Embedded Power for Business-Critical Continuity Rev. 01.08.09_151 AD8024N3L-001 of 2 AD8024N3L-001 78 Watts Total Power: Input Voltage: # of Outputs: 78 Watts 90 - 264 Vac Single Special Features •CE Mark EMC & LVD •Universal AC input •Fully regulated output •Overcurrent, Overvoltage and Thermal protection •Constant voltage •High efficiency •High MTBF •IEC320 AC receptacle, 3 pin (type C14) •Built in EMI filter •(CISPR 22 Class B) •AC Input fuse •Complies with CeC IV and Energy Star Requirement Electrical Specifications Input Input range: Frequency: Input current: Efficiency: EMI/RFI: Safety ground leakage current: 90-264 Vac (wide range) 47-63 Hz 2 A maximum 84% typical FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B 0.5 mA maximum@ 50/60 Hz, 264 Vac input Output Maximum Power (Po): Hold-up time: Overcurrent protection: Thermal protection: Cable/connector: 78 W 10 ms. minimum at full load @ 115 Vac Output short circuit protection auto recover Overload protection @ 110 - 120% above maximum rating Internally protected; output will latch off DC cable length 2.5 mm center plug DC plug center +v DC plug outer -v Environmental Specifications Safety • UL: UL 60950-1 • CSA: CSA-C22.2 no.60950-1 • NEMKO: EN/IEC60950-1 • CB: Certificate and report Operating temperature: 0° to +40 °C ambient Storage temperature: Electromagnetic susceptibility: -40 °C to +70 °C Designed to meet EN61000-4-2, -3, -4, level 2; EN61000-4-5, Level 4; EN61000-3-3 Humidity: Operating; non-condensing 5% to 90% RH MTBF demonstrated: > 300,000 hours at full load and 25 °C ambient conditions Embedded Power for Business-Critical Continuity Ordering Information Americas Model Number Maximum Output Maximum Ripple Peak Load1 Regulation2 Power Voltage Load P/P (PARD)3 AD8024N3L-001 80 W 24 Vdc 3.25 A 4.16 A ±5% < 400mV 1. Peak current lasting < 4 seconds with a maximum 10% duty cycle. 2. At 25 ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. Mechanical Drawing REFER TO O/P CABLE DRAWING Rev. 01.08.09_151 AD8024N3L-001 of 2 5810 Van Allen Way Carlsbad, CA 92008 USA Telephone:+1 (760) 930 4600 Facsimile: +1 (760) 930 0698 Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom Telephone:+44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 62” (1575) 1.76” 44.6 3.13” (79.6) 5.87” (149.0) 14/F, Lu Plaza 2 Wing Yip Street Kwun Tong, Kowloon Hong Kong Telephone:+852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.PowerConversion.com techsupport.embeddedpower@ emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. AC POWER ADAPTER MODEL LABEL 1.76” (H) x 3.13” (W) x 5.87” (L) 44.0 mm (H) x 79.6 mm (W) x 149.0 mm (L) AC Input Connector: IEC320, C14 AC Input power cord sold separately Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing Notes: Embedded Power 1.Specifications subject to change without notice. Monitoring 2.All dimensions in inches (mm), tolerance is ± 0.02” (±0.5 mm) 3.Warranty: 2 year 4.Weight: 0.91 lb./ 0.41 kg 5.AC input power cord sold separately. 6.Specifications at factory settings at 115 VAC input, 25 °C unless otherwise stated Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2008 Emerson Electric Co.