1 3 T- Ma 2 1 - Anode 1 2 - Common Cathode Back of Case - Cathode 3 - Anode 2 x APT60S20B2CT 1 200V 2X75A 3 2 HIGH VOLTAGE SCHOTTKY DIODE PRODUCT APPLICATIONS PRODUCT FEATURES PRODUCT BENEFITS • Parallel Diode • Ultrafast Recovery Times • Low Losses • Soft Recovery Characteristics • Low Noise Switching • Popular T-MAX™ Package • Cooler Operation • Low Forward Voltage • Higher Reliability Systems • High Blocking Voltage • Increased System Power • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) 48 Volt Output Rectifiers High Speed Rectifiers • Low Leakage Current MAXIMUM RATINGS Symbol VR All Ratings Are Per Leg: TC = 25°C unless otherwise specified. Characteristic / Test Conditions Maximum Peak Repetitive Reverse Voltage VRWM Maximum Working Peak Reverse Voltage IF(AV) Maximum Average Forward Current (TC = 123°C, Duty Cycle = 0.5) IFSM TJ,TSTG APT60S20B2CT UNIT 200 Volts Maximum D.C. Reverse Voltage VRRM IF(RMS) Density 75 RMS Forward Current (Square wave, 50% duty) 208 Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) 600 Amps -55 to 150 Operating and StorageTemperature Range TL Lead Temperature for 10 Sec. 300 EVAL Avalanche Energy (2A, 30mH) 60 °C mJ STATIC ELECTRICAL CHARACTERISTICS Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance, VR = 200V TYP MAX IF = 60A .83 .90 IF = 120A .98 IF = 60A, TJ = 125°C .72 VR = VR Rated APT Website - http://www.advancedpower.com Volts 1 VR = VR Rated, TJ = 125°C 25 300 UNIT mA pF 2-2004 VF MIN 053-6043 Rev B Symbol DYNAMIC CHARACTERISTICS APT60S20B2CT Characteristic Symbol Test Conditions trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM MIN TYP - 55 ns - 160 nC - 5 - 100 ns - 490 nC - 10 - 80 ns - 1100 nC - 27 Amps MIN TYP IF = 60A, diF/dt = -200A/µs VR = 133V, TC = 25°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 60A, diF/dt = -200A/µs VR = 133V, TC = 125°C Maximum Reverse Recovery Current trr Reverse Recovery Time Qrr Reverse Recovery Charge IRRM IF = 60A, diF/dt = -700A/µs VR = 133V, TC = 125°C Maximum Reverse Recovery Current MAX - - UNIT Amps Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions MAX RθJC Junction-to-Case Thermal Resistance .30 RθJA Junction-to-Ambient Thermal Resistance 40 WT Package Weight oz 5.9 g 0.30 0.9 0.25 0.7 0.20 0.3 0.10 0.05 0 Note: PDM Z JC, THERMAL IMPEDANCE (°C/W) θ 0.35 0.5 Duty Factor D = t1/t2 SINGLE PULSE Peak TJ = PDM x ZθJC + TC 0.05 10-5 10-4 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL 2-2004 Junction temp (°C) 053-6043 Rev B t1 t2 0.1 Power (watts) 0.0218 °C/W 0.00450 J/°C 0.119 °C/W 0.0119 J/°C 0.160 °C/W 0.121 J/°C Case temperature (°C) FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL °C/W 0.22 APT Reserves the right to change, without notice, the specifications and information contained herein. 0.15 UNIT TYPICAL PERFORMANCE CURVES TJ = 25°C 140 120 100 80 60 TJ = 125°C 40 TJ = 150°C 20 0.2 0.4 0.6 0.8 1 1.2 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage Qrr, REVERSE RECOVERY CHARGE (nC) 1800 1600 1400 120A 1200 1000 60A 800 600 30A 400 200 0 0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change Kf, DYNAMIC PARAMETERS (Normalized to 700A/µs) 1.2 1.0 IRRM 80 60 30A 40 20 TJ = 125°C VR = 133V 30 120A 25 20 60A 15 10 30A 5 0 0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 250 Duty cycle = 0.5 TJ = 150°C 200 Qrr trr 0.6 60A 0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change trr Qrr 0.8 100 35 TJ = 125°C VR = 133V 120A TJ = 125°C VR = 133V 0 0 IRRM, REVERSE RECOVERY CURRENT (A) 0 IF(AV) (A) IF, FORWARD CURRENT (A) 160 trr, REVERSE RECOVERY TIME (ns) TJ = -55°C 180 APT60S20B2CT 120 200 150 100 0.4 0.0 Lead Temperature Limited 50 0.2 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 0 25 50 75 100 125 150 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 4000 3000 2-2004 2000 1000 0 .3 1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 053-6043 Rev B CJ, JUNCTION CAPACITANCE (pF) 5000 APT60S20B2CT Vr diF /dt Adjust +18V APT20M36BLL 0V D.U.T. 30µH trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 IF - Forward Conduction Current 2 diF /dt - Rate of Diode Current Change Through Zero Crossing. 3 IRRM - Maximum Reverse Recovery Current. 4 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. 5 1 4 Zero 5 3 0.25 IRRM 2 Qrr - Area Under the Curve Defined by IRRM and trr. Figure 10, Diode Reverse Recovery Waveform and Definitions T-MAXTM (B2) Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) Common Cathode 20.80 (.819) 21.46 (.845) 4.50 (.177) Max. 19.81 (.780) 20.32 (.800) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 053-6043 Rev B 2-2004 0.40 (.016) 0.79 (.031) 2.21 (.087) 2.59 (.102) 2.87 (.113) 3.12 (.123) Anode 1 Common Cathode Anode 2 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.