1
2
TO-220
D2PAK
1 - Cathode
2 - Anode
Back of Case - Cathode
1
1
2
2
APT15D30K
300V
APT15D30SA 300V
15A
15A
ULTRAFAST SOFT RECOVERY RECTIFIER DIODE
PRODUCT APPLICATIONS
PRODUCT FEATURES
PRODUCT BENEFITS
• Anti-Parallel Diode
• Ultrafast Recovery Times
• Low Losses
• Soft Recovery Characteristics
• Low Noise Switching
• Popular TO-220 Package
• Cooler Operation
• Low Forward Voltage
• Higher Reliability Systems
• High Blocking Voltage
• Increased System Power
•
•
•
•
•
-Switchmode Power Supply
-Inverters
Free Wheeling Diode
-Motor Controllers
-Converters
Snubber Diode
Uninterruptible Power Supply (UPS)
Induction Heating
High Speed Rectifiers
• Low Leakage Current
MAXIMUM RATINGS
Symbol
VR
Density
All Ratings: TC = 25°C unless otherwise specified.
Characteristic / Test Conditions
APT15D30K_SA
UNIT
300
Volts
Maximum D.C. Reverse Voltage
VRRM
Maximum Peak Repetitive Reverse Voltage
VRWM
Maximum Working Peak Reverse Voltage
IF(AV)
Maximum Average Forward Current (TC = 117°C, Duty Cycle = 0.5)
15
RMS Forward Current (Square wave, 50% duty)
34
Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms)
110
IF(RMS)
IFSM
TJ,TSTG
TL
Amps
-55 to 150
Operating and StorageTemperature Range
°C
300
Lead Temperature for 10 Sec.
STATIC ELECTRICAL CHARACTERISTICS
Forward Voltage
IRM
Maximum Reverse Leakage Current
CT
Junction Capacitance, VR = 200V
TYP
MAX
IF = 15A
1.2
1.4
IF = 30A
1.5
IF = 15A, TJ = 125°C
1.0
Volts
VR = VR Rated
150
VR = VR Rated, TJ = 125°C
500
APT Website - http://www.advancedpower.com
38
UNIT
µA
5-2004
VF
MIN
pF
053-3010 Rev C
Symbol
DYNAMIC CHARACTERISTICS
APT15D30K_SA
Characteristic
Symbol
Test Conditions
MIN
TYP
MAX
UNIT
trr
Reverse Recovery Time I = 1A, di /dt = -100A/µs, V = 30V, T = 25°C
F
F
R
J
-
16
trr
Reverse Recovery Time
-
32
Qrr
Reverse Recovery Charge
-
46
-
3
-
80
ns
-
230
nC
-
6
-
42
ns
-
460
nC
-
19
Amps
MIN
TYP
IRRM
IF = 15A, diF/dt = -200A/µs
VR = 200V, TC = 25°C
Maximum Reverse Recovery Current
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
IF = 15A, diF/dt = -200A/µs
VR = 200V, TC = 125°C
Maximum Reverse Recovery Current
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
IRRM
IF = 15A, diF/dt = -1000A/µs
VR = 200V, TC = 125°C
Maximum Reverse Recovery Current
ns
nC
-
-
Amps
Amps
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol
Characteristic / Test Conditions
RθJC
Junction-to-Case Thermal Resistance
RθJA
Junction-to-Ambient Thermal Resistance
WT
1.35
80
Package Weight
Torque
MAX
oz
1.9
g
10
lb•in
1.1
N•m
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.9
0.7
0.8
0.5
Note:
0.6
PDM
Z JC, THERMAL IMPEDANCE (°C/W)
θ
1.4
1.0
0.3
0.4
0
0.1
SINGLE PULSE
0.05
10-5
Duty Factor D = t1/t2
10-4
Peak TJ = PDM x ZθJC + TC
10-3
10-2
10-1
1.0
RECTANGULAR PULSE DURATION (seconds)
FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION
RC MODEL
5-2004
Junction
temp (°C)
053-3010 Rev C
t1
t2
0.2
Power
(watts)
0.725 °C/W
0.00166 J/°C
0.455 °C/W
0.0381 J/°C
0.172 °C/W
0.645 J/°C
Case temperature (°C)
FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL
°C/W
0.07
Maximum Mounting Torque
1.2
UNIT
TYPICAL PERFORMANCE CURVES
30
20
10
TJ = -55°C
TJ = 125°C
0.05
