ALD ALD2726SB

ADVANCED
LINEAR
DEVICES, INC.
ALD2726E/ALD2726
DUAL EPAD™ ULTRA MICROPOWER OPERATIONAL AMPLIFIER
KEY FEATURES
BENEFITS
• EPAD ( Electrically Programmable Analog Device)
• User programmable VOS trimmer
• Computer-assisted trimming
• Rail-to-rail input/output
• Compatible with standard EPAD Programmer
• Each amplifier VOS can be trimmed to a different Vos level
• High precision through in-system circuit trimming
• Reduces or eliminates VOS, PSRR, CMRR and TCVOS errors
• System level “calibration” capability
• Application Specific Programming mode
• In-System Programming mode
• Electrically programmable to compensate for
external component tolerances
• 0.01pA input bias current and 35µV
input offset voltage
• ±1V to ±5V operation
•
GENERAL DESCRIPTION
The ALD2726E/ALD2726 is a dual monolithic rail-to-rail precision CMOS
operational amplifier with integrated user programmable EPAD (Electrically Programmable Analog Device) based offset voltage adjustment. The
ALD2726E/ALD2726 is a dual version of the ALD1726E/ALD1726 operational amplifier. Each ALD2726E/ALD2726 operational amplifier features
individual, user-programmable offset voltage trimming resulting in significantly enhanced total system performance and user flexibility. EPAD
technology is an exclusive ALD design which has been refined for analog
applications where precision voltage trimming is necessary to achieve a
desired performance. It utilizes CMOS FETs as in-circuit elements for
trimming of offset voltage bias characteristics with the aid of a personal
computer under software control. Once programmed, the set parameters
are stored indefinitely. EPAD offers the circuit designer a convenient and
cost-effective trimming solution for achieving the very highest amplifier/
system performance.
The ALD2726E/ALD2726 dual operational amplifier features rail-to-rail
input and output voltage ranges, tolerance to overvoltage input spikes of
300mV beyond supply rails, capacitive loading up to 25pF, extremely low
input currents of 0.01pA typical, high open loop voltage gain, useful
bandwidth of 700KHz, slew rate of 0.7V/µs, and low typical supply current
of 50µA for both amplifiers.
•
•
•
•
•
•
•
•
•
Eliminates manual and elaborate
system trimming procedures
Remote controlled automated trimming
In-System Programming capability
No external components
No internal clocking noise source
Simple and cost effective
Small package size
Extremely small total functional
volume size
Low system implementation cost
Micropower
APPLICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Sensor interface circuits
Transducer biasing circuits
Capacitive and charge integration circuits
Biochemical probe interface
Signal conditioning
Portable instruments
High source impedance electrode
amplifiers
Precision Sample and Hold amplifiers
Precision current to voltage converter
Error correction circuits
Sensor compensation circuits
Precision gain amplifiers
Periodic In-system calibration
System output level shifter
PIN CONFIGURATION
-IN A
1
14
VE 2A
+IN A
2
13
VE 1A
V-
3
12
OUT A
N/C
4
11
V+
N/C
5
10
OUT B
ORDERING INFORMATION
Operating Temperature Range
-55°C to +125°C
0°C to +70°C
0°C to +70°C
+IN B
6
9
VE 1B
14-Pin
CERDIP
Package
14-Pin
Small Outline
Package (SOIC)
14-Pin
Plastic Dip
Package
-IN B
7
8
VE 2B
ALD2726E DB
ALD2726 DB
ALD2726E SB
ALD2726 SB
ALD2726E PB
ALD2726 PB
TOP VIEW
DB, PB, SB PACKAGE
* Contact factory for industrial temperature range
© 1998 Advanced Linear Devices, Inc. 415 Tasman Drive, Sunnyvale, California 94089 -1706 Tel: (408) 747-1155 Fax: (408) 747-1286 http://www.aldinc.com
FUNCTIONAL DESCRIPTION
Functional Description of ALD2726
The ALD2726E/ALD2726 utilizes EPADs as in-circuit
elements for trimming of offset voltage bias characteristics.
