STN2907S Semiconductor PNP Silicon Transistor Descriptions • General purpose application • Switching application Features • Large collector current: IC=-600mA • Low collector saturation voltage: VCE(sat)=-0.4V(Max.) @ IC=-150mA, IB=-15mA • Complementary pair with STN2222S Ordering Information Type NO. STN2907S Marking Package Code GA SOT-23 Outline Dimensions unit : mm 1 3 2 PIN Connections 1. Base 2. Emitter 3. Collector KST-2056-003 1 STN2907S Absolute maximum ratings (Ta=25°C) Characteristic Symbol Rating Unit Collector-Base voltage VCBO -60 V Collector-Emitter voltage VCEO -40 V Emitter-Base voltage VEBO -5 V Collector current IC -600 mA Collector power dissipation PC* 350 mW Junction temperature TJ 150 °C Tstg -55~150 °C Storage temperature range * : Package mounted on 99.5% Alumina 10×8×0.6mm. Electrical Characteristics Characteristic (Ta=25°C) Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=-10µA, IE=0 -60 - - V Collector-Emitter breakdown voltage BVCEO IC=-1mA, IB=0 -40 - - V Emitter-Base breakdown voltage BVEBO IE=-10µA, IC=0 -5 - - V Collector cut-off current ICBO VCB=-60V, IE=0 - - -10 nA DC current gain hFE VCE=-10V, IC=-10mA 75 - - - - - -0.4 V 250 - - MHz - 6.0 - pF Collector-Emitter saturation voltage Transition frequency Collector output capacitance VCE(sat) fT Cob IC=-150mA, IB=-15mA VCE=-20V, IC=-20mA VCB=-10V, IE=0, f=1MHz KST-2056-003 2 STN2907S Electrical Characteristic Curves Fig. 2 IC - VBE Fig. 1 PC - Ta Fig. 3 I C - VCE Fig. 4 VCE(sat) - IC ㎂ Fig. 5 hFE - IC Fig. 6 hFE - KST-2056-003 IC 3 STN2907S These AUK Corp. products are intended for usage in general electronic equipment (Office and communication equipment, measuring equipment, domestic electrification, etc.) Please make sure that you consult with us before you use these AUK products in equipm ents which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.) AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KST-2056-003 4