LAMINATE data sheet MCM-PBGA Features: MCM-PBGA Packages: The MCM-PBGA (Multi-Chip Module Plastic Ball Grid Array) by Amkor incorporates the latest technology in high-density plastic IC packaging. The high-speed performance and thermal advantages of the PBGA package provide the platform to mix semiconductor technologies such as analog, digital, bipolar, CMOS, ASIC, memory, etc., in a single IC package. The affordability of our MCM-PBGAs enable systems designers to realize their vision of new, advanced or improved applications. Our designs are optimized to use standard PBGA package outline tooling to save you costs and utilize a proven BGA infrastructure. Additionally, we work with you to produce the most efficient substrate circuit design that will enhance the operation and performance of your IC chips. Our advanced in-house design center and electrical test support services complete the turn-key solution. Applications: Amkor’s MCM-PBGA is an excellent platform for reducing form factor and size while combining semiconductor technologies. MCM-PBGAs are perfect for any application where size, weight, electrical performance, board density and SMT yields are important considerations, such as ASICs, cable and DSL modems, wireless telecommunications and electronic automotive components. Thermal Performance: Reliability: Innovative designs and expanding package offerings provide a platform from prototype-to-production. • Ball counts up to 1156 • 13.0 mm to 40.0 mm body sizes • 1.00, 1.27 & 1.50 mm ball pitch available • Perimeter, stagger and full ball arrays • Special packaging for memory available • 2, 4, or 6 layer construction, ground / power • Full in-house design capability • JEDEC MS-034 standard outlines • MCM under high volume manufacturing in all sites • Enhanced electrical performance, shorter signal paths and reduced package parasitics • 2-8 active devices • 200-600 wire bonds • Passives can be added by utilizing the SMT equipment located in the SiP line Multi layer PCB, 0 air flow Pkg Body Size PCB Layer Cu Thickness Theta JA (°C/W) 272 388 27.0 x 27.0 35.0 x 35.0 4 4 36 µm 36 µm 19 16 Amkor assures you reliable performance by continuously monitoring key indices: • Moisture sensitivity characterization • High temp op life • High temp storage • Autoclave or unbiased hast • Temp cycle JEDEC Level 3 30 °C/60% RH/192 hours 125 °C, 6V, 1000 hours 150 °C, 1000 hours 130 °C/85% RH/96 hours -55/+125 °C, 1000 cycles VISIT AMKOR TECHNOLOGY ONLINE FOR LOCATIONS AND TO VIEW THE MOST CURRENT PRODUCT INFORMATION . www.amkor.com DS 540G Rev Date: 05 ‘07 LAMINATE data sheet MCM-PBGA MCM-PBGA Cross Section Process Highlights Die Thickness (max) 13 mils Bond Pad Pitch (min) 2.4 mils Marking Laser Ball Inspection Optical Pack/Ship Options Dry Pack Wafer Backgrinding Available PBGA Standard Package Offering (mm) BODY SIZE 13.0 x 13.0 14.0 x 22.0 15.0 x 15.0 17.0 x 17.0 19.0 x 19.0 23.0 x 23.0 27.0 x 27.0 31.0 x 31.0 35.0 x 35.0 37.5 x 37.5 40.0 x 40.0 BALL COUNT BALL PITCH BALL MATRIX 144 119 153 121 156/160 196 192/208 256 240 289 324 169 208/217 240/249 289 288/324 484 225 256/272 300/316 356 400 416 676 304/329 360/385 529 516 900 313 352/388 420/456 452 676 580 680 1,156 524 784 564 900 1.0 1.27 1.27 1.27 1.00 1.00 1.00 1.00 1.00 1.00 1.00 1.50 1.27 1.27 1.27 1.00 1.00 1.50 1.27 1.27 1.27 1.27 1.00 1.00 1.27 1.27 1.27 1.00 1.00 1.27 1.27 1.27 1.27 1.27 1.00 1.00 1.00 1.27 1.27 1.27 1.27 12 x 12 F 7 x 17 F 9 x 17 F 11 x 11 F 14 x 14 P 14 x 14 F 16 x 16 P 16 x 16 F 18 x 18 P 17 x 17 P 18 x 18 P 13 x 13 F 17 x 17 P 17 x 17 P 17 x 17 F 22 x 22 P 22 x 22 F 15 x 15 F 20 x 20 P 20 x 20 P 20 x 20 P 20 x 20 F 26 x 26 P 26 x 26 F 23 x 23 P 23 x 23 P 23 x 23 F 30 x 30 P 30 x 30 F 25 x 25 S 26 x 26 P 26 x 26 P 26 x 26 P 26 x 26 F 34 x 34 P 34 x 34 P 34 x 34 F 28 x 28 P 28 x 28 F 30 x 30 P 30 x 30 F BALL DIAM. 0.51 0.76 0.76 0.76 0.51 0.51 0.51 0.51 0.51 0.51 0.51 0.76 0.76 0.76 0.76 0.63 0.63 0.76 0.76 0.76 0.76 0.76 0.63 0.63 0.76 0.76 0.76 0.63 0.63 0.76 0.76 0.76 0.76 0.76 0.63 0.63 0.63 0.76 0.76 0.76 0.76 PCB THICKNESS 2 LYR 4 LYR 0.36 0.56 0.56 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 0.36 N/A 0.36 0.36 0.36 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 N/A 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.61 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.61 0.56 0.56 0.56 0.56 0.56 0.56 0.56 0.56 MOLD CAP THK 0.80 0.90 0.90 1.17 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 1.17 TOTAL PACKAGE THICKNESS 2 LYR 4LYR 1.56 2.06 2.06 2.13 1.56 1.56 1.56 1.56 1.56 1.56 1.56 2.13 2.13 2.13 2.13 2.03 2.03 2.13 2.13 2.13 N/A 2.13 2.03 2.03 2.33 2.33 2.33 2.23 2.23 2.33 2.33 2.33 N/A 2.33 2.23 2.23 2.23 2.33 2.33 2.33 2.33 1.76 2.06 2.06 2.33 1.76 1.76 1.76 1.76 1.76 1.76 1.76 2.33 2.33 2.33 2.33 2.23 2.23 2.33 2.33 2.33 2.38 2.33 2.23 2.23 2.33 2.33 2.33 2.23 2.23 2.33 2.33 2.33 2.38 2.33 2.23 2.23 2.23 2.33 2.33 2.33 2.33 Standard Materials Package substrate CCL-HL832 Die attach Ablestik 2300 Au wire 25 µm or 30 µm Mold compound Nitto GE 100L Solder Balls 63 Sn / 37 Pb Test Services Program Generation/Conversion Product Engineering Wafer sort 256 Pin x 20 mhz Test System available -55 °C to + 125 °C Test available Tape and Reel Services Burn-in Shipping Low Profile Tray (JEDEC Outline CO-029) NOTE: All measurements in mm. P = Perimeter F = Full Array S = Stagger = Maximum possible ball count (may not be tooled). Additional depopulated options are available. Contact account manager for additional tooling. www.amkor.com With respect to the information in this document, Amkor makes no guarantee or warranty of its accuracy or that the use of such information will not infringe upon the intellectual rights of third parties. Amkor shall not be responsible for any loss or damage of whatever nature resulting from the use of, or reliance upon it and no patent or other license is implied hereby. This document does not in any way extend or modify Amkor’s warranty on any product beyond that set forth in its standard terms and conditions of sale. Amkor reserves the right to make changes in its product and specifications at any time and without notice.