Each ALD2726E/ALD2726 operational amplifier has a pair of
EPAD-based circuits connected such that one circuit is used to
adjust V OS in one direction and the other circuit is used to
adjust VOS in the other direction. While each of the basic
EPAD devices is monotonically adjustable, the VOS of the
ALD2721E can be adjusted many times in both directions.
Once programmed, the set VOS levels are stored permanently,
even when the device is removed.
The ALD2726 is pre-programmed at the factory under
standard operating conditions for minimum equivalent input
offset voltage. The ALD2726 offers similar programmable
features as the ALD2726E, but with more limited offset
voltage program range. It is intended for standard
operational amplifier applications where little or no electrical
programming by the user is necessary.
Functional Description of ALD2726E
The ALD2726E is pre-programmed at the factory under
standard operating conditions for minimum equivalent input
offset voltage. It also has a guaranteed offset voltage program
range, which is ideal for applications that require electrical
offset voltage programming.
The ALD2726E is an operational amplifier that can be trimmed
stand-alone, with user application-specific programming or insystem programming conditions. User application-specific
circuit programming refers to a situation where the Total Input
Offset Voltage of the ALD2726E can be trimmed with the actual
intended operating conditions.
Take the example of an application circuit that uses + 1V and
-1V power supplies, an operational amplifier input biased at
+1V, and an average operating temperature at +85°C; the
circuit can be wired up to these conditions within an environmental chamber with the ALD2726E inserted into a test socket
while it is being electrically trimmed. Any error in VOS due to
these bias conditions can be automatically zeroed out. The
Total VOS error is now limited only by the adjustable range and
the stability of V OS, and the input noise voltage of the
operational amplifier. This Total Input Offset Voltage, VOST,
now includes VOS, as VOS is traditionally specified; plus the
V OS error contributions from PSRR, CMRR, TCVOS, and
noise. Typically, VOST ranges approximately ±35µV for the
ALD2726E.
In-System Programming refers to the condition where the
EPAD adjustment is made after the ALD2726E has been
inserted into a circuit board. In this case, the circuit design must
provide for the ALD2726E to operate in both normal mode and
in programming mode. One of the benefits of in-system
programming is that not only the ALD276E offset voltage from
operating bias conditions has been accounted for, any residual
errors introduced by other circuit components, such as resistor
or sensor induced voltage errors, can also be programmed and
corrected. In this way, the “in-system” circuit output can be
adjusted to a desired level eliminating need for another
trimming function.
2
USER PROGRAMMABLE VOS FEATURE
Each ALD2726E/ALD2726 has four additional pins,
compared to a conventional dual operational amplifier which
has eight pins. These four additional pins are named VE1A,
VE2A for op amp A and VE1B, VE2B for op amp B. Each of
these pins VE1A, VE2A, VE1B, VE2B (represented by VExx)
are connected to a separate, internal offset bias circuit. VExx
pins have initial internal bias voltage values of approximately
1 to 2 Volts. The voltage on these pins can be programmed
using the ALD E100 EPAD Programmer and the appropriate
Adapter Module. The useful programming range of voltages
on VExx pins are 1 Volt to 3 Volts.
VExx pins are programming pins, used during electrical
programming mode to inject charge into the internal EPADs.
Increasing voltage on VE1A/VE1B increases the offset voltage whereas increasing voltage on VE2A/VE2B decreases
the offset voltage of op amp A and op amp B, respectively.
The injected charge is then permanently stored. After programming, VExx pins must be left open in order for these
voltages to remain at the programmed levels.
During programming, voltages on VExx pins are increased
incrementally to program the offset voltage of the operational
amplifier to the desired VOS. Note that desired VOS can be
any value within the offset voltage programmable ranges,
and can be either equal zero, a positive value or a negative
value. This VOS value can also be reprogrammed to a
different value at a later time, provided that the useful VE1x
or VE2x programming voltage range has not been
exceeded. VExx pins can also serve as capacitively coupled
input pins.
Internally, VE1 and VE2 are programmed and connected
differentially. Temperature drift effects between the two
internal offset bias circuits cancel each other and introduce
less net temperature drift coefficient change than offset
voltage trimming techniques such as offset adjustment with
an external trimmer potentiometer.
