120-960 Watts ADN Series Total Power: 120 - 960 Watts Input Voltage: 1Ø or 3Ø 380-480 VAC # of Outputs: One 3-Phase Electrical Specs Input Nominal voltage Power factor (PFC) AC Input range DC Input range Frequency Phase 380-480 VAC EN61000-3-2 340-576 VAC 450-820 VDC 47 - 63 Hz, 500 Hz 1Ø or 3Ø on 5, 10 & 20A* models. 30A & 40A models are 3Ø only. Output Nominal voltage Holdup time Tolerance Special Features •Complies with EN61000-3-2 •DC OK Signal (indicator) •Adjustable Voltage •Industrial grade design (no derating to 60°C) •User-friendly front panel •Single phase input available •Highly efficient >90% switching technology •High MTBF and reliability •Peak current capability 2x rated current for 2 seconds •Three year warranty 24V (22.5 - 28.5 VDC Adj.) >20ms at full load (25°C) <±2% overall (combination line/load/time/temp) Line regulation <0.5% Load regulation <0.5% Time & temp. drift <1% Initial voltage setting 24.5V ±1% Ripple <50mVpp Parallel Operation Current limit (fold forward) constant power 10A, 20A, 30A User selectable 40A Active single wire parallel Over voltage protection >30.5 <33 VDC *On 20A unit, derate to 75% when operating 1Ø. Safety EMC Emissions Environmental Storage/shipment Operating (convection) Humidity -25°C to +85°C -10°C to 60°C (derate to 50% at +70°C) <90% RH noncondensing per IEC 68-2-2, 68-2-3 IP20 (EN60529), protection from moisture & condensation Note: Derate output to 50% when unit is mounted sideways or front side up. 190 Immunity Approvals Protection EN500081-1, -2 Class B EN55011, EN55022 Radiated and Conducted including Annex A. EN50082-1, -2; EN61000-4-2, Level 4, EN61000-4-3 Level 3, EN61000-4-6 Level 3; EN61000-4-4 Level 4 input and Level 3 output; EN61000-4-5 Isolation Class 4, EN61000-4-11; Transient resistance according to VDE 0160/W2 over entire load range. CB Scheme, EN60950; EN50178; EN60204; UL508 Listed, cULus; UL60950, cRUus, CE (LVD 73/23 & 93/68/EEC) EN61000-3-2, IEC 6007915 Class 1, Zone 2 hazardous location, Groups IIA, IIB, IIC w/T3 temp class up to 60°C Ambient. Class 1 (IEC536), degree of protection SELV rated per EN60950 Technical Support: (888) 41ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 rev 03.25.05 AMERICAS EUROPE ASIA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 ADN Series Ordering Information Model Weight Power Input Voltage Current ADN5-24-3PM ADN10-24-3PM ADN20-24-3PM ADN30-24-3PM ADN40-24-3PM 1.7lbs (730g) 2.16lbs (980g) 3.97lbs. (1800g) 4.0lbs (2000g) 6.6lbs (3300g) 120W 240W 480W 720W 960W 380-480VAC 380-480VAC 380-480VAC 380-480VAC 380-480VAC 5A 10A 20A 30A 40A Catalog Number ADN5-24-3PM Catalog Number ADN10-24-3PM ADN20-24-3PM ADN30-24-3PM ADN40-24-3PM Dimensions - inches (mm) H 4.88 (124) W 2.91 (73) D 4.55 (116) Dimensions - inches (mm) H 4.88 (124) 4.88 (124) 4.88 (124) 4.88 (124) W 3.50 (89) 5.90 (150) 9.72 (247) 11.10 (282) D 4.55 (116) 4.55 (116) 4.55 (116) 4.55 (116) Installation Fusing -Input -Output Mounting Connections Internally fused. Outputs are capable of providing high currents for short periods of time for inductive load startup or switching. Fusing may be required for wire/loads if 2x Nominal O/P current rating cannot be tolerated. Continuous current overload allows for reliable fuse tripping. Simple snap-on system for DIN Rail TS35/7.5 or TS35/15 or chassis-mounted (optional screw mounting set SDNPMBRK2 required). Input: IP20-rated screw terminals, connector size range: 16-10 AWG (1.5-6 mm2) for solid conductors. 16-12 AWG (0.5-4 mm2) for standard conductors. Output: Two connectors per output, connector size range: 16-10 AWG (1.5 - 6mm2) for solid conductors. Case -Free Space www.astecpower.com Fully enclosed metal housing with fine ventilation grid to keep out small parts. 25mm above and below 25 mm left and right 15 mm in front 70 mm above and below 25 mm left and right 15 mm in front 191