PT-10A Product Bulletin (Preliminary) • February 2002 • PIN/TIA receiver module • High data rate, up to 10.7 Gb/s • High sensitivity, -19 dBm • 1200–1650 nm wavelength range • Compact 8-pin butterfly package • SMA or GPO output connector The PT-10A is a -19 dBm sensitivity, single-output receiver module for Specifications OC-192 / STM-64 transmission system Wavelength range receive applications up to 10.7 Gb/s. It couples a high responsivity (1 A/W), back-illuminated PIN photodiode, usable from 1200 nm to 1650 nm, with an Typical 1200 Maximum 1650 Bandwidth (-3dB electrical) Low frequency cutoff1 8 30 Sensitivity2 Overload 0 -19 +1 0.9 400 1.0 500 Responsivity @ 1550 nm Transimpedance gain internal transimpedance gain stage of Minimum 9 Units nm GHz kHz -17 dBm dBm A/W Ω 500 V/A. This combination produces a Output Return Loss (< 8 GHz) Optical Return Loss -10 -30 dB dB receiver with a 9 GHz bandwidth and Power dissipation 0.9 W conversion gain of 500 V/W. DC Electrical Photodiode voltage The single-coaxial output module is Amplifier voltage available with either an SMA or GPO +10 +15 V +8 +8.5 V Mechanical output connector in a compact, 8-pin Package type butterfly package with single-mode fiber Operating temperature Storage temperature input. A single +8V power supply can be used. The receiver meets Telcordia +8 +7.6 1 Output is DC coupled 2 10 -10 BER, PRBS 223-1 8-pin butterfly with SMA or GPO 0 -50 +70 +85 °C °C GR-468 qualification standards. PT-10A Eye pattern taken at 10 Gb/s data rate with -7 dBm optical input power. Product Specifications .100 TYP. .015±.003 TYP. 4X #2–56 CLEARANCE SLOT (ø.095) 0 5 .354 1 .500 4 Electrical (dB) 8 -3 -6 -9 -12 0 2 .725 4 6 8 10 12 14 Frequency (GHz) 1.664 Single-mode fiber with 900µm buffer (1 meter typical) .520 .406 .251 .229 .060 .881 1.035 Pin Description Application Notes Pin Description 1 NC 5 NC 2 3 VPD VPOS 6 7 NC NC 4 GND 8 NC Electrostatic discharge (ESD) will cause permanent damage to the product. Please avoid any ESD to the input pins or output connector. Use standard ESD protective equipment when handling this product. PT-10A Ordering Information Base model PT-10A Option format /Package/Fiber connector Package options Fiber connector options 8SMA or 8GPO FC or SC Temperature and fiber restrictions are as follows: Lead soldering: 250°C for no more than 10 seconds Fiber feed-through tube: 120°C Fiber pull force: 10 N Fiber bending radius: 1 inch or less Exceeding these conditions can cause permanent damage to the device. Quality Vision As a leader in ultrafast optical receivers, Picometrix is committed to providing the highest quality ultrafast products on the market. This quality vision commits us to continually improving our product designs and manufacturing processes, in order to ensure the highest level of customer satisfaction. The company maintains a stringent quality control program to ensure that all products meet or surpass customer requirements. Ann Arbor, MI • 48113-0243 734-998-4501 • 734-998-3474 fax www.picometrix.com © 2002 Picometrix, Inc. All rights reserved. Specifications and output data subject to change without notice. PB-PT-10A-0202-A PT-10A Picometrix, Inc. • PO Box 130243