Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] The ACTF9007/903.650/DCC6 is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter in a surface-mount ceramic DCC6 case. It is designed as an RF filter for cordless telephone CT ISM. Centre frequency is 903.650 MHz. 1.Package Dimension (DCC6) Pin Configuration 2 Input 5 Output 1,3,4,6 Ground Sign Data (unit: mm) Sign Data (unit: mm) A 1.9 E 1.2 B 0.64 F 3.8 C 1.0 G 3.8 D 1.27 3.Test Circuit In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 1 OF 3 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 4.Typical Frequency Response 5. Performance 5-1.Maximum Ratings Rating Value Units CW RF Power Dissipation 0 dBm DC Voltage Between Any Two Pins 5 V Operating Temperature -10 to +50 °C Case Temperature -40 to +85 °C +235 °C Soldering Temperature In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 2 OF 3 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 5-2.Electronic Characteristics Reference temperature: TA =25 °C Characteristic Min. Typ. Max. Units -- 903.650 -- MHz -- 4.0 5.5 dB -- ±2.0 -- MHz -- 1.0 2.0 dB Absolute attenuation within 803.65 MHz …. 878.65 MHz within 923.65 MHz …. 958.65 MHz within 958.65 MHz …. 1003.65 MHz 32 25 35 40 35 45 ---- dB dB dB Input / Output Impedance (Nominal) -- 50 -- Ω Centre frequency fC Insertion Loss within fC±2.0MHz IL Pass band BW Amplitude ripple (p-p) within fC±2.0MHz iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 3 OF 3 Issue : 1 C1 Date : SEPT 04