Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] The ACTF377/280.0/QCC8C is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter in a surface-mount ceramic QCC8C case for wireless LAN applications. 1.Package Dimension (QCC8C) 2. Pins Configuration 6 Input 2 Output 1,3,5,7 To be Grounded 4,8 Case Ground Sign Data (unit: mm) Sign Data (unit: mm) A 2.08 E 1.20 B 0.60 F 1.35 C 1.27 G 5.00 D 2.54 H 5.00 3. Matching Network (50 Ωunbalanced) In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 1 OF 3 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 4.Typical Frequency Response 5.Performance 5-1. Maximum Ratings Rating Value Units Source Power PS 10 dBm DC Voltage VDC 0 V -40 to +85 °C +235 °C Storage Temperature Soldering Temperature In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 2 OF 3 Issue : 1 C1 Date : SEPT 04 Tel : +44 118 979 1238 Fax : +44 118 979 1283 Email: [email protected] 5-2. Electronic Characteristics Operating temperature: Terminating source impedance: Terminating load impedance: TA = -10 … +60 °C ZS = 50 Ω unbalanced and matching network ZL = 50 Ω unbalanced and matching network Characteristics Centre frequency fC Minimum insertion attenuation (including matching network) αmin 3dB Bandwidth BW3dB Amplitude ripple (p-p) fC±7MHz Δ α Group delay ripple (p-p) fC±7MHz Δτ Relative attenuation (relative to αmin) 230 MHz ~ 260 MHz 300 MHz ~ 330 MHz αrel Temperature coefficient of frequency TCf Minimum Typical Maximum Units -- 280.000 -- MHz -- 11.0 13.5 dB 16 20 -- MHz -- ±0.5 -- dB -- 40 100 ns 35 28 46 37 --- dB dB -- -87 -- ppm/K iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling! 1. 2. 3. 4. 5. 6. The frequency f C is defined as the midpoint between the 3dB frequencies. Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture that is connected to a 50 Ω test system with VSWR ≤1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter centre frequency, f C. Note that insertion loss, bandwidth, and passband shape are dependent on the impedance matching component values and quality. Unless noted otherwise, specifications apply over the entire specified operating temperature range. The specifications of this device are based on the test circuit shown above and subject to change or obsolescence without notice. All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications, processes and circuits implemented within components or assemblies. In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice. ISO9001: 2000 Registered - Registration number 6830/2 For quotations or further information please contact us at: 3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK http://www.actcrystals.com 3 OF 3 Issue : 1 C1 Date : SEPT 04