PA-10A Product Bulletin (Preliminary) • February 2002 • PIN/TIA/AGC receiver • High data rate, up to 10.7 Gb/s • High sensitivity, -18 dBm • 1200–1650 nm wavelength range • 14-pin SMA or dual GPO butterfly package The PA-10A is a -18 dBm sensitivity receiver module with an integrated automatic gain control amplifier for Specifications OC-192 / STM-64 transmission system Wavelength range receive applications up to 10.7 Gb/s. Bandwidth (-3dB electrical) Low frequency cutoff1 8 30 Sensitivity 2 Overload 0 -18 +1 0.9 5000 1.0 6000 It couples a high responsivity (1 A/W), back-illuminated PIN photodiode, usable Responsivity @ 1550 nm Conversion gain (single ended) from 1200 nm to 1650 nm, with an internal >20 dB automatic gain control amplifier. 1200 Maximum 1650 9 Units nm GHz kHz Power dissipation This combination produces a receiver with -17 dBm dBm A/W V/W -10 -30 dB dB 4 W DC Electrical an 9 GHz bandwidth and an adjustable Photodiode voltage conversion gain of up to 6000 V/W. TIA voltage AGC voltage The single-coaxial output module is +8 +10 +15 V +7.6 -8.4 +8 -8 +8.5 -7.6 V V Mechanical available with an SMA output connector and Package type the differential output module is available Operating temperature Storage temperature with dual GPO output connectors, in a single-mode fiber input. The receiver meets Typical Output Return Loss (< 8 GHz) Optical Return Loss 500 V/A transimpedance gain stage and a compact, 14-pin butterfly package with Minimum 1 Output is DC coupled 2 10 -10 BER, PRBS 223-1 14-pin butterfly with SMA 0 -40 +70 +85 °C °C Telcordia GR-468 qualification standards. PA-10A Eye pattern taken at 10 Gb/s data rate with -10 dBm optical input power. Product Specifications .100 TYP. 3 .015±.003 TYP. CLEARANCE HOLE (ø.095) 14 8 .354 1 .500 Electrical (dB) 0 4X #2–56 -3 -6 -9 -12 7 -15 0 2 4 6 8 10 12 Frequency (GHz) 1.025 1.638 .820 Single-mode fiber with 900µm buffer (1 meter typical) .437 .273 .273 .059 1.181 Photo: Dual GPO output connector module [14DGPO] 1.336 Pin Description Pin Description 1 NC 8 NC 2 3 GND VTIA 9 10 Peak Det. Ref. VEE 4 5 AGC VEE 11 12 NAGC VPD 6 7 Peak Det. NC 13 14 GND NC Application Notes Electrostatic discharge (ESD) will cause permanent damage to the product. Please avoid any ESD to the input pins or output connector. Use standard ESD protective equipment when handling this product. PA-10A Ordering Information Base model PA-10A Option format /Package/Fiber connector Package options Fiber connector options 14DGPO or 14SMA FC or SC Temperature and fiber restrictions are as follows: Lead soldering: 250°C for no more than 10 seconds Fiber feed-through tube: 120°C Fiber pull force: 10 N Fiber bending radius: 1 inch or less Exceeding these conditions can cause permanent damage to the device. Quality Vision As a leader in ultrafast optical receivers, Picometrix is committed to providing the highest quality ultrafast products on the market. This quality vision commits us to continually improving our product designs and manufacturing processes, in order to ensure the highest level of customer satisfaction. The company maintains a stringent quality control program to ensure that all products meet or surpass customer requirements. Ann Arbor, MI • 48113-0243 734-998-4501 • 734-998-3474 fax www.picometrix.com © 2002 Picometrix, Inc. All rights reserved. Specifications and output data subject to change without notice. PB-PA-10A-0202-A PA-10A Picometrix, Inc. • PO Box 130243