While programming, V+, VE1 and VE2 pins may be alternately pulsed with 12V (approximately) pulses generated by
the EPAD Programmer. In-system programming requires
the ALD2721E application circuit to accommodate these
programming pulses. This can be accomplished by adding
resistors at certain appropriate circuit nodes. For more
information, see Application Note AN1700.
Advanced Linear Devices
ALD2726E/ALD2726
ABSOLUTE MAXIMUM RATINGS
Supply voltage, V+
Differential input voltage range
Power dissipation
Operating temperature range PB,SB package
DB package
Storage temperature range
Lead temperature, 10 seconds
13.2V
-0.3V to V+ +0.3V
600 mW
0°C to +70°C
-55°C to +125°C
-65°C to +150°C
+260°C
OPERATING ELECTRICAL CHARACTERISTICS
TA = 25oC VS = ±2.5V unless otherwise specified
Parameter
Symbol
Supply Voltage
VS
V+
Min
2726E
Typ
±1.0
2.0
Max
±5.0
10.0
Min
2726
Typ
±1.0
2.0
Max
Unit
Test Conditions
±5.0
10.0
V
V
Single Supply
150
µV
RS ≤ 100KΩ
Initial Input Offset Voltage 1
VOS i
Offset Voltage Program Range 2
∆VOS
Programmed Input Offset
Voltage Error 3
VOS
50
100
50
150
µV
At user specified
target offset voltage
Total Input Offset Voltage 4
VOST
50
100
50
150
µV
At user specified
target offset voltage
Input Offset Current 5
IOS
10
0.01
35
±7
100
±15
0.01
50
±0.7
±4
240
Input Bias Current 5
IB
Input Voltage Range 6
VIR
Input Resistance
RIN
Input Offset Voltage Drift 7
Initial Power Supply
0.01
-0.3
-2.8
10
240
5.3
+2.8
0.01
-0.3
-2.8
10 14
1014
TCVOS
7
7
PSRR i
90
Initial Common Mode
Rejection Ratio 8
CMRR i
90
Large Signal Voltage Gain
AV
VO low
VO high
4.99
0.001
4.999
0.01
Output Voltage Range
VO low
VO high
-2.48
2.48
-2.40
2.40
mV
10
pA
240
pA
TA = 25°C
0°C ≤ TA ≤ +70°C
10
240
pA
pA
TA = 25°C
0°C ≤ TA ≤ +70°C
5.3
+2.8
V
V
V+ = +5V
VS = ±2.5V
Ω
µV/°C
RS ≤ 100KΩ
90
dB
RS ≤ 100KΩ
90
dB
RS ≤ 100KΩ
V/mV
V/mV
RL =100KΩ
0°C ≤ TA ≤ +70°C
Rejection Ratio 8
Output Short Circuit Current
ISC
15
10
100
15
10
100
0.001
4.999
0.01
4.99
V
V
R L =1MΩ V =5V
0°C ≤ TA ≤ +70°C
-2.48
2.48
-2.40
2.40
V
V
R L =100KΩ
0°C ≤ TA ≤ +70°C
200
200
µA
* NOTES 1 through 9, see section titled "Definitions and Design Notes".
ALD2726E/ALD2726
Advanced Linear Devices
3
OPERATING ELECTRICAL CHARACTERISTICS (cont'd)
TA = 25 oC V S = ±2.5V unless otherwise specified
Min
2726E
Typ
Max
50
80
Min
2726
Typ
Max
50
80
µA
VIN = 0V
No Load
400
µW
VS = ±2.5V
Parameter
Symbol
Supply Current
IS
Power Dissipation
PD
Input Capacitance
CIN
1
1
pF
Maximum Load Capacitance
CL
25
25
pF
Equivalent Input Noise Voltage
en
55
55
nV/√Hz
f = 1KHz
Equivalent Input Noise Current
in
0.6
0.6
fA/√Hz
f =10Hz
Bandwidth
BW
200
200
KHz
Slew Rate
SR
0.1
0.1
V/µs
AV = +1
RL = 100KΩ
Rise time
tr
1.0
1.0
µs
RL = 100KΩ
20
20
%
RL =100KΩ
CL =25pF
400
Overshoot Factor
Unit
Test Conditions
Settling Time
tS
10
10
µs
0.1% AV = -1
RL = 100KΩ
CL = 25pF
Channel Separation
CS
140
140
dB
AV =100
TA = 25oC VS = ±2.5V unless otherwise specified
2726E
Parameter
Symbol
Average Long Term Input Offset
Voltage Stability 9
∆ VOS
∆ time
Initial VE Voltage
VE1 i, VE2 i
Programmable Change of
∆VE1, ∆VE2
Min
Typ
2726
Max
Min
Typ
Max
Unit
µV/
1000 hrs
0.02
0.02
1.5
1.8
V
1.0
0.5
V
0.1
0.1
%
-5
-5
µA
0.5
Test Conditions
VE Range
Programmed VE Voltage Error
e(VE1-VE2)
VE Pin Leakage Current
ieb
* NOTES 1 through 9, see section titled "Definitions and Design Notes".
