New Product V10150C, VF10150C, VB10150C & VI10150C Vishay General Semiconductor High-Voltage Trench MOS Barrier Schottky Rectifier Ultra Low VF = 0.63 V at IF = 3 A FEATURES TMBS ® TO-220AB • Trench MOS Schottky technology ITO-220AB • Low forward voltage drop, low power losses • High efficiency operation 2 3 V10150C 2 1 1 • Meets MSL level 1, per J-STD-020, LF maximum peak of 245 °C (for TO-263AB package) 3 • Solder bath temperature 275 °C maximum, 10 s, per JESD 22-B106 (for TO-220AB, ITO-220AB and TO-262AA package) VF10150C PIN 1 PIN 2 PIN 1 PIN 3 CASE PIN 3 TO-263AB PIN 2 • Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC TO-262AA K K TYPICAL APPLICATIONS For use in high frequency converters, switching power supplies, freewheeling diodes, OR-ing diode, dc-to-dc converters and reverse battery protection. 2 1 1 VB10150C PIN 1 3 MECHANICAL DATA VI10150C K PIN 2 2 HEATSINK PIN 1 PIN 2 PIN 3 K Case: TO-220AB, ITO-220AB, TO-263AB and TO-262AA Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant, commercial grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test Polarity: As marked Mounting Torque: 10 in-lbs maximum PRIMARY CHARACTERISTICS IF(AV) 2 x 5.0 A VRRM 150 V IFSM 60 A VF at IF = 5 A 0.69 V TJ max. 150 °C MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Maximum repetitive peak reverse voltage V10150C VF10150C VB10150C VI10150C UNIT VRRM 150 V IF(AV) 10 5.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load per diode IFSM 60 A Non-repetitive avalanche energy at TJ = 25 °C, L = 60 mH per diode EAS 23 mJ Peak repetitive reverse current at tp = 2 µs, 1 kHz, TJ = 38 °C ± 2 °C per diode IRRM 0.5 A Voltage rate of change (rated VR) dV/dt 10 000 V/µs Isolation voltage (ITO-220AB only) from terminal to heatsink t = 1 min VAC 1500 V TJ, TSTG - 55 to + 150 °C Maximum average forward rectified current (fig. 1) Operating junction and storage temperature range Document Number: 89068 Revision: 24-Jun-09 per device per diode For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 New Product V10150C, VF10150C, VB10150C & VI10150C Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS IR = 1.0 mA Breakdown voltage Instantaneous forward voltage per diode (1) SYMBOL TYP. VBR TA = 25 °C MAX. UNIT 150 (minimum) - V 0.82 0.99 1.41 IF = 3 A IF = 5 A TA = 25 °C IF = 3 A IF = 5 A TA = 125 °C 0.63 0.69 0.75 VR = 100 V TA = 25 °C TA = 125 °C 0.5 0.5 - µA mA VR = 150 V TA = 25 °C TA = 125 °C 1.0 100 10 µA mA Reverse current per diode (2) V VF IR Notes (1) (2) Pulse test: 300 µs pulse width, 1 % duty cycle Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER Typical thermal resistance per diode SYMBOL V10150C VF10150C VB10150C VI10150C UNIT RθJC 4.0 6.5 4.0 4.0 °C/W ORDERING INFORMATION (Example) PACKAGE UNIT WEIGHT (g) PACKAGE CODE BASE QUANTITY DELIVERY MODE TO-220AB V10150C-E3/4W PREFERRED P/N 1.87 4W 50/tube Tube ITO-220AB VF10150C-E3/4W 1.74 4W 50/tube Tube TO-263AB VB10150C-E3/4W 1.39 4W 50/tube Tube TO-263AB VB10150C-E3/8W 1.38 8W 800/reel Tape and reel TO-262AA VI10150C-E3/4W 1.45 4W 50/tube Tube RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 5 Resistive or Inductive Load D = 0.5 V(B,I)10150C 10 Average Power Loss (W) Average Forward Rectified Current (A) 12 8 VF10150C 6 4 2 D = 0.8 D = 0.3 4 D = 0.2 3 D = 1.0 D = 0.1 2 T 1 Mounted on Specific Heatsink D = tp/T tp 4 5 0 0 0 25 50 75 100 125 150 175 0 1 2 3 6 Case Temperature (°C) Average Forward Current (A) Figure 1. Maximum Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics Per Diode www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 89068 Revision: 24-Jun-09 New