TRUMPower 30-60 WATT MEDICAL POWER ADAPTERS TMP60 SERIES DESCRIPTION (LVD) The PMP60 is a series of AC/DC switching power adapters consists of 30 to 60 watts single, dual and triple outputs. They are enclosed in a 94V-1 rated polyphenylene-oxide case with an IEC 320/C14 inlet to mate with interchangeable cord for world-wide use. All models meet CISPR 11 and FCC class B emission limits, and are designed for medical applications where low earth leakage current is required. RoHS F E AT U R E S ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ ‧ Desktop form factor Single, dual, or triple outputs Optional output connectors 100% burn-in W i d e i n p u t r a n g e 8 5 t o 2 6 4 VA C Input surge current protection Overvoltage protection Overcurrent protection C o m p l i a n t w i t h C E C a n d E n e r g y St a r E f f i c i e n c y level IV requirements * No load power consumption less than 0.5W * Av e r a g e a c t i v e e f f i c i e n c y ≧ 8 5 % ‧ Compliant with RoHS requirement S a f e t y Sta n d a r d A p p r o va l s : UL 60601-1 CSA C22.2 No. 601.1 I N P U T S P E C I F I C AT I O N S Input voltage： Input frequency： Input current： Leakage current： 8 5 t o 2 6 4 VA C 47 to 63 Hz 1 . 3 0 A ( r m s ) f o r 11 5 VA C 0 . 7 0 A ( r m s ) f o r 2 3 0 VA C 9 0 u A m a x . @ 11 5 VA C , 6 0 H z 1 5 0 u A m a x . @ 2 3 0 VA C , 5 0 H z TÜV EN60601-1 GENERAL SPECIFICATIONS OUTPUT SPECIFICATIONS Switching frequency： 40KHz - 130KHz Output voltage/current： See rating chart Efficiency： Total output power： See rating chart Ripple and noise： 2﹪ peak to peak maximum Hold-up time： Line regulation： Overvoltage protection： Provided on output #1 only; set at 112-140﹪ of its nominal output voltage Overcurrent protection： All outputs protected to short circuit conditions Temperature coefficient： All outputs ±0.04﹪ /℃ maximum Transient response： Maximum excursion of 4﹪ or better on all models, recovering to 1﹪ of final value within 500us after a 25﹪ step load change 85﹪ minimum on single output models, 65﹪ minimum on the others 10 msec minimum at 110VAC ±0.5﹪ maximum at full load Inrush current： 50 amps @ 115VAC, or 100 amps @230VAC, at 25℃ cold start Withstand voltage： 4000VAC from input to output 1500VAC from input to ground 500VAC from output to ground MTBF： 150,000 hours minimum at full load at 25℃ ambient , calculated per MIL-HDBK-217F EMC performance (EN60601-1-2) E N 5 5 0 11 : Class B conducted, Class B radiated FCC: Class B conducted, Class B radiated VCCI: Class B conducted, Class B radiated EN61000-3-2: Harmonic distortion , Class A EN61000-3-3: Line flicker EN61000-4-2: ESD,± 8KV air and ± 6KV contact EN61000-4-3: Radiated immunity, 3V/m for 80~2500MHz EN61000-4-4: Fast transient/burst, ± 2KV EN61000-4-5: Surge, ± 1KV diff., ± 2KV com. E N V I R O N M E N TA L S P E C I F I C AT I O N S EN61000-4-6: Conducted immunity, 3Vrms Operating temperature： 0℃ to +60℃ St o r a g e t e m p e r a t u r e ： -40℃ to+85℃ 5﹪ to 95﹪ non-condensing Relative humidity： Derate from 100﹪ at +40℃ Derating： linearly to 50﹪at +60℃ EN61000-4-8: Magnetic field immunity, 3A/m E N 6 1 0 0 0 - 4 - 11 : Voltage dips, 30﹪ reduction for 500ms, 60% reduction for 100ms and >95﹪ reduction for 10ms Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com TMP60 Series Medical Grade OUTPUT VOLTAGE/CURRENT RATING CHART *Product No. TMP60-Sxx TMP60-Sxx TMP60-Sxx TMP60-Sxx TMP60-Sxx TMP60-Sxx TMP60-Sxx TMP60-D23 TMP60-T30 TMP60-T31 TMP60-T32 TMP60-T36 Notes: Vnom. 11-13V 13-17V 17-21V 21-27V 27-33V 33-39V 46-50V +5V +3.3V +5V +5V +5V Output #1 Imin. Imax. 0A 5.46A 0A 4.62A 0A 3.53A 0A 2.86A 0A 2.23A 0A 1.82A 0A 1.31A 1A 5.0A 1A 6.0A 1A 5.0A 1A 5.0A 1A 5.0A Tol. 5% 5% 5% 5% 3% 3% 3% 5% 5% 5% 5% 5% Vnom. +12V +5V +12V +15V +24V Output #2 Imin. Imax. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) 0.5A 3.0A 0.5A 3.0A 0.5A 3.0A 0.4A 2.3A 0.3A 1.5A Tol. Vnom. 5% 5% 5% 5% 5% +12V -12V -15V +12V Output #3 Imin. Imax. (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) (N/A) 0.1A 0.7A 0.1A 0.7A 0.1A 0.7A 0.1A 0.7A Tol. 10% 10% 10% 10% Maximum Output Power 60W 60W 60W 60W 60W 60W 60W 40W 30W 40W 40W 40W (1) For single output models: Specify the output voltage xx when ordering, e.g. TMP60-S12 for 12V output, TMP60-S19.5 for 19.5V output. (2) Ripple and noise: Peak-to-peak with 20MHz bandwidth and 10uF tantalum capacitor in parallel with a 0.1uF ceramic capacitor at rated line voltage and load ranges (3) The output voltages of a multiple output model may go outside of the stated tolerance when an output load current is out of stated limits. All models may be operated at no-load without damage. MECHANICAL SPECIFICATIONS NOTES: 1. Dimensions show in inch [mm] 2. Tolerance 0.02 [0.5] maximum 3. Weight: 600 grams approx. 4. For other output connector options, please contact TRUMPower. 5. To order a model with on/off switch, add suffix ”S” to the model number, e.g. TMP60-S30-S. PIN CHART 1 2 3 4 5 TMP60-Sxx RETURN RETURN OUTPUT #1 RETURN OUTPUT #1 TMP60-D23 COMMOM RETURN COMMOM RETURN OUTPUT #1 N.C. OUTPUT #2 COMMOM RETURN COMMOM RETURN OUTPUT #1 OUTPUT #3 OUTPUT #2 P/N PIN TMP60-T30 TMP60-T36 TMP60-T31 TMP60-T33 Tumbler Technologies + TRUMPower 3350 Scott Blvd., Bldg. 13, Santa Clara, California 95054, USA Phone: 408-988-6616 ● Fax: 408-988-6622 ● email: [email protected] ● Website: www.TRUMPower.com