SMT06C Series 5 Vin and 12 Vin single output DC-DC CONVERTERS • • • • • • • • C Class Non-isolated 1 NEW Product 6 A current rating Input voltage range: 4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc Output voltage range: 0.9 Vdc to 3.3/5.0 Vdc Industry leading value • Cost optimized design Excellent transient response Output voltage adjustability • Pathway for future upgrades • Supports silicon voltage migration • Resulting in reduced design-in and qualification time Designed in reliability: MTBF of >7 million hours per Telcordia SR-332 Available RoHS compliant The SMT06C series is a new high density open-frame, non-isolated converter for space sensitive applications. Each model has a wide input range (4.5 Vdc to 5.5 Vdc or 10.2 Vdc to 13.8 Vdc) and offers a wide 0.9 Vdc to 5.0 Vdc output voltage range with a 6 A load. An external resistor adjusts the output voltage from its pre-set value of 0.9 V to any value up to the 5 V maximum. Typical efficiencies for the models are 89% for the 5 V input version and 91% for the 12 V input version. The series offers remote ON/OFF and overcurrent protection as standard. With full international safety approvals including EN60950 and Ul/cUL60950, the SMT06C reduces compliance costs and time to market. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input Vin = 12 V, full load at 25 °C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability (See Note 6) INPUT SPECIFICATIONS (CONTD.) 5 Vin 12 Vin 0.9-3.3 Vdc 0.9-5.0 Vdc Output setpoint accuracy 1.0% trim resistors ±2.5% Line regulation Low line to high line ±0.2% Load regulation Full load to min. load ±0.5% Min/max load 0 A/6 A Overshoot (at turn-on) 5 Vin 12 Vin Undershoot At turn-off Ripple and noise 5 Hz to 20 MHz (See Note 2) 3.0% max. 1.0% max. 100 mV max. See Table on page 2 5 Vin 12 Vin 4.5 Vdc typ. 9.3 Vdc typ. Turn OFF threshold 5 Vin 12 Vin 4.3 Vdc typ. 7.8 Vdc typ. GENERAL SPECIFICATIONS Efficiency See Table on page 2 Switching frequency Fixed 200 kHz Approvals and standards (See Note 4) TÜV Product Services IEC60950, UL/cUL60950 Material flammability UL94V-0 Weight Transient response (See Note 1) 75 mV max. deviation 150 µs recovery to within regulation band INPUT SPECIFICATIONS 9.3 g (0.3 oz) Coplanarity MTBF 150 µm Telcordia SR-332 7,562,142 hours ENVIRONMENTAL SPECIFICATIONS Input voltage range 5 Vin 12 Vin Input current Min load Remote OFF Input current (max.) (See Note 8) 5 Vin 12 Vin 5.1 A max. @ Io max. 1.6 A @ lo max. Input reflected ripple (See Note 2) 5 Vin 12 Vin 52 mA (pk-pk) 56 mA (pk-pk) Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 3) Turn ON threshold 4.5-5.5 Vdc 10.2-3.8 Vdc 50 mA 5mA Positive logic >2.4 Vdc <0.8 Vdc Power-up Remote ON/OFF Thermal performance (See Note 9) Operating ambient, temperature Non-operating 0 ºC to +80 ºC -40 ºC to +125 ºC PROTECTION Short-circuit Hiccup, non-latching RECOMMENDED SYSTEM CAPACITANCE Input capacitance Output capacitance (See Note 10) 270 µF/20 mΩ ESR max. (See Note 10) 680 µF/10 mΩ ESR max. <20 ms <20 ms File Name: smt06c.pdf Rev (03): 15 Dec 2005 SMT06C Series 5 Vin and 12 Vin single output DC-DC CONVERTERS C Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm NEW Product OUTPUT POWER (MAX.) INPUT VOLTAGE OUTPUT VOLTAGE OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (11,12) 20 W 4.5-5.5 Vdc 0.9-3.3 Vdc 0A 6A 89% ±0.2% ±0.5% SMT06C-05SADJJ 30 W 10.2-13.8 Vdc 0.9-5.0 Vdc 0A 6A 91% ±0.2% ±0.5% SMT06C-12SADJJ Part Number System with Options REGULATION SMT06C-12SADJJ Product Family SMT = Surface Mount Packaging Options (11) J = Pb-free (RoHS 6/6 compliant) Rated Output Current 06 = 6 A Number of Outputs SADJ = Single Adjustable Output Performance C = Cost Optimized Input Voltage 05 = 4.5 Vdc to 5.5 Vdc 12 = 10.2 Vdc to 13.8 Vdc Output Voltage Adjustment of the SMT06C Series The ultra-wide output voltage trim range offers major advantages to users who select the SMT06C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT06C series converter leaves the factory the output has been adjusted to the default voltage of 0.9 V. Notes Ripple and Noise Specification 1 di/dt = 10 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo max. to 0.75 lo max. and 0.75 lo max. to 0.5 lo max. 2 Measured with external filter. See Application Note 169 for details. 3 Power up is the time from application of dc input to Power Good high. Remote ON/OFF asserted high to Power Good high. 4 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 5 Measured as per recommended set-up. Cin = 270 µF (20 mΩ ESR max.). Cout = 680 µF (10 mΩ ESR max.). 6 Uses external resistor from trim to ground. Minimum value 485 Ω for 5 V model, 280 Ω for 12 V model. See Application Note 169 for details. 7 Signal line assumed <3 m. 8 External input fusing recommended. 9 See Application Note 169 for operation above 50 ºC. 10 See Application Note 169 for more details. 11 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 12 NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. Model Output Voltage Pk - Pk RMS 5 V input models 0.9 Vdc to 2.5 Vdc 3.3 Vdc 30 mV 40 mV 15 mV 15 mV 12 V input models 0.9 Vdc to 2.5 Vdc 3.3 Vdc to 5 Vdc 40 mV 50 mV 20 mV 20 mV International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. 60950 UL 60950 File No. E139421 TÜV Product Service (EN60950:2000) Certificate No. B 04 08 19870 228 CB report and certificate to US/6415C/UL File Name: smt06c.pdf Rev (03): 15 Dec 2005 SMT06C Series 5 Vin and 12 Vin single output DC-DC CONVERTERS C Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm 0.190 (4.83) 1.200 (30.48) 0.190 (4.83) NEW Product 0.190 (4.83) 0.190 (4.83) 0.310 (7.87) PIN 5 0.430 (10.93) 0.530 (13.46) PIN 2 PIN 1 PIN 6 0.315 (8.00) 0.466 (11.83) Installed Ht. 0.050 (1.27) Seating Plane 0.062 (1.57) REF 6 x 0.089 (2.26) 0.019 (0.48) TYP All dimensions in inches (mm) All tolerance ±0.010in (±0.25mm) unless otherwise stated PIN CONNECTIONS PIN NUMBER FUNCTION 1 Remote ON/OFF 2 Power Good 3 Trim 4 Vout 5 GND 6 Vin Datasheet © Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Datasheet www.artesyn.com File Name: smt06c.pdf Rev (03): 15 Dec 2005