Preliminary Datasheet MULTIPLE RS-232 DRIVERS AND RECEIVERS AZ75232 General Description Features The AZ75232 combines three drivers and five receivers, which conform to the EIA/TIA-232-F and ITU v.28 standards. Each receiver converts EIA/TIA-232-F inputs to 5-V TTL/CMOS levels and each driver converts TTL/CMOS input levels into EIA/TIA-232-F levels. · · · · · The flow-through pinout facilitates simple non-crossover board layout. The AZ75232 provides a one-chip solution for the common 9-pin serial RS-232 interface between data terminal and data communications equipment. Applications · · The AZ75232 is available in SOIC-20, SSOP-20 and TSSOP-20 packages. SOIC-20 Single Chip with Easy Interface between UART and Serial-Port Connector Meet the Requirement of EIA/TIA-232-F and ITU v.28 Standards Designed to Support Data Rates up to 120kbit/s 3 Drivers and 5 Receivers Flow-Through Pinout Mother Board Peripheral Equipment SSOP-20 TSSOP-20 Figure 1. Package Types of AZ75232 Aug. 2006 Rev. 1. 4 BCD Semiconductor Manufacturing Limited 1 Preliminary Datasheet MULTIPLE RS-232 DRIVERS AND RECEIVERS AZ75232 Pin Configuration M/GS/G Package (SOIC-20/SSOP-20/TSSOP-20) VDD 1 20 VCC RA1 2 19 RY1 RA2 3 18 RY2 RA3 4 17 RY3 DY1 5 16 DA1 DY2 6 15 DA2 RA4 7 14 RY4 DY3 8 13 DA3 RA5 9 12 RY5 VSS 10 11 GND Figure 2. Pin Configuration of AZ75232 (Top View) Pin Description Pin Number Pin Name 1 VDD 2 Pin Number Pin Name Positive Supply Voltage for Driver 11 GND Ground RA1 Receiver Input 12 RY5 Receiver Output 3 RA2 Receiver Input 13 DA3 Driver Input 4 RA3 Receiver Input 14 RY4 Receiver Output 5 DY1 Driver Output 15 DA2 Driver Input 6 DY2 Driver Output 16 DA1 Driver Input 7 RA4 Receiver Input 17 RY3 Receiver Output 8 DY3 Driver Output 18 RY2 Receiver Output 9 RA5 Receiver Input 19 RY1 Receiver Output 10 VSS Negative Supply Voltage for Driver 20 VCC Supply Voltage for Receiver Function Aug. 2006 Rev. 1. 4 Function BCD Semiconductor Manufacturing Limited 2 Preliminary Datasheet MULTIPLE RS-232 DRIVERS AND RECEIVERS AZ75232 Functional Block Diagram VDD 1 20 VCC 2 19 RY1 RA1 3 18 RA2 RY2 4 17 RA3 RY3 5 16 DY1 DA1 6 15 DY2 DA2 14 7 RY4 RA4 8 13 9 12 DY3 DA3 RA5 VSS RY5 10 11 GND Figure 3. Functional Block Diagram of AZ75232 Ordering Information AZ75232 E1: Lead Free Blank: Tin Lead TR: Tape and Reel Blank: Tube Circuit Type Package M: SOIC-20 GS: SSOP-20 G: TSSOP-20 Package Temperature Range SOIC-20 -40 to 85oC SSOP-20 -40 to 85oC TSSOP-20 -40 to 85oC Part Number Tin Lead Marking ID Lead Free Tin Lead Lead Free Packing Type AZ75232M AZ75232M-E1 AZ75232M AZ75232M-E1 Tube AZ75232MTR AZ75232MTR-E1 AZ75232M AZ75232M-E1 Tape & Reel AZ75232GS-E1 AZ75232GS-E1 Tube AZ75232GSTR-E1 AZ75232GS-E1 Tape & Reel AZ75232G-E1 232GE Tube AZ75232GTR-E1 232GE Tape & Reel BCD Semiconductor's Pb-free products, as designated with "E1" suffix in the part number, are RoHS compliant. Aug. 2006 Rev. 1. 4 BCD Semiconductor Manufacturing Limited 3 Preliminary Datasheet MULTIPLE RS-232 DRIVERS AND RECEIVERS AZ75232 Absolute Maximum Ratings (Note 1) Parameter Supply Voltage Input Voltage Range Power Dissipation (TA=25oC) Symbol Value VDD 15 VSS -15 VCC 7 VI PD Unit V Driver -15 to 7 Receiver -30 to 30 SOIC-20 1340 SSOP-20 1210 TSSOP-20 1100 V mW Driver Output Voltage Range VO -15 to 15 V Receiver Low-Level Output Current IOL 20 mA Operating Junction Temperature TJ 150 oC TSTG -65 to 150 oC TLEAD 260 oC Storage Temperature Range Lead Temperature (Soldering, 10sec) Note 1: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "Recommended Operating Conditions" is not implied. Exposure to "Absolute Maximum Ratings" for extended periods may affect device reliability. Recommended Operating Conditions Parameter Symbol Min Max VDD 7.5 15 VSS -15 -7.5 VCC 4.5 5.5 High-Level Input Voltage (Driver Only) VIH 1.9 Low-Level Input Voltage (Driver Only) VIL Supply Voltage High-Level Output Current Low-Level Output Current Driver Receiver Driver -6 -0.5 6 IOL Receiver TA Operating Temperature Range Aug. 2006 Rev. 1. 