
TM201-D25
+5.1V 3.0A
30A 2%
+24V
0A
4A
4%
(N/A)
(N/A)
200W
TM201-D27
+12V 1.0A
8.7A 2%
+24V
0A
4A
4%
(N/A)
(N/A)
200W
TM201-T30
+5.1V 3.0A
30A 2%
+12V
0A
8A
4%
-5V
0A
6A
4%
(N/A)
200W
TM201-T31
+5.1V 3.0A
30A 2%
+12V
0A
8A
4%
-12V
0A
4A
4%
(N/A)
200W
TM201-T32
+5.1V 3.0A
30A 2%
+15V
0A
6A
4%
-15V
0A
4A
4%
(N/A)
200W
TM201-T33
+5.1V 3.0A
30A 2%
+15V
0A
6A
4%
-12V
0A
4A
4%
(N/A)
200W
TM201-T36
+5.1V 3.0A
30A 2%
+12V
0A
8A
4%
24V
0A
4A
4%
(N/A)
200W
TM201-Q40
+5.1V 3.0A
30A 2%
+12V
0A
8A
4%
-12V
0A
4A
4%
5V
0A
6A
4%
200W
TM201-Q41
+5.1V 3.0A
30A 2%
+15V
0A
6A
4%
-15V
0A
4A
4%
24V
0A
4A
4%
200W
TM201-Q42
+5.1V 3.0A
30A 2%
+12V
0A
8A
4%
-12V
0A
4A
4%
12V
0A
4A
4%
200W
TM201-Q44
+5.1V 3.0A
30A 2%
+12V
0A
8A
4%
-15V
0A
4A
4%
15V
0A
4A
4%
200W
TM201-Q45
+5.1V 3.0A
30A 2%
+12V
0A
8A
4%
-12V
0A
4A
4%
0A
4A
4%
200W
TM201-Q403 +3.3V 3.0A
30A 3%
+5.1V
0A
8A
4%
-12V
0A
4A
4%
24V
12V
0A
4A
4%
175W
NOTES: 1.
2.
3.
4.
5.
6.
Add suffix “C” for enclosed format with option fan control, e.g. TM201-Q45C.
Peak current is 12A on +12V, 9A on +15V and 6A on +24V.
Output #4 is floating. It can be connected externally for positive or negative output.
200 watts for “C” version with a cover-and-fan assembly. 100 watts for U-bracket
version without moving air (maximum current of output #1 & #2 derated to 50%), or
200 watts with 25 CFM forced air provided by user.
When the remote Sense facility is not used, +Sense must be connected to +V,
and –Sense to return, on P2 connector.
All models may be operated at no-load. At no-load, output voltage tolerance
increases to 10%.
MECHANICAL SPECIFICATIONS
Single Output Models
NOTES:
1.
Dimensions shown in inch [mm]
2.
Tolerance 0.02 [0.5] maximum
3.
Input connector P1 is Dinkle DT-35-B01W-03 output
connector P2 is Dinkle DT-35-B01W-09 screws are
M3, Nickel plated.
4.
Connector P3 mates with Molex housing 22-01-1043
and Molex 40445 series crimp terminal.
5.
Connectors P4, P5 mates with Molex housing
22-01-1023 and Molex 40445 series crimp terminal.
6.
P4 is for DC fan rated 12V/0.2A, Pin1 +V and Pin2
COM.
7.
Weight:
0.82 kgs. (1.83 lbs.) approx. for U-bracket version,
0.96 kgs. (2.14 lbs.) approx. for “C” version
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA
Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com
MEDICAL GRADE
TM201 SERIES
Multiple Output Models
NOTES:
1. Dimensions shown in inch [mm]
2. Tolerance 0.02 [0.5] maximum
3. Input connector P1 is Dinkle DT-35-B01W-03 output
connector P2 is Dinkle DT-35-B01W-09 screws are M3,
Nickel plated.
4. Connector P3 mates with Molex housing 22-01-1043
and Molex 40445 series crimp terminal.
5. Connectors P4, P5 mates with Molex housing
22-01-1023 and Molex 40445 series crimp terminal.
6. P4 is for DC fan rated 24V/0.2A (models
TM201-D25/D27) or 5V/0.38A (models TM201-Q403),
and 12V/0.2A (other models, Pin1 +V and Pin2 COM).
7. Weight:
0.82 kgs. (1.83 lbs.) approx. for U-bracket version,
0.96 kgs. (2.14 lbs.) approx. for “C” version
PIN CHART
CONN
PIN
P2
P3
1
2
3
4
5
TM201-S5.1 TM201-S3.3
TM201-S12 TM201-S15
TM201-S24 TM201-S30
TM201-S48
-SENSE
RET.
RET.
RET.
RET.
TM201-D23
TM201-D25
TM201-D24
TM201-D27
OUTPUT OUTPUT COM. COM. COM. OUTPUT
#1
#1
RET. RET. RET.
#2
TM201-T30
TM201-T32
TM201-T36
TM201-T31
TM201-T33
OUTPUT OUTPUT COM. COM. COM. OUTPUT OUTPUT
#1
#1
RET. RET. RET.
#2
#3
Product No.
TM201-Q40
TM201-Q41
TM201-Q44
6
7
8
9
1
2
P5
3
4
1
2
OUTPUT OUTPUT OUTPUT
COM. COM.
+SENSE FAN
PFD INHIBIT+ INHIBIT#1
#1
#1
RET. RET.
OUTPUT OUTPUT COM. COM. COM. OUTPUT
#1
#1
RET. RET. RET.
#2
N.C.
N.C.
N.C.
N.C.
FAN
COM. COM.
PFD INHIBIT+ INHIBITRET. RET.
N.C.
N.C.
FAN
COM. COM.
PFD INHIBIT+ INHIBITRET. RET.
OUTPUT
OUTPUT
COM. COM.
#3
FAN
PFD INHIBIT+ INHIBIT#3
RET. RET.
RETURN
TM201-Q403
OUTPUT
OUTPUT OUTPUT COM. COM. COM. OUTPUT OUTPUT
OUTPUT
COM. COM.
#4
FAN
PFD INHIBIT+ INHIBITTM201-Q42
#1
#1
RET. RET. RET.
#2
#3
#4
RET. RET.
RETURN
TM201-Q45
Tumbler Technologies + TRUMPower
3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA
Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com