60-480 Watts ADN Series Total Power: Input Voltage: # of Outputs: 60 - 480 Watts 115/230 VAC One Electrical Specs Input Nominal voltage Power factor (PFC) AC Input range DC Input range Frequency 115/230 VAC auto select EN61000-3-2 85-123 / 176-264VAC 210-375VDC 47-63 Hz, 500 Hz Output Nominal voltage Holdup time Tolerance Special Features • • • • • • • • • • • • • • Power Factor Correction Auto Select 115/230 VAC, 50/60 Hz Input All Single Phase models meet SEMI F47 Sag Immunity Class 1, Div 2 Hazardous Locations DC OK Signal Adjusable Voltage Industrial grade design (no derating to 60°C) User-friendly front panel Single and three phase inputs available Highly efficent >90% switching technology High MTBF and reliability Peak current capability 2x rated current for 2 seconds Three year warranty NEC Class 2 on models <100W Tolerance Line regulation Load regulation Time & temp. drift Initial voltage setting Ripple Power back immunity Parallel Operation ADN20-24-1PM All others Switch selectable Jumper selectable via front panel Over voltage protection < 33VDC Safety EMC Emissions Immunity Environmental Storage/Shipment Operating (convection) Humidity -25°C to +85°C -10° C to +60° C (derate to 50% at +70° C) <90% RH noncondensing per IEC 68-2-2, 68-2-3 IP20 (EN60529), protection from moisture & condensation Approvals Protection 190 24V (22.5-28.5VDC Adj.) > 20ms at full load (25°C) < ±2 % overall (combination line/load/time/temp) < ±2 % overall <0.5% <0.5% <1% 24.5V ± 1% < 50mVpp > 35V EN 61000-6-3, Class B EN55011, EN55022 Radiated Conducted including Annex A EN 61000-6-2, EN61000-4-2 Level 4, EN61000-4-3 Level 3, EN61000-4-6 Level 3, EN61000-4-4 Level 4 input and level 3 output. EN61000-4-5 Isolation class 4, EN61000-4-11, Transient protection according to VDE 0160/W2 over entire load range. EN60950, UL508 Listed, cULus, UL 60950, cURus, CE (LVD 73/23 & 93/68/EEC), (EMC 89/336 & 93/68/EEC). EN61000-3-2, EN60079-15 (Class 1, Division 2 hazardous location, Groups A, B, C, D w/ T3 temp class up to 60°C Ambient.) SEMIF47 Sag Immunity. For models <100W, UL60950 testing to include approval as NEC Class 2 power supply acc. To NFPA 70 art. 725-41 (a)(2). Class 1 (IEC536), degree of protection SELV rated per EN60950 Technical Support: (888) 41ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 rev 09.08.05 AMERICAS EUROPE ASIA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Kwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Ordering Information Model Weight Power Voltage Current Case Type ADN2.5-24-1PM 1.6 lbs. (725g) 60W 85-264VAC 90-375VDC 2.5A metal ADN4-24-1PP 0.7 lbs. (320g) 93W 85-132 / 176-264VAC 210-375VDC 3.8A plastic ADN4-24-1PM 2.4 lbs. (1055g) 100W 85-132 / 176-264VAC 210-375VDC 4A metal ADN5-24-1PM 2.4 lbs. (1055g) 120W 85-132 / 176-264VAC 210-375VDC 5A metal ADN10-24-1PM 3.3 lbs. (1480g) 240W 85-132 / 176-264VAC 210-375VDC 10A metal ADN20-24-1PM 3.4 lbs. (1520g) 480W 85-132 / 176-264VAC 20A metal ADN2.5 thru ADN10 DIMENSIONS(inches) Height Width Depth ADN2.5-24-1PM 4.88 1.97 4.55 ADN4-24-1PP 2.95 2.85 3.80 ADN4-24-1PM 4.88 2.56 4.55 ADN5-24-1PM 4.88 2.56 4.55 ADN10-24-1PM 4.88 3.26 4.55 ADN20-24-1PM 4.88 6.88 4.66 ADN20 www.astecpower.com 191