HDSP-S8xE/S8xG Series 17.5 mm (0.69 inch) General Purpose 8 x 8 Dot Matrix Alphanumeric Displays Data Sheet Description These displays have a 17.5 mm (0.69 inch) character height. The devices are available in common anode and common cathode. The displays come in only black face paint and are available in a choice of GaP Red (HER) or GaP Green colors. These parts are subjected to Outgoing Quality Assurance (OQA) inspection with an AQL of 0.065% for functional and visual/cosmetic defects. Applications • Suitable for indoor use • Not recommended for industrial applications, i.e., operating temperature requirements exceeding 85°C or below –35°C • Extreme temperature cycling not recommended[1] Features • 8 x 8 Dot matrix font • X-Y stackable • Choice of colors – Single color: red or green • Face paint color: black • Design flexibility – Common row anode – Common row cathode • Categorized for luminous intensity • Green categorized for color Devices Gap Red HDSPS80E S85E GaP Green HDSPS80G S85G Description 17.5 mm Black Surface Common Row Anode 17.5 mm Black Surface Common Row Cathode Note: 1. For details, please contact your local Avago components sales office or an authorized distributor. Package Dimensions 20.20 (0.795) 2.5 x 7 = 17.5 (0.689) COL 1 2 3 4 5 1 ∅1.90 (0.0750) 2 3 4 20.20 2.5 x 7 = 17.5 (0.689) (0.795) 5 6 7 PIN 1 8 ROW PART NO. 6.0 (0.24) 3.76 (0.148) ± 0.5 0.51 (0.020) 2.54 x 7 = 17.78 (0.70) NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm. 2 15.24 (0.600) 6 7 8 Internal Circuit Diagram Common Row Anode HDSP-S80E/S80G COLUMN PIN 9 2 14 3 8 4 12 3 2 3 4 5 6 7 8 3 4 10 6 11 15 16 PIN ROW 1 1 13 5 1 6 7 7 2 8 5 CONNECTION 1 ROW 5 2 3 ROW 7 COLUMN 2 4 5 COLUMN 3 ROW 8 6 COLUMN 5 7 8 ROW 6 ROW 3 9 10 11 12 13 ROW 1 COLUMN 4 COLUMN 6 ROW 4 COLUMN 1 14 ROW 2 15 16 COLUMN 7 COLUMN 8 Internal Circuit Diagram Common Row Cathode HDSP-S85E/S85G COLUMN PIN ROW 1 9 2 14 3 8 4 12 4 5 1 6 7 7 2 8 5 1 2 3 4 5 6 7 8 13 3 4 10 6 11 15 16 PIN CONNECTION 1 2 3 4 ROW 5 ROW 7 COLUMN 2 COLUMN 3 5 6 7 8 9 ROW 8 COLUMN 5 ROW 6 ROW 3 ROW 1 10 11 12 13 14 COLUMN 4 COLUMN 6 ROW 4 COLUMN 1 ROW 2 15 COLUMN 7 16 COLUMN 8 Absolute Maximum Ratings at TA = 25˚C Parameter Average Power per Dot[1] Peak Forward Current per Dot[1] (1/8 Duty Cycle at 10 KHz) Average Forward Current per Dot Reverse Voltage per Dot Operating Temperature Storage Temperature Wave Soldering Temperature for 3 seconds[4] (2 mm [0.078 in.] below Body) GaP Red HDSP-S80E/S85E 65 GaP Green HDSP-S80G/S85G 65 Units mW 80 25[1,2] 3 –35 to +85 –35 to +85 100 25[1,3] 3 –35 to +85 –35 to +85 mA mA V °C °C 250 250 °C Notes: 1. Do not exceed maximum average current per dot. 2. Derate above 25°C at 0.20 mA/°C. 3. Derate above 25°C at 0.33 mA/°C. 4. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 3 seconds. Optical/Electrical Characteristics at TA = 25˚C GaP Red Devices HDSPParameter Luminous Intensity/Dot (Digit Average)[1] Peak Wavelength S80E/ Dominant Wavelength[2] S85E Forward Voltage Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol Iv λpeak λd VF VR I v-m Min. 0.82 Typ. 1.2 632 622 2.1 Max. 2.4 3.0 Units mcd nm nm V V 2:1 Test Conditions IFP = 40 mA, 1/8 Duty Factor IF = 20 mA IF = 20 mA IF = 20 mA IR = 100 µA IFP = 40 mA, 1/8 Duty Factor GaP Green Devices HDSPParameter Luminous Intensity/Dot (Digit Average)[1] Peak Wavelength Dominant Wavelength[2] S80G\ S85G Forward Voltage Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol Iv λpeak λd VF VR I v-m Min. 1.0 Typ. 1.5 568 573 2.3 Max. 2.6 3.0 2:1 Units mcd nm nm V V Test Conditions IFP = 40 mA, 1/8 Duty Factor IF = 20 mA IF = 20 mA IF = 20 mA IR = 100 µA IFP = 40 mA, 1/8 Duty Factor Notes: 1. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Typical specification for reference only. Do not exceed absolute maximum ratings. 5 Intensity Bin Limits[1] (mcd at IFP = 40 mA, 1/8 Duty Factor) GaP Red Bin Name E F Min.[2] 0.97 1.46 Max.[2] 1.45 2.19 Min.[2] 0.97 1.46 2.20 Max.[2] 1.45 2.19 3.30 GaP Green Bin Name E F G Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each intensity bin limit is ± 10%. Color Bin Limits (nm)[1] Green Bin Name 3 4 5 Min.[2] 569.1 571.1 573.1 Max.[2] 571 573 575 Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each color bin limit is ± 1.0 nm. 6 20 GaP RED 15 GaP GREEN 10 5 0 0 20 40 60 80 100 TA – AMBIENT TEMPERATURE – °C Figure 1. Maximum allowable average current per dot vs. ambient temperature. 1.2 45 ηPEAK – RELATIVE EFFICIENCY 25 IF – FORWARD CURRENT PER DOT – mA IF AVG. – MAXIMUM AVERAGE CURRENT – mA 30 40 GaP RED 35 30 GaP GREEN 25 20 15 10 5 0 0 0.5 1.0 1.5 2.0 2.5 3.0 VF – FORWARD VOLTAGE – V Figure 2. Forward current vs. forward voltage. 1.0 GaP RED / GaP GREEN 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 55 60 IPEAK – PEAK DOT CURRENT – mA Figure 3. Relative luminous intensity vs. dc forward current. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. Device Reliability For reliability information, please see the reliability data sheet 17.5 mm General Purpose 8 x 8 Dot Matrix Alphanumeric Displays. 7 For product information and a complete list of distributors, please go to our website: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. 5988-1743EN May 18, 2006