STN2907 Semiconductor PNP Silicon Transistor Descriptions • General purpose application • Switching application Features • Large collector current • Low collector saturation voltage • Complementary pair with STN2222 Ordering Information Type NO. Marking Package Code STN2907 STN2907 TO-92 Outline Dimensions unit : mm 3.35~3.55 4.4~4.6 4.4~4.6 2.15~2.35 1.96~2.16 14.0±0.40 0.38~0.42 1.27 Typ. 2.54 Typ. 2 3 PIN Connections 1. Emitter 2. Base 3. Collector 0.38 1.1~1.3 1 KST-9063-003 1 STN2907 Absolute maximum ratings Ta=25°C Characteristic Symbol Ratings Unit Collector-Base voltage VCBO -60 V Collector-Emitter voltage VCEO -40 V Emitter-Base voltage VEBO -5 V Collector current IC -600 mA Collector dissipation PC 625 mW Junction temperature Tj 150 °C Storage temperature Tstg -55~150 °C Electrical Characteristics Characteristic Ta=25°C Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=-10µA, IE=0 -60 - - V Collector-Emitter breakdown voltage BVCEO IC=-1mA, IB=0 -40 - - V Emitter-Base breakdown voltage BVEBO IE=-10µA, IC=0 -5 - - V Collector cut-off current ICBO VCB=-50V, IE=0 - - -10 nA DC current gain hFE VCE=-10V, IC=-10mA 75 - - - - - -0.4 V 250 - - MHz - 6.0 - pF Collector-Emitter saturation voltage Transistor frequency Collector output capacitance VCE(sat) fT Cob IC=-150mA, IB=-15mA VCE=-20V, IC=-50mA VCB=-10V, IE=0, f=1MHz KST-9063-003 2 STN2907 Electrical Characteristic Curves Fig. 1 PC-Ta Fig. 2 IC-VBE Fig. 3 IC-VCE Fig. 4 VCE(sat)-IC Fig. 6 hFE-IC Fig. 5 hFE-IC -55°C KST-9063-003 3 STN2907 These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipments which require high quality and/or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK. KST-9063-003 4