Model A20A50X1A RoHS Compliant Surface mount Termination 20 Watts, 50Ω General Specifications Resistive Element Substrate Terminal Finish Operating Temperature Thick film Alumina Ceramic Thick film Silver -55 to +125°C (see chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications • Surface Mountable Resistance Value: Power: Frequency Range: V.S.W.R.: • Alumina Ceramic Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change without notice Features: • 20 Watts 50 ohms, ± 2% 20 Watts DC – 6.0 GHz 1.25:1 • Non-Nichrome Resistive Element • Low VSWR • 100% Tested • RoHS Compliant Outline Drawing A20A50X1A (097) Rev B Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model A20A50X1A RoHS Compliant Typical Performance: Derating: Mounting Footprint and Procedure: A20A50X1A (097) Rev B USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.