APT50GT120JU3 ISOTOP® Buck chopper Trench IGBT VCES = 1200V IC = 50A @ Tc = 80°C C Application · AC and DC motor control · Switched Mode Power Supplies G E A A E Benefits · Low conduction losses · Stable temperature behavior · Very rugged · Direct mounting to heatsink (isolated package) · Low junction to case thermal resistance · Easy paralleling due to positive TC of VCEsat C G Features · Trench + Field Stop IGBT® Technology - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated · ISOTOP® Package (SOT-227) · Very low stray inductance · High level of integration ISOTOPÒ Absolute maximum ratings IFRMS Parameter Collector - Emitter Breakdown Voltage TC = 25°C TC = 80°C TC = 25°C Continuous Collector Current Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation Maximum Average Forward Current Duty cycle=0.5 TC = 25°C TC = 80°C RMS Forward Current (Square wave, 50% duty) Max ratings 1200 75 50 100 ±20 347 27 34 Unit V A V W A These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website – http://www.advancedpower.com 1-7 APT50GT120JU3 – Rev 0 April, 2004 Symbol VCES IC1 IC2 ICM VGE PD IFAV APT50GT120JU3 All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic BVCES Collector - Emitter Breakdown Voltage ICES Zero Gate Voltage Collector Current VCE(on) Collector Emitter on Voltage VGE(th) IGES Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions VGE = 0V, IC = 3mA VGE = 0V, VCE = 1200V Tj = 25°C VGE =15V IC = 50A Tj = 125°C VGE = VCE, IC = 2mA VGE = ±20V, VCE = 0V Min Typ Max 1200 1.4 1.7 2.0 5.0 5 2.1 Unit V mA V 6.5 500 V nA Max Unit Dynamic Characteristics Td(off) Tf Td(on) Tr Td(off) Tf Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Test Conditions VGE = 0V VCE = 25V f = 1MHz Resistive Switching (25°C) VGE = 15V VBus = 600V IC = 50A RG = 18W Inductive Switching (125°C) VGE = 15V VBus = 600V IC = 50A RG = 18W APT website – http://www.advancedpower.com Min Typ 3600 188 163 85 30 420 65 90 45 520 90 6.6 5.8 pF ns ns mJ 2-7 APT50GT120JU3 – Rev 0 April, 2004 Symbol Cies Coes Cres Td(on) Tr APT50GT120JU3 Diode ratings and characteristics Symbol VF Characteristic Diode Forward Voltage IRM Maximum Reverse Leakage Current CT Junction Capacitance Reverse Recovery Time trr Test Conditions IF = 30A IF = 60A IF = 30A VR = 1200V VR = 1200V VR = 200V IF=1A,VR=30V di/dt =100A/µs Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C 31 IF = 30A VR = 800V di/dt =200A/µs Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C 370 500 5 12 660 3450 220 4650 37 Reverse Recovery Time IRRM Qrr trr Qrr IRRM Maximum Reverse Recovery Current Reverse Recovery Charge Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 30A VR = 800V di/dt =1000A/µs Min Typ 2.0 2.3 1.8 Max 2.5 V 250 500 32 Tj = 125°C Unit µA pF ns A nC ns nC A Thermal and package characteristics Symbol Characteristic RthJC RthJA VISOL TJ,TSTG TL Torque Wt Min Typ IGBT Diode Junction to Case Junction to Ambient (IGBT & Diode) RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Storage Temperature Range Max Lead Temp for Soldering:0.063” from case for 10 sec Mounting torque (Mounting = 8-32 or 4mm Machine and terminals = 4mm Machine) Package Weight 2500 -55 Max 0.36 1.1 20 Unit °C/W V 150 300 1.5 29.2 °C N.m g Ope rating Freque ncy vs Colle ctor Current 60 V CE =600V D=50% RG=18 Ω TJ =125°C 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 IC (A) APT website – http://www.advancedpower.com 3-7 APT50GT120JU3 – Rev 0 April, 2004 Fmax, Operating Frequency (kHz) Typical IGBT Performance Curve APT50GT120JU3 Output Characteristics (VGE=15V) Output Characteristics 100 100 TJ=125°C 50 25 VGE=15V 50 VGE=9V 0 0 1 2 VCE (V) 3 4 0 1 2 VCE (V) 3 4 Energy losses vs Collector Current Transfert Characteristics 100 20 TJ=25°C 75 VCE = 600V VGE = 15V RG = 18 Ω TJ = 125°C 16 E (mJ) TJ=125°C 50 25 12 Eon 8 Eoff 4 0 0 5 6 7 8 9 VGE (V) 10 11 0 12 25 50 75 100 IC (A) Switching Energy Losses vs Gate Resistance Reverse Safe Operating Area 12 120 Eon VCE = 600V VGE =15V IC = 50A TJ = 125°C 8 100 80 Eoff IC (A) 10 E (mJ) VGE=13V 25 0 IC (A) VGE=17V 75 IC (A) 75 IC (A) TJ = 125°C TJ=25°C 6 60 4 40 2 20 0 VGE=15V TJ=125°C RG=18 Ω 0 5 10 15 20 25 Gate Resistance (ohms) 30 0 400 800 VCE (V) 1200 1600 maximum Effective Transient Thermal Impedance, Junction to Pulse Duration 0.35 0.3 0.25 0.2 0.15 IGBT 0.9 0.7 0.5 0.3 0.1 0.05 0 0.00001 0.1 Single Pulse 0.05 0.0001 0.001 0.01 0.1 1 10 rectangular Pulse Duration (Seconds) APT website – http://www.advancedpower.com 4-7 APT50GT120JU3 – Rev 0 April, 2004 Thermal Impedance (°C/W) 0.4 APT50GT120JU3 APT website – http://www.advancedpower.com 5-7 APT50GT120JU3 – Rev 0 April, 2004 Typical Diode Performance Curve APT website – http://www.advancedpower.com 6-7 APT50GT120JU3 – Rev 0 April, 2004 APT50GT120JU3 APT50GT120JU3 SOT-227 (ISOTOP®) Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 1.95 (.077) 2.14 (.084) Anode 30.1 (1.185) 30.3 (1.193) Collector * Emitter terminals are shorted internally. Current handling capability is equal for either Emitter terminal. 38.0 (1.496) 38.2 (1.504) Emitter Gate ISOTOP® is a Registered Trademark of SGS Thomson APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website – http://www.advancedpower.com 7-7 APT50GT120JU3 – Rev 0 April, 2004 Dimensions in Millimeters and (Inches)