Product V10150C, VF10150C, VB10150C & VI10150C Vishay General Semiconductor 10 Transient Thermal Impedance (°C/W) Instantaneous Forward Current (A) 100 TA = 150 °C 10 TA = 125 °C TA = 100 °C 1 TA = 25 °C 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 Junction to Case V(B,I)10150C 1 0.01 1.6 0.1 1 10 100 Instantaneous Forward Voltage (V) t - Pulse Duration (s) Figure 3. Typical Instantaneous Forward Characteristics Per Diode Figure 6. Typical Transient Thermal Impedance Per Diode 10 1 Transient Thermal Impedance (°C/W) Instantaneous Reverse Current (mA) 10 TA = 150 °C TA = 125 °C 0.1 TA = 100 °C 0.01 0.001 TA = 25 °C 0.0001 0.00001 10 20 30 40 50 60 70 80 90 100 Junction to Case VF10150C 1 0.01 0.1 1 10 100 Percent of Rated Peak Reverse Voltage (%) t - Pulse Duration (s) Figure 4. Typical Reverse Characteristics Per Diode Figure 7. Typical Transient Thermal Impedance Per Diode Junction Capacitance (pF) 10 000 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 1000 100 10 0.1 1 10 100 Reverse Voltage (V) Figure 5. Typical Junction Capacitance Per Diode Document Number: 89068 Revision: 24-Jun-09 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 New Product V10150C, VF10150C, VB10150C & VI10150C Vishay General Semiconductor PACKAGE OUTLINE DIMENSIONS in inches (millimeters) TO-220AB ITO-220AB 0.370 (9.40) 0.360 (9.14) 0.185 (4.70) 0.175 (4.44) 0.154 (3.91) 0.148 (3.74) PIN 2 3 0.160 (4.06) 0.140 (3.56) 0.350 (8.89) 0.330 (8.38) 1.148 (29.16) 1.118 (28.40) 0.105 (2.67) 0.095 (2.41) 0.104 (2.65) 0.096 (2.45) 2 0.135 (3.43) DIA. 0.122 (3.08) DIA. 7° REF. 0.350 (8.89) 0.330 (8.38) 3 7° REF. 0.191 (4.85) 0.171 (4.35) 0.560 (14.22) 0.530 (13.46) 0.560 (14.22) 0.530 (13.46) 0.035 (0.89) 0.025 (0.64) 0.025 (0.64) 0.015 (0.38) 0.105 (2.67) 0.095 (2.41) 0.022 (0.56) 0.014 (0.36) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.057 (1.45) 0.045 (1.14) 0.035 (0.90) 0.028 (0.70) 0.205 (5.20) 0.195 (4.95) 0.671 (17.04) 0.651 (16.54) PIN 1 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) 0.140 (3.56) DIA. 0.125 (3.17) DIA. 0.600 (15.24) 0.580 (14.73) 0.603 (15.32) 0.573 (14.55) 7° REF. 0.076 (1.93) REF. 45° REF. 0.145 (3.68) 0.135 (3.43) 0.635 (16.13) 0.625 (15.87) 0.110 (2.79) 0.100 (2.54) 0.076 (1.93) REF. 0.055 (1.39) 0.045 (1.14) 0.113 (2.87) 0.103 (2.62) 1 0.190 (4.83) 0.170 (4.32) 0.404 (10.26) 0.384 (9.75) 0.415 (10.54) MAX. 0.028 (0.71) 0.020 (0.51) 0.205 (5.21) 0.195 (4.95) TO-262AA 0.185 (4.70) 0.175 (4.44) 0.411 (10.45) MAX. 0.250 (6.35) MIN. 30° (TYP.) (REF.) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) K 0.950 (24.13) 0.920 (23.37) 1 PIN 2 0.350 (8.89) 0.330 (8.38) 0.510 (12.95) 0.470 (11.94) 0.401 (10.19) 0.381 (9.68) 3 0.160 (4.06) 0.140 (3.56) 0.110 (2.79) 0.100 (2.54) 0.057 (1.45) 0.045 (1.14) PIN 1 PIN 2 PIN 3 HEATSINK 0.560 (14.22) 0.530 (13.46) 0.035 (0.90) 0.028 (0.70) 0.104 (2.65) 0.096 (2.45) 0.022 (0.56) 0.014 (0.35) 0.205 (5.20) 0.195 (4.95) TO-263AB 0.41 1 (10.45) 0.380 (9.65) 0.190 (4.83) 0.160 (4.06) 0.245 (6.22) MIN K 0.360 (9.14) 0.320 (8.13) 1 K 2 0.624 (15.85) 0.591(15.00) 0.055 (1.40) 0.045 (1.14) 0 to 0.01 (0 to 0.254) 0.105 (2.67) 0.095 (2.41) www.vishay.com 4 0.205 (5.20) 0.195 (4.95) 0.42 MIN. (10.66) 0.33 (8.38) MIN. 0.055 (1.40) 0.047 (1.19) 0.110 (2.79) 0.090 (2.29) 0.021 (0.53) 0.014 (0.36) 0.037 (0.940) 0.027 (0.686) Mounting Pad Layout 0.140 (3.56) 0.110 (2.79) 0.670 (17.02) 0.591 (15.00) 0.15 (3.81) MIN. 0.08 MIN. (2.032) 0.105 (2.67) (0.095) (2.41) For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 89068 Revision: 24-Jun-09 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1