PT-10E Product Bulletin (Preliminary) • January 2003 • Differential-output PIN/TIA receiver • High data rate, up to 10.7 Gb/s • High sensitivity, -20 dBm • 1200–1650 nm wavelength range • Compact butterfly package • Dual coplanar output The PT-10E is a -20 dBm sensitivity receiver module for OC-192 / STM-64 Specifications transmission system receive applications Wavelength range up to 10.7 Gb/s. It couples a high responsivity (1 A/W), back-illuminated Bandwidth (-3dB electrical) Low frequency cutoff 1 PIN photodiode, usable from 1200 nm to Sensitivity 2 Overload 1650 nm, with an internal transimpedance Responsivity @ 1550 nm Cinversion gain (differential) gain stage of 1600 V/A. This combination produces a receiver with a 8.5 GHz band- Electrical Return Loss (< 8 GHz) Optical Return Loss width and conversion gain of 1500 V/W. Power dissipation Minimum Typical Maximum Units 1200 8 1650 8.5 25 0 -20 >1 0.9 1300 1.0 1500 nm GHz kHz -18 dBm dBm A/W Ù -10 -30 dB dB .36 W DC Electrical The differential-output module is available with a coplanar waveguide package with single-mode fiber input. The receiver Photodiode voltage +4 +5 +8 V Amplifier voltage -5.5 -5.2 -4.9 V Mechanical meets Telcordia GR-468 qualification Package type standards. Operating temperature Storage temperature 1 Output is DC coupled 2 10 -10 BER, PRBS 2 23-1 Surface mount coplanar 0 -40 +70 +85 °C °C PT-10E Product Specifications .050 TYP. 16 11 .820 10 1 6 .608 Single-mode fiber with 900µm buffer (1 meter typical) 1.174 1.017 7 .095 .709 .152 .272 .911 1.721 Pin Description Pin Description 1 VPD 9 Data Out P 2 3 GND VAMP 10 11 GND NC 4 5 NC NC 12 13 DC Out N DC Out P 6 7 NC GND 14 15 Decision Threshold GND 8 Data Out N 16 NC Application Notes Electrostatic discharge (ESD) will cause permanent damage to the product. Please avoid any ESD to the input pins or output connector. Use standard ESD protective equipment when handling this product. PT-10E Ordering Information Base model PT-10E Option format /Package/Fiber connector Package options Fiber connector options 16CPW FC or SC Temperature and fiber restrictions are as follows: Lead soldering: 250°C for no more than 10 seconds Fiber feed-through tube: 120°C Fiber pull force: 10 N Fiber bending radius: 1 inch or less Exceeding these conditions can cause permanent damage to the device. Quality Vision As a leader in ultrafast optical receivers, Picometrix is committed to providing the highest quality ultrafast products on the market. This quality vision commits us to continually improving our product designs and manufacturing processes, in order to ensure the highest level of customer satisfaction. The company maintains a stringent quality control program to ensure that all products meet or surpass customer requirements. Ann Arbor, MI • 48113-0243 734-998-4501 • 734-998-3474 fax www.picometrix.com © 2003 Picometrix, Inc. All rights reserved. Specifications and output data subject to change without notice. PB-PT-10E-0103-A PT-10E Picometrix, Inc. • PO Box 130243