4
Advanced Linear Devices
ALD2726E/ALD2726
V S = ±2.5V -55°C ≤ TA ≤ +125°C unless otherwise specified
2726E
Min
Typ
2726
Parameter
Symbol
Max
Min
Initial Input offset Voltage
VOS i
Input Offset Current
IOS
2.0
2.0
nA
Input Bias Current
IB
2.0
2.0
nA
Initial Power Supply
Rejection Ratio 8
PSRR i
85
85
dB
RS ≤ 100KΩ
Initial Common Mode
Rejection Ratio 8
CMRR i
83
83
dB
RS ≤ 100KΩ
Large Signal Voltage Gain
AV
10
50
V/mV
RL = 1MΩ
Output Voltage Range
VO low
VO high
2.25
V
V
R L = 1MΩ
Unit
Test Conditions
0.7
Max
0.7
50
-2.40
2.40
Typ
10
-2.25
2.25
-2.40
2.40
-2.25
Unit
Test Conditions
mV
RS ≤ 100KΩ
TA = 25 oC V S = ±1.0V unless otherwise specified
2726E
Symbol
Initial Power Supply
Rejection Ratio 8
PSRR i
80
80
dB
RS ≤ 100KΩ
Initial Common Mode
CMRRi
80
80
dB
RS ≤ 100KΩ
Large Signal Voltage Gain
AV
50
50
V/mV
RL = 1MΩ
Output Voltage Range
VO low
VO high
V
R L = 1MΩ
Rejection Ratio
Min
Typ
2726
Parameter
Max
Min
Typ
Max
8
0.9
-0.95
0.95
-0.9
0.9
-0.95
0.95
-0.9
Bandwidth
BW
0.2
0.2
MHz
Slew Rate
SR
0.1
0.1
V/µs
ALD2726E/ALD2726
Advanced Linear Devices
AV = +1, CL = 25pF
5
TYPICAL PERFORMANCE CHARACTERISTICS
OUTPUT VOLTAGE SWING AS A FUNCTION
OF SUPPLY VOLTAGE
1000
±25°C ≤ TA ≤ +125°C
RL = 100KΩ
±5
OPEN LOOP VOLTAGE
GAIN (V/mV)
OUTPUT VOLTAGE SWING (V)
±6
OPEN LOOP VOLTAGE GAIN AS A FUNCTION
OF SUPPLY VOLTAGE AND TEMPERATURE
±4
±3
±2
±1
100
10
±55°C ≤ TA ≤ +125°C
RL = 100KΩ
1
±1
0
±2
±3
±4
±5
±6
±7
±2
0
±4
±8
±6
SUPPLY VOLTAGE (V)
SUPPLY VOLTAGE (V)
INPUT BIAS CURRENT AS A FUNCTION
OF AMBIENT TEMPERATURE
SUPPLY CURRENT AS A FUNCTION
OF SUPPLY VOLTAGE
VS = ±2.5V
100
SUPPLY CURRENT (µA)
INPUT BIAS CURRENT (pA)
1000
10
1.0
0.1
INPUTS GROUNDED
OUTPUT UNLOADED
160
+25°C
-25°C
TA = -55°C
120
80
40
+70°C
0.01
0
AMBIENT TEMPERATURE (°C)
±2
±3
±4
SUPPLY VOLTAGE (V)
ADJUSTMENT IN INPUT OFFSET VOLTAGE
AS A FUNCTION OF CHANGE IN VE1 AND VE2
OPEN LOOP VOLTAGE GAIN AS
A FUNCTION OF FREQUENCY
-25
0
25
50
75
100
125
0
±1
±5
±6
120
6
OPEN LOOP VOLTAGE
GAIN (dB)
10
8
VE1
4
2
0
-2
-4
-6
-8
VE2
-10
VS = ±2.5V
TA = 25°C
100
80
60
0
40
45
20
90
0
135
180
-20
0.0
0.25
0.5
0.75
1.0
1.25
1.50
CHANGE IN VE1 AND VE2 (V)
Advanced Linear Devices
1
10
100
1K
10K 100K
FREQUENCY (Hz)
1M
PHASE SHIFT IN DEGREES
CHANGE IN INPUT OFFSET
VOLTAGE ∆VOS (mV)
-50
6
+125°C
10M
ALD2726E/ALD2726
TYPICAL PERFORMANCE CHARACTERISTICS
