APTGT300A120D3 Phase Leg VCES = 1200V IC = 300A @ Tc = 80°C ® Trench IGBT Power Module Application • Welding converters • Switched Mode Power Supplies • Uninterruptible Power Supplies • Motor control 3 4 5 Features • Trench + Field Stop IGBT® Technology - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated • Kelvin emitter for easy drive • Low stray inductance - M6 power connectors • High level of integration 1 Q2 6 7 3 2 2 Benefits • Outstanding performance at high frequency operation • Stable temperature behavior • Very rugged • Direct mounting to heatsink (isolated package) • Low junction to case thermal resistance • Easy paralleling due to positive TC of VCEsat 1 4 5 7 6 Absolute maximum ratings Symbol VCES Parameter Collector - Emitter Breakdown Voltage IC Continuous Collector Current ICM VGE PD Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation SCSOA Short Circuit Safe Operating Area TC = 25°C Max ratings 1200 440 300 750 ±20 1250 Tj = 125°C 1100A@900V TC = 25°C TC = 80°C TC = 25°C Unit V A V W These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website – http://www.advancedpower.com 1-3 APTGT300A120D3 – Rev 0 January, 2004 Q1 APTGT300A120D3 All ratings @ Tj = 25°C unless otherwise specified Symbol Characteristic BVCES Collector - Emitter Breakdown Voltage ICES Zero Gate Voltage Collector Current VCE(on) Collector Emitter on Voltage VGE(th) IGES Gate Threshold Voltage Gate – Emitter Leakage Current Dynamic Characteristics Symbol Cies Coes Cres Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Reverse diode ratings and characteristics Symbol Characteristic VF Diode Forward Voltage Erec Reverse Recovery Energy Qrr Reverse Recovery Charge Test Conditions VGE = 0V, IC = 12mA VGE = 0V, VCE = 1200V Tj = 25°C VGE = 15V IC = 300A Tj = 125°C VGE = VCE , IC = 12mA VGE = 20V, VCE = 0V Test Conditions VGE = 0V VCE = 25V f = 1MHz Inductive Switching (25°C) VGE = ±15V VBus = 600V IC = 300A RG = 2.2Ω Inductive Switching (125°C) VGE = ±15V VBus = 600V IC = 300A RG = 2.2Ω Test Conditions IF = 300A VGE = 0V IF = 300A VR = 600V di/dt =900A/µs IF = 300A VR = 600V di/dt =900A/µs TJ TSTG TC Torque Wt Junction to Case RMS Isolation Voltage, any terminal to case t =1 min, I isol<1mA, 50/60Hz Operating junction temperature range Storage Temperature Range Operating Case Temperature For terminals Mounting torque To Heatsink Package Weight Typ 1.7 2.0 5.8 Typ 20 1.2 1 250 90 550 Max 8 2.1 6.5 800 V nA Max Unit nF ns 100 ns 650 180 Typ 1.6 1.6 Tj = 125°C 24 Tj = 25°C 28 Tj = 125°C 56 Min IGBT Diode Typ Max 2.1 -40 -40 -40 3 3 Unit V mJ µC Max 0.1 0.15 2500 APT website – http://www.advancedpower.com V 300 Min M6 M6 Unit V mA 130 Tj = 25°C Tj = 125°C Symbol Characteristic VISOL 5.0 Min Thermal and package characteristics RthJC Min 1200 Unit °C/W V 150 125 125 5 5 380 °C N.m g 2-3 APTGT300A120D3 – Rev 0 January, 2004 Electrical Characteristics APTGT300A120D3 APT reserves the right to change, without notice, the specifications and information contained herein APT's products are covered by one or more of U.S patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. U.S and Foreign patents pending. All Rights Reserved. APT website – http://www.advancedpower.com 3-3 APTGT300A120D3 – Rev 0 January, 2004 Package outline