APTGF15X120E2 APTGF15X120P2 3 Phase bridge NPT IGBT Power Module VCES = 1200V IC = 15A @ Tc = 80°C Application • AC Motor control Features Non Punch Through (NPT) IGBT® - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated Kelvin emitter for easy drive Very low stray inductance High level of integration • Pin out: APTGF15X120E2 (Long pins) N- U V W P+ • • • 1 2 3 4 5 6 7 8 9 10 11 12 Benefits • • • • • • • Pin out: APTGF15X120P2 (Short pins) N- 1 2 U 3 4 V 5 6 W 7 8 9 10 P+ Stable temperature behavior Very rugged Solderable terminals for easy PCB mounting Direct mounting to heatsink (isolated package) Low junction to case thermal resistance Easy paralleling due to positive TC of VCEsat Low profile 11 12 Symbol VCES Parameter Collector - Emitter Breakdown Voltage IC Continuous Collector Current ICM VGE PD Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation SCSOA Short Circuit Safe Operating Area TC = 25°C Max ratings 1200 25 15 50 ±20 145 Tj = 125°C 150A@1200V TC = 25°C TC = 80°C TC = 25°C Unit V A V W These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website – http://www.advancedpower.com 1-4 APTGF15X120E2(P2) – Rev 0 Absolute maximum ratings November, 2003 All ratings @ Tj = 25°C unless otherwise specified APTGF15X120E2 APTGF15X120P2 ICES Zero Gate Voltage Collector Current VCE(on) Collector Emitter on Voltage VGE(th) IGES Gate Threshold Voltage Gate – Emitter Leakage Current Dynamic Characteristics Symbol Cies Coes Cres Td(on) Tr Td(off) Tf Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Reverse diode ratings and characteristics Symbol Characteristic VF Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge Test Conditions VGE = 0V, IC = 500µA Tj = 25°C VGE = 0V VCE = 1200V Tj = 125°C Tj = 25°C VGE =15V IC = 15A Tj = 125°C VGE = VCE , IC = 0.6 mA VGE = 20V, VCE = 0V Typ Max 300 1200 2.5 3.1 5.5 500 3.0 3.7 6.5 150 V nA Typ 1000 150 70 55 Max Unit 45 90 400 70 600 100 Tj = 25°C Tj = 125°C Typ 2.4 1.9 Max 2.9 Tj = 125°C 0.1 Tj = 25°C 1 Tj = 125°C 3 Test Conditions VGE = 0V VCE = 25V f = 1MHz TJ TSTG TC Torque Wt 4.5 Inductive Switching (125°C) VGE = ±15V VBus = 600V IC = 15A RG = 82Ω Test Conditions IF = 15A VGE = 0V IF = 15A VR = 600V di/dt =800A/µs IF = 15A VR = 600V di/dt =800A/µs Min Symbol Characteristic VISOL 1200 Min Thermal and package characteristics RthJC Min Junction to Case RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque To Heatsink Package Weight Min IGBT Diode Typ M5 APT website – http://www.advancedpower.com µA V pF 110 ns Unit V µs µC Max 0.85 1.5 2500 -40 -40 -40 2 Unit V Unit °C/W V 150 125 125 3.5 185 °C November, 2003 Symbol Characteristic BVCES Collector - Emitter Breakdown Voltage N.m g 2-4 APTGF15X120E2(P2) – Rev 0 Electrical Characteristics APTGF15X120E2 APTGF15X120P2 Package outline ALL DIMENSIONS MARKED " * " ARE TOLERENCED AS : APT website – http://www.advancedpower.com 3-4 APTGF15X120E2(P2) – Rev 0 November, 2003 Pin out: APTGF15X120E2 (Long pins) APTGF15X120E2 APTGF15X120P2 Package outline ALL DIMENSIONS MARKED " * " ARE TOLERENCED AS : APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website – http://www.advancedpower.com 4-4 APTGF15X120E2(P2) – Rev 0 November, 2003 Pin out: APTGF15X120P2 (Short pins)