PT-10B Product Bulletin (Preliminary) • February 2002 • PIN/TIA receiver • High data rate, up to 10.7 Gb/s • Broad wavelength range, 750–1650 nm • 50 µm or 62.5 µm multimode fiber input with SC or FC • High sensitivity, -17 dBm @ 850 nm • GPO output connector The PT-10B is a single-output receiver Specifications module for 10 Gb Ethernet, Fiber Channel and VSR OC-192 transmission system receive applications up to 10.7 Gb/s. It Minimum Wavelength range 750 Bandwidth (-3dB electrical) Low frequency cutoff1 8 DC Sensitivity @ 850 nm2 Sensitivity @ 1310 nm2 couples a high responsivity, front-illuminated PIN photodiode, usable from 750 nm to 1650 nm, with an internal transimpedance gain stage of 500 V/A. This combination produces a receiver with a 9 GHz bandwidth 1650 Units nm GHz kHz -15 -18 dBm dBm Overload @1310 Responsivity @ 850nm 0 0.5 +1 0.55 dBm A/W Responsivity @ 1310 nm Transimpedance gain 0.85 400 0.9 500 A/W Ω -12 Power dissipation The single-coaxial output module is Maximum 9 -17 -20 Output Return Loss (< 8 GHz) Optical Return Loss and conversion gain of 450 V/W at 1310 nm. Typical -10 -14 dB dB 1.0 W DC Electrical available with either an SMAor GPO Photodiode voltage output connector in a compact, 8-pin Amplifier voltage butterfly package with multimode fiber Mechanical input. The receiver meets Telcordia Package type GR-468 qualification standards. Operating temperature Storage temperature 1 Output is DC coupled 2 10 -10 BER, PRBS 223-1 +9 +10 +12 V +7.75 +8 +8.25 V 8-pin butterfly with GPO 0 -40 +70 +85 °C °C True DC Output Option The PT-10B is available with optional dual power supplies, which enables adjustment and/or stabilization of the DC output to enable accurate extinction ratio measurements. PT-10B Eye pattern taken at 10 Gb/s data rate with -7 dBm optical input power. Product Specifications .100 TYP. .015±.003 TYP. 4X #2–56 CLEARANCE SLOT (ø.095) 0 5 .354 1 Electrical (dB) 8 .500 4 -3 -6 -9 -12 0 2 4 6 8 10 12 14 Frequency (GHz) .725 1.511 Single-mode fiber with 900µm buffer (1 meter typical) .520 .344 .235 .211 .060 Pin Description 1 .881 Pin Description 1 NC (or DC Mon1) 5 NC 2 3 VPD VAMP 6 7 NC NC 4 GND (or VNEG1) 8 NC Application Notes Electrostatic discharge (ESD) will cause permanent damage to the product. Please avoid any ESD to the input pins or output connector. Use standard ESD protective equipment when handling this product. If ordered with true DC output option PT-10B Ordering Information Base model PT-10B Option format /Package/Fiber diameter/Fiber connector Package option Fiber diameter options (µm) Fiber connector options 8SMA or 8GPO 50 or 62.5 FC or SC Temperature and fiber restrictions are as follows: Lead soldering: 250°C for no more than 10 seconds Fiber feed-through tube: 120°C Fiber pull force: 10 N Fiber bending radius: 1 inch or less Exceeding these conditions can cause permanent damage to the device. Quality Vision As a leader in ultrafast optical receivers, Picometrix is committed to providing the highest quality ultrafast products on the market. This quality vision commits us to continually improving our product designs and manufacturing processes, in order to ensure the highest level of customer satisfaction. The company maintains a stringent quality control program to ensure that all products meet or surpass customer requirements. Ann Arbor, MI • 48113-0243 734-998-4501 • 734-998-3474 fax www.picometrix.com © 2002 Picometrix, Inc. All rights reserved. Specifications and output data subject to change without notice. PB-PT-10B-0202-A PT-10B Picometrix, Inc. • PO Box 130243