COMMON MODE INPUT VOLTAGE RANGE
AS A FUNCTION OF SUPPLY VOLTAGE
LARGE - SIGNAL TRANSIENT
RESPONSE
±7
COMMON MODE INPUT
VOLTAGE RANGE (V)
±6
2V/div
VS = ±1.0V
TA = 25°C
RL = 100KΩ
CL= 25pF
500mV/div
10µs/div
TA = 25°C
±5
±4
±3
±2
±1
0
0
±1
±2
±3
±4
±5
±6
±7
SUPPLY VOLTAGE (V)
SMALL - SIGNAL TRANSIENT
RESPONSE
OPEN LOOP VOLTAGE GAIN AS A
FUNCTION OF LOAD RESISTANCE
1000
VS = ±2.5V
TA = 25°C
RL = 100KΩ
CL= 25pF
OPEN LOOP VOLTAGE
GAIN (V/mV)
100mV/div
100
10
VS = ±2.5V
TA = 25°C
1
10K
100K
1M
50mV/div
10µs/div
10M
LOAD RESISTANCE (Ω)
LARGE - SIGNAL TRANSIENT
RESPONSE
VS = ±2.5V
TA = 25°C
RL = 100KΩ
CL= 25pF
100
PERCENTAGE OF UNITS (%)
5V/div
DISTRIBUTION OF TOTAL INPUT OFFSET VOLTAGE
BEFORE AND AFTER EPAD PROGRAMMING
80
EXAMPLE A:
VOST AFTER EPAD
PROGRAMMING
VOST TARGET = 0.0µV
EXAMPLE B:
VOST AFTER EPAD
PROGRAMMING
VOST TARGET = -750µV
60
VOST BEFORE EPAD
PROGRAMMING
40
20
2V/div
10µs/div
0
-2500
-2000
-1500
-1000
-500
0
500
1000
1500
2000
2500
TOTAL INPUT OFFSET VOLTAGE (µV)
ALD2726E/ALD2726
Advanced Linear Devices
7
EQUIVALENT INPUT OFFSET VOLTAGE DUE TO
CHANGE IN SUPPLY VOLTAGE (µV)
TWO EXAMPLES OF EQUIVALENT INPUT OFFSET VOLTAGE DUE TO
CHANGE IN SUPPLY VOLTAGE vs. SUPPLY VOLTAGE
500
PSRR = 80 dB
400
EXAMPLE A:
VOS EPAD PROGRAMMED
AT VSUPPLY = +5V
300
EXAMPLE B:
VOS EPAD
PROGRAMMED
AT VSUPPLY = +8V
200
100
0
1
0
2
3
4
5
6
7
8
9
10
EQUIVALENT INPUT OFFSET VOLTAGE DUE TO
CHANGE IN COMMON MODE VOLTAGE (µV)
SUPPLY VOLTAGE (V)
THREE EXAMPLES OF EQUIVALENT INPUT OFFSET VOLTAGE DUE TO
CHANGE IN COMMON MODE VOLTAGE vs. COMMON MODE VOLTAGE
500
VSUPPLY = ±5V
CMRR = 80dB
400
300
EXAMPLE B:
VOS EPAD
PROGRAMMED
AT VIN = -4.3V
200
EXAMPLE A:
VOS EPAD PROGRAMMED
AT VIN = 0V
100
EXAMPLE C:
VOS EPAD PROGRAMMED
AT VIN = +5V
0
-5
-4
-3
-2
-1
0
1
2
3
4
5
EQUIVALENT INPUT OFFSET VOLTAGE DUE TO
CHANGE IN COMMON MODE VOLTAGE (µV)
COMMON MODE VOLTAGE (V)
EXAMPLE OF MINIMIZING EQUIVALENT INPUT OFFSET VOLTAGE
FOR A COMMON MODE VOLTAGE RANGE OF 0.5V
50
COMMON MODE VOLTAGE RANGE OF 0.5V
40
30
VOS EPAD
PROGRAMMED
AT COMMON MODE
VOLTAGE OF 0.25V
20
CMRR = 80dB
10
0
-0.5
-0.4
-0.3
-0.2
-0.1
0.0
0.1
0.2
0.3
0.4
0.5
COMMON MODE VOLTAGE (V)
8
Advanced Linear Devices
ALD2726E/ALD2726
APPLICATION SPECIFIC / IN-SYSTEM PROGRAMMING
2500
2500
2000
2000
TOTAL INPUT OFFSET VOLTAGE (µV)
