Model A40B50X1B RoHS Compliant Chip Termination 40 Watts, 50Ω General Specifications Resistive Element Substrate Terminal Finish Operating Temperature Thick film Beryllium oxide ceramic Thick film Silver -55 to +150°C (see chart) Tolerance is ±0.010”, unless otherwise specified. Designed to meet of exceed applicable portions of MIL-E-5400. All dimensions in inches. Electrical Specifications Features: • 40 Watts • Surface Mountable Resistance Value: Power: Frequency Range: V.S.W.R.: 50 ohms, ± 2% 40 Watts DC – 2.0 GHz 1.30:1 Specification based on unit properly installed using suggested mounting instructions and a 50 ohm nominal impedance. Specifications subject to change without notice • BeO Ceramic • Non-Nichrome Resistive Element • Low VSWR • 100% Tested • RoHS Compliant Outline Drawing A40B50X1B (097) Rev B Available on Tape and Reel For Pick and Place Manufacturing. USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Model A40B50X1B RoHS Compliant Typical Performance: Power De-rating: Mounting Procedure: A40B50X1B (097) Rev B USA/Canada: Toll Free: Europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 Available on Tape and Reel For Pick and Place Manufacturing.