WURTH 744821110

Spezifikation für Freigabe / specification for release
Kunde / customer :
Artikelnummer / part number :
Bezeichnung :
description :
744821110
LF
RoHS compliant
STROMKOMP. DROSSEL WE-CMB
COMMON MODE CHOKE WE-CMB
DATUM / DATE : 2004-10-11
A Mechanische Abmessungen / dimensions:
XS
B
A
A
B
C
D
E
F
G
D
E
G
1
2
4
3
C
F
B Elektrische Eigenschaften / electrical properties:
Eigenschaften /
Testbedingungen / test
properties
conditions
Leerlauf-Induktivität /
1 kHz / 50µA
inductance
DC-Widerstand /
@ 25°C
DC-resistance
Nennstrom /
nominal current
Nennspannung/
nominal voltage
mm
mm
mm
mm
mm
mm
mm
C Lötpad / soldering spec.:
Wert / value
Einheit / unit
tol.
LO
10,0
mH
±30%
RDC
350,0
mΩ
max.
IDC
0,7
A
max.
UN
250
VAC
typ.
D Prüfgeräte / test equipment:
15 max.
7,5 max.
10,0 ± 0,5
4,5 ± 0,5
18 max.
2,5 ± 0,5
0,7 ref.
1
4
N1
N2
2
3
E Testbedingungen / test conditions:
FLUKE PM 6306 für/for L0/LN
Luftfeuchtigkeit / humidity:
HP 34401 A für/for IN und/and RDC
Umgebungstemperatur / temperature:
+25°C
Prüfspannung / testing voltage
1500 V, 50 Hz
33%
5mA, 2 sec.
F Werkstoffe & Zulassungen / material & approvals G Eigenschaften / general specifications:
Sockel / base:
UL94V-0
Klimabeständigkeit/ climatic class:
Draht / wire:
2UEWF (155°C)
Betriebstemp. / operating temperature:
Kleber / glue:
UL94V-2
Übertemperatur / temperature rise:
Abstandhalter / spacer:
UL94V-0
40/125/21
-40°C - + 125°C
< 55 K
It is recommended that the temperature of the part does
not exceed 125°C under worst case operating conditions.
Freigabe erteilt / general release:
...........................................................................
Datum / date
Kunde / customer
.........................................................................
Unterschrift / signature
Würth Elektronik
MST
...........................................................................
Geprüft / checked
Kontrolliert / approved
Version 1
Name
Änderung / modification
04-10-11
Datum / date
This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the
field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public
information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic
component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for
the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage.
Würth Elektronik eiSos GmbH & Co. KG
D-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
http://www.we-online.com
SEITE 1 VON 1