TOTAL INPUT OFFSET VOLTAGE (µV)
Examples of applications where accumulated total input offset voltage from various
contributing sources is minimized under different sets of user-specified operating conditions
1500
1000
VOS BUDGET AFTER
EPAD PROGRAMMING
500
0
-500
+
X
-1000
-1500
-2000
VOS BUDGET BEFORE
EPAD PROGRAMMING
1500
VOS BUDGET AFTER
EPAD PROGRAMMING
1000
500
+
0
X
-500
-1000
-1500
VOS BUDGET BEFORE
EPAD PROGRAMMING
-2000
-2500
-2500
EXAMPLE B
2500
2500
2000
2000
TOTAL INPUT OFFSET VOLTAGE (µV)
TOTAL INPUT OFFSET VOLTAGE (µV)
EXAMPLE A
1500
1000
VOS BUDGET BEFORE
EPAD PROGRAMMING
500
0
-500
-1000
+
X
-1500
-2000
VOS BUDGET AFTER
EPAD PROGRAMMING
1500
1000
500
+
0
X
-500
-1000
-1500
-2000
-2500
VOS BUDGET AFTER
EPAD PROGRAMMING
VOS BUDGET BEFORE
EPAD PROGRAMMING
-2500
EXAMPLE C
EXAMPLE D
Device input VOS
PSRR equivalent VOS
+
Total Input VOS
after EPAD
Programming
CMRR equivalent VOS
TA equivalent VOS
X
Noise equivalent VOS
External Error equivalent VOS
ALD2726E/ALD2726
Advanced Linear Devices
9
DEFINITIONS AND DESIGN NOTES:
ADDITIONAL DESIGN NOTES:
1. Initial Input Offset Voltage is the initial offset voltage of the
ALD2726E/ALD2726 operational amplifier when shipped from
the factory. The device has been pre-programmed and tested
for programmability.
A. The ALD2726E/ALD2726 is internally compensated for
unity gain stability using a novel scheme which produces a
single pole role off in the gain characteristics while providing
more than 60 degrees of phase margin at unity gain frequency.
A unity gain buffer using the ALD2726E/ALD2726 will typically
drive 25pF of external load capacitance.
2. Offset Voltage Program Range is the range of adjustment of
user specified target offset voltage. This is typically an adjustment in either the positive or the negative direction of the input
offset voltage from an initial input offset voltage. The input
offset programming pins, VE1A/VE1B or VE2A/VE2B change
the input offset voltages in thepositive or negative direction, for
each of the amplifier A or B, respectively. User specified target
offset voltage can be any offset voltage within this programming
range.
3. Programmed Input Offset Voltage Error is the final offset
voltage error after programming when the Input Offset Voltage
is at target Offset Voltage. This parameter is sample tested.
