ADVANCEDPHOTONIX PDI-E837

GaAlAs High power IR LED Emitters
(660nm/880nm) PDI-E837
PACKAGE DIMENSIONS INCH [mm]
.205 [5.21]
.055 [1.40]
.025 [0.64]
RED L.E.D.
WIRE BOND
I.R. L.E.D.
.225 [5.71]
METALIZED CERAMIC
SUBSTRATE
CLEAR
ENCAPSULATE
3X SOLDER PAD
CONTACT C
CONTACT B
CONTACT A
Metalized Ceramic Package
FEATURES
DESCRIPTION
APPLICATIONS
• Low Cost
• 660 nm +/- 3nm
• 3 drive line
The PDI-E837 is a three drive line dual emitter
oximeter component. The 660 and 880nm GaAlAs
infrared emitters are mounted in a glob toped low
cost ceramic SMT package. The LEDs have a
common anode.
• Oximeter Probes
• Finger Clamps
• Reusable probes
ABSOLUTE MAXIMUM RATING (TA)= 23°C UNLESS OTHERWISE NOTED
SYMBOL PARAMETER
MIN
MAX
UNITS
Pd
Power Dissipation
250
mW
If
Continuous Forward Current
30
mA
Ip
Peak Forward Current
200
mA
Vr
Reverse Voltage
4
V
TSTG
Storage Temperature
-40
+80
TO
Operating Temperature
-40
+80
°C
°C
TS
Soldering Temperature*
+240
°C
SCHEMATIC
B
660 nm
LED
880 nm
LED
A
C
MIN
1.8
880 nm
TYP MAX
2.0
* 1/16 inch from case for 3 seconds max.
ELECTRO-OPTICAL CHARACTERISTICS RATING (TA)= 23°C UNLESS OTHERWISE NOTED
SYMBOL
Po
Iv
Vf
Vr
lp
Δl
tr
tf
CHARACTERISTIC
TEST CONDITIONS
Radiant Flux
Luminous Intensity
Forward Voltage
Reverse Breakdown Voltage
Peak Wavelength
Spectral Halfwidth
Rise Time
Fall Time
If = 20 mA
If= 20 mA
If = 20 mA
If = 10 μA
If = 20 mA
If = 20 mA
If = 20 mA
If = 20 mA
MIN
1.8
20
5
658
660 nm
TYP MAX
2.4
57
1.8
2.4
661
21
0.1
0.04
664
5
870
1.3
1.7
880
50
0.8
0.8
890
UNITS
mW
mcd
V
V
nm
nm
uS
uS
Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are
subject to change without notice.
Advanced Photonix Inc. 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 • Fax (805) 484-9935 • www.advancedphotonix.com