1
1.5
2
VF, ANODE-TO-CATHODE VOLTAGE (V)
Figure 2. Forward Current vs. Forward Voltage
600
500
30A
400
15A
300
200
7.5A
100
0
0
200
400
600
800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 4. Reverse Recovery Charge vs. Current Rate of Change
1.2
Kf, DYNAMIC PARAMETERS
(Normalized to 1000A/µs)
trr
15A
60
7.5A
40
20
0
200
400
600
800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE(A/µs)
Figure 3. Reverse Recovery Time vs. Current Rate of Change
TJ = 125°C
VR = 200V
30A
20
15
15A
10
7.5A
5
0
0
200
400
600
800 1000 1200
-diF /dt, CURRENT RATE OF CHANGE (A/µs)
Figure 5. Reverse Recovery Current vs. Current Rate of Change
40
Qrr
35
1.0
30
IRRM
0.8
30A
80
25
TJ = 125°C
VR = 200V
TJ = 125°C
VR = 200V
0
0
IRRM, REVERSE RECOVERY CURRENT
(A)
0
Qrr, REVERSE RECOVERY CHARGE
(nC)
TJ = 25°C
TJ = 150°C
trr, REVERSE RECOVERY TIME
(ns)
40
trr
0.6
Qrr
0.4
IF(AV) (A)
IF, FORWARD CURRENT
(A)
50
APT15D30K_SA
100
60
25
20
15
10
0.2
0.0
5
0
25
50
75
100
125
150
TJ, JUNCTION TEMPERATURE (°C)
Figure 6. Dynamic Parameters vs. Junction Temperature
0
Duty cycle = 0.5
TJ = 150°C
25
50
75
100
125
150
Case Temperature (°C)
Figure 7. Maximum Average Forward Current vs. CaseTemperature
250
200
150
5-2004
100
50
0
.7 1
10
100 200
VR, REVERSE VOLTAGE (V)
Figure 8. Junction Capacitance vs. Reverse Voltage
053-3010 Rev C
CJ, JUNCTION CAPACITANCE
(pF)
300
APT15D30K_SA
Vr
diF /dt Adjust
+18V
APT30M75BLL
0V
D.U.T.
30µH
trr/Qrr
Waveform
PEARSON 2878
CURRENT
TRANSFORMER
Figure 9. Diode Test Circuit
1
IF - Forward Conduction Current
2
diF /dt - Rate of Diode Current Change Through Zero Crossing.
3
IRRM - Maximum Reverse Recovery Current.
4
trr - Reverse Recovery Time, measured from zero crossing where diode
current goes from positive to negative, to the point at which the straight
line through IRRM and 0.25 IRRM passes through zero.
5
1
4
Zero
5
3
0.25 IRRM
2
Qrr - Area Under the Curve Defined by IRRM and trr.
Figure 10, Diode Reverse Recovery Waveform and Definitions
10.66 (.420)
9.66 (.380)
1.39 (.055)
0.51 (.020)
12.192 (.480)
9.912 (.390)
Cathode
4.08 (.161) Dia.
3.54 (.139)
3.42 (.135)
2.54 (.100)
5.33 (.210)
4.83 (.190)
6.85 (.270)
5.85 (.230)
Cathode
(Heat Sink)
TO-263 (D2) Surface mount Package outline
TO-220AB Package Outline
4.45 (.175)
4.57 (.180)
1.27 (.050)
1.32 (.052)
0.050 (.002)
10.06 (.396)
10.31 (.406)
7.54 (.297)
7.68 (.303)
1.40 (.055)
1.65 (.065)
6.02 (.237)
6.17 (.243)
8.51 (.335)
8.76 (.345)
053-3010 Rev C
5-2004
0.330 (.013)
0.432 (.017)
0.080 (2.032)
MAX.
0.50 (.020)
0.41 (.016)
2.92 (.115)
2.04 (.080)
4.82 (.190)
3.56 (.140)
14.73 (.580)
12.70 (.500)
3.683 (.145)
MAX.
Cathode
Anode
1.01 (.040) 2-Plcs.
.83 (.033)
5.33 (.210)
4.83 (.190)
Dimensions in Millimeters and (Inches)
1.77 (.070) 2-Plcs.
1.15 (.045)
0.000 (.000)
0.254 (.010)
2.62 (.103)
2.72 (.107)
1.22 (.048)
1.32 (.052)
{3 Plcs.}
0.762 (.030)
0.864 (.034)
{2 Plcs.}
2.54 (.100) BSC
{2 Plcs.}
3.68 (.145)
6.27 (.247)
(Base of Lead)
Heat Sink (Cathode)
and Leads are Plated
Anode
Cathode
Dimensions in Millimeters (Inches)
APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522
5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.