4. Total Input Offset Voltage is the same as Programmed Input
Offset Voltage, corrected for system offset voltage error. Usually this is an all inclusive system offset voltage, which also
includes offset voltage contributions from input offset voltage,
PSRR, CMRR, TCVOS and noise. It can also include errors
introduced by external components, at a system level. Programmed Input Offset Voltage and Total Input Offset Voltage is
not necessarily zero offset voltage, but an offset voltage set to
compensate for other system errors as well. This parameter is
sample tested.
5. The Input Offset and Bias Currents are essentially input
protection diode reverse bias leakage currents. This low input
bias current assures that the analog signal from the source will
not be distorted by it. For applications where source impedance
is very high, it may be necessary to limit noise and hum pickup
through proper shielding.
6. Input Voltage Range is determined by two parallel complementary input stages that are summed internally, each stage
having a separate input offset voltage. While Total Input Offset
Voltage can be trimmed to a desired target value, it is essential
to note that this trimming occurs at only one user selected input
bias voltage. Depending on the selected input bias voltage
relative to the power supply voltages, offset voltage trimming
may affect one or both input stages. For the ALD2726E/
ALD2726, the switching point between the two stages occur at
approximately 1.5V below positive supply voltage.
7. Input Offset Voltage Drift is the average change in Total Input
Offset Voltage as a function of ambient temperature. This
parameter is sample tested.
8. Initial PSRR and initial CMRR specifications are provided as
reference information. After programming, error contribution to
the offset voltage from PSRR and CMRR is set to zero under the
specific power supply and common mode conditions, and
becomes part of the Programmed Input Offset Voltage Error.
9. Average Long Term Input Offset Voltage Stability is based on
input offset voltage shift through operating life test at 125°C
extrapolated to TA = 25 °C, assuming activation energy of
1.0eV. This parameter is sample tested.
10
B. The ALD2726E/ALD2726 has complementary p-channel
and n-channel input differential stages connected in parallel to
accomplish rail-to-rail input common mode voltage range. The
switching point between the two differential stages is 1.5V below
positive supply voltage. For applications such as inverting
amplifier or non-inverting amplifier with a gain larger than 2.5
(5V operation), the common mode voltage does not make
excursions below this switching point. However, this switching
does take place if the operational amplifier is connected as a railto-rail unity gain buffer and the design must allow for input offset
voltage variations.
C. The output stage consists of class AB complementary output
drivers. The oscillation resistant feature, combined with the railto-rail input and output feature, makes the ALD2726E/
ALD2726 an effective analog signal buffer for high source
impedance sensors, transducers, and other circuit networks.
D. The ALD2726E/ALD2726 has static discharge protection.
Care must be exercised when handling the device to avoid
strong static fields that may degrade a diode junction, causing
increased input leakage currents. The user is advised to power
up the circuit before, or simultaneously with, any input voltages
applied and to limit input voltages not to exceed 0.3V of the
power supply voltage levels.
E. VExx are high impedance terminals, as the internal bias
currents are set very low to a few microamperes to conserve
power. For some applications, these terminals may need to be
shielded from external coupling sources. For example, digital
signals running nearby may cause unwanted offset voltage
fluctuations. Care during the printed circuit board layout to place
ground traces around these pins and to isolate them from digital
lines will generally eliminate such coupling effects. In addition,
optional decoupling capacitors of 1000pF or greater value can
be added to VExx terminals.
F. The ALD2726E/ALD2726is designed for use in low voltage,
micropower circuits. The maximum operating voltage during
normal operation should remain below 10 Volts at all times. Care
should be taken to insure that the application in which the device
is used do not experience any positive or negative transient
voltages that will cause any of the terminal voltages to exceed
this limit.
G. All inputs or unused pins except VExx pins should be
connected to a supply voltage such as Ground so that they do
not become floating pins, since input impedance at these pins
is very high. If any of these pins are left undefined, they may
cause unwanted oscillation or intermittent excessive current
drain. As these devices are built with CMOS technology, normal
operating and storage temperature limits, ESD and latchup
handling precautions pertaining to CMOS device handling
should be observed.
Advanced Linear Devices
ALD2726E/ALD2726