Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] This specification covers the characteristics and specifications of SAW filters for parts ACTF139/139.0/1F11, ACTF147/147.0/F11, ACTF155/155.0F11, ACTF163/163.0/F11, ACTF171/ 171.0/F11 and ACTF280/280.0/F11 which are designed for use in pager applications. 1.Package Dimension (F-11) Pin Configuration 1 Terminal 1 4 Terminal 2 2/3 Case Ground Dimensions Data (unit: mm) A 11.0±0.3 B 4.5±0.3 C 3.1±0.1 D 0.45±0.2 E 6.0±0.5 F 2.54±0.2 2.Test Circuits In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 1 OF 4 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 3.Performance 3-1.Maximum Ratings Rating Value DC Voltage VDC +15 V Max. AC Voltage VPP 10V50Hz/60Hz Operation temperature -4 °C to +85 °C Storage temperature -45 °C to +85 °C RF Power Dissipation 0 dBm 3-2.Electrical characteristics Operating temperature Range: -10 °C to +50 °C Part number Nominal centre frequency F139 F147 F155 F163 F171 Unit 139.0 147.0 155.0 163.0 171.0 MHz Insertion Loss fC -100.0MHz to fC -46.8MHz 50 min. 50 min. 50 min. 50 min. 50 min. dB fC - 46.8MHz to fC -38.8MHz 50 min. 50 min. 50 min. 50 min. 50 min. dB f C±4.0MHz 6.5 max. 6.5 max. 6.5 max. 6.5 max. 6.5 max. dB fC + 38.8MHz to 2.5×f C 42 min. 42 min. 42 min. 42 min. 42 min. dB 210//-13.3 210//-12.1 210//-12.3 210//-11.0 210//-10.9 Ω//pF Input/Output Impedance Part number F280 Unit 281.0 MHz Insertion Loss 277.9MHz …. 284.1MHz 4.5 max. dB Amplitude ripple 277.9MHz …. 284.1MHz 1.5 max. dB Attenuation fC -100.0MHz …. f C -39.5MHz 48 max. dB -39.5MHz …. fC -100.0MHz 40 max. dB 150 Ω Centre Frequency fC Input/Output Impedance In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 2 OF 4 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 4.Typical Frequency Response In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 3 OF 4 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. 6. The frequency fC is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 4 OF 4 Issue : 1 C1 Date : SEPT 04