Spezifikation für Freigabe / specification for release Kunde / customer : Artikelnummer / part number : Bezeichnung : description : LF 744841414 RoHS compliant STROMKOMP. DROSSEL WE-CMB "NiZn" COMMON MODE CHOKE WE-CMB "NiZn" DATUM / DATE : 2005-12-27 A Mechanische Abmessungen / dimensions: XS B A A B C D E F G D E G 1 2 4 3 C F B Elektrische Eigenschaften / electrical properties: Eigenschaften / properties Leerlauf-Induktivität / inductance DC-Widerstand / DC-resistance Nennstrom / nominal current Nennspannung/ nominal voltage Testbedingungen / test conditions C Lötpad / soldering spec.: Wert / value Einheit / unit tol. 10 kHz / 5mA LO 14,0 µH ±30% @ 25°C RDC 15,0 mΩ max. IDC 4,0 A max. UN 250 VAC typ. D Prüfgeräte / test equipment: mm mm mm mm mm mm mm 16,0 max. 7,5 max. 10,0 ± 0,5 4,5 ± 0,5 17,5 max. 2,5 ± 0,5 0,7 ref. 1 4 N1 N2 2 3 E Testbedingungen / test conditions: FLUKE PM 6306 für/for L0/LN Luftfeuchtigkeit / humidity: 33% HP 34401 A für/for IN und/and RDC Umgebungstemperatur / temperature: +25°C Prüfspannung / testing voltage 1500 V, 50 Hz 5mA, 2 sec. F Werkstoffe & Zulassungen / material & approvals G Eigenschaften / general specifications: Sockel / base: UL94V-0 Klimabeständigkeit/ climatic class: Draht / wire: Class F Betriebstemp. / operating temperature: Kleber / glue: UL94V-2 Übertemperatur / temperature rise: Abstandhalter / spacer: UL94V-0 40/125/21 -40°C - + 125°C < 55 K It is recommended that the temperature of the part does not exceed 125°C under worst case operating conditions. Freigabe erteilt / general release: .................................................................................. Datum / date Kunde / customer .................................................................................. Unterschrift / signature Würth Elektronik MST .................................................................................. Geprüft / checked Kontrolliert / approved Name Version 1 Änderung / modification 05-12-27 Datum / date This electronic component is designed and developed with the intention for use in general electronics equipments. Before incorporating the components into any equipments in the field such as aerospace, aviation, nuclear control, submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body. In addition, even electronic component in general electronic equipments, when used in electrical circuits that require high safety, reliability functions or performance, the sufficient reliability evaluation-check for the safety must be performed before use. It is essential to give consideration when to install a protective circuit at the design stage. D-74638 Waldenburg · Max-Eyth-Strasse 1 -3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400 http://www.we-online.com SEITE 1 VON 1