W9959_03_LP_final_074-098_25 2/8/02 4:03 PM Page 88 40 Watts SA40-1313 Series Total Power: Input Voltage: # of Outputs: 40 Watts 85-264 VAC Triple Electrical Specs Input Input range Frequency Inrush current 85-264 VAC 47-63 Hz <25 A peak @ 115 VAC; <50 A peak @ 230 VAC, cold start at 25°C 1 A max. (RMS) @ 115 VAC; 0.5 A max (RMS) @ 230 VAC 70% typical at full load, nominal line >0.65 Meets FCC 20780 Class B and VDE 0871 Level B Input current Efficiency Power factor EMI filter Special Features • • • • • • • • Low cost Universal input 3” x 5” footprint Built-in EMI filter Low output ripple 100% computerized final testing Overvoltage protection Overload protection Output Maximum power Cross regulation Overshoot Hold-up time Overvoltage protection Safety ground Leakage current Overload protection 40 W convection ±2% on output 1; ±5% on outputs 2, 3 None 20 ms @ full load, 115 VAC nominal line +5 V trip voltage less than 6.8 V; recycle AC safety ground to reset < 0.5 mA @ 250 VAC, 50 Hz Short circuit protected on all outputs Environmental Operating temperature: 0° to 50°C ambient Safety Storage temperature: -40° to 85°C Thermal regulation: ±.04% per °C MTBF: >100,000 hours at full load and 25°C ambient conditions per MIL-HDBK-217E 88 America’s (USA): 1-888-41-ASTEC TUV UL CSA VDE EN CB IEC950 UL1950 CSA22.2-234 VDE0805, IEC 950 60950 certificate and report Europe (UK): 44 (1384) 842-211 R9153228 E132002 LR53982C 11774-3336-1164 UL330-132002 / USA Asia (HK): 852-2437-9662 W9959_03_LP_final_074-098_25 2/8/02 4:03 PM Page 89 AMERICAS EUROPE ASIA 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44(1384) 843-355 Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 SA40-1313 Series Ordering Information Model Number Output Voltage Minimum Load Maximum Load Peak Load1 Regulation2 Ripple P/P (PARD)3 SA40-1313 5V 12 V -12 V 0.45 A 0.3 A 0A 5A 3A 0.35 A — 4.5 A — +5%, -4% ±5% ±10% 50 mV 120 mV 120 mV 1. Peak current lasting <20 seconds. (Maximum Po = 60 W) 2. At 25°C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF capacitor in parallel with 0.1 µF capacitor at rated line voltage and load ranges. Pin Assignments Connector SA40-1313 SK1-1 SK1-2 SK1-3 Live Pin removed Neutral SK2-1 SK2-2 SK2-3 SK2-4 SK2-5 SK2-6 +12 V +5 V +5 V Common Common -12 V 0.14 (3.5) M1 3.0 (76.2) www.astec.com + 1 2 3 4 5 6 N L M4 Mating Connectors AC Input: Molex 09-91-0300 DC Outputs: Molex 09-91-0600 Notes: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm). 3. Mounting holes M1, M2 and M3 should be grounded for EMI purposes. 4. Mounting hole M1 is safety ground connection. 5. Specifications are for convection rating at factory settings at 115 VAC input, 25°C unless otherwise stated. 6. For safety purposes, on mounting hole M4 use plastic standoff. 7. Warranty: 1 year 8. Weight: 0.54 lb / 0.25 kg SK 2 SK 1 3 2.57 2 (65.2) 1 .022 (5.5) 1.34 (34.0) M2 0.156 (4) DIA (3 places) M3 4.57 (116.0) 0.22 (5.5) 5.0 (127.0) 0.12 (3) 89