4 16 -40 V V 0.8 IOH Unit 85 V mA mA oC BCD Semiconductor Manufacturing Limited 4 Preliminary Datasheet MULTIPLE RS-232 DRIVERS AND RECEIVERS AZ75232 Electrical Characteristics (TA=25oC, unless otherwise specified.) Parameter Symbol Conditions Min Typ Max Unit VOLTAGE SUPPLY SECTION (VCC=5V, VDD=9V, VSS=-9V, unless otherwise specified) All inputs at 1.9V, no load Supply Current from VDD IDD All inputs at 0.8V, no load All inputs at 1.9V, no load Supply Current from VSS ISS All inputs at 0.8V, no load Supply Current from VCC ICC VDD=9V, VSS=-9V 15 VDD=12V, VSS=-12V 19 VDD=15V, VSS=-15V 25 VDD=9V, VSS=-9V 4.5 VDD=12V, VSS=-12V 5.5 VDD=15V, VSS=-15V 9 VDD=9V, VSS=-9V -15 VDD=12V, VSS=-12V -19 VDD=15V, VSS=-15V -25 VDD=9V, VSS=-9V -3.2 VDD=12V, VSS=-12V -3.2 VDD=15V, VSS=-15V -3.2 All inputs at 5V, no load, VCC=5V 30 mA mA mA DRIVER SECTION (VCC=5V, VDD=9V, VSS=-9V, unless otherwise specified) High-Level Output Voltage VOH VIL=0.8V, RL=3kΩ VIH=1.9V, RL=3kΩ 6 7.5 V Low-Level Output Voltage VOL -6 V High-Level Input Current IIH VI=5V 10 µA Low-Level Input Current IIL VI=0V -1.6 mA High-Level Short-Circuit Output Current IOS(H) Low-Level Short-Circuit Output Current IOS(L) Output Resistance rO -7.5 VIL=0.8V, VO=0V -4.5 -12 -19.5 mA VIH=2V, VO=0V 4.5 12 19.5 mA VCC=VDD=VSS=0, VO=-2Vto 2V 300 Ω DRIVER SECTION (VCC=5V, VDD=12V, VSS=-12V, unless otherwise specified) Propagation Delay Time Low to High Level Output tPLH RL=3kΩ to 7kΩ, CL=15pF 315 500 ns Propagation Delay Time High to Low Level Output tPHL RL=3kΩ to 7kΩ, CL=15pF 75 175 ns Transition Time Low to High Level Output tTLH RL=3kΩ to 7kΩ CL=15pF 60 100 ns CL=2500pF (Note 2) 1.7 2.5 µs Transition Time High to Low Level Output tTHL RL=3kΩ to 7kΩ CL=15pF 40 75 ns CL=2500pF (Note 2) 1.5 2.5 µs Aug. 2006 Rev. 1. 4 BCD Semiconductor Manufacturing Limited 5 Preliminary Datasheet MULTIPLE RS-232 DRIVERS AND RECEIVERS AZ75232 Electrical Characteristics (Continued) (TA=25oC, unless otherwise specified.) Parameter Symbol Conditions Min Typ Max Unit 1.75 1.9 2.3 V 2.3 V 1.25 V RECEIVER SECTION (VCC=5V, VDD=9V, VSS=-9V, unless otherwise specified) Positive-Going Input Threshold Voltage VIT+ Negative-Going Input Threshold Voltage VIT- 0.75 Input Hysteresis Voltage VHYS 0.5 High-Level Output Voltage VOH IOH=-0.5mA Low-Level Output Voltage VOL IOL=10mA, VI=3V High-Level Input Current IIH Low-Level Input Current Short-Circuit Output Current IIL IOS TA = -40 to 85 oC 1.55 VIH=0.75V 2.6 Input Open 2.6 VI=25V 3.6 VI=3V 0.43 VI=-25V -3.6 VI=-3V -0.43 0.97 V 4 5 0.2 0.45 V V 8.3 mA -8.3 mA VI=0.8V -3.4 -12 RL=5kΩ, CL=50pF 105 250 RL=1.5kΩ, CL=15pF 100 160 RL=5kΩ, CL=50pF 60 150 RL=1.5kΩ, CL=15pF 42 100 RL=5kΩ, CL=50pF 170 350 RL=1.5kΩ, CL=15pF 90 175 RL=5kΩ, CL=50pF 16 60 RL=1.5kΩ, CL=15pF 15 50 mA RECEIVER SECTION (VCC=5V, VDD=12V, VSS=-12V, unless otherwise specified) Propagation Delay Time Low to High Level Output tPLH Propagation Delay Time High to Low Level Output tPHL Transition Time Low to High Level Output tTLH Transition Time High to Low Level Output tTHL ns ns ns ns Note 2: Measured between -3V and 3V points of the output waveform (EIA/TIA-232-F conditions); all unused inputs are tied either high or low. Aug. 2006 Rev. 1. 4 BCD Semiconductor Manufacturing Limited 6 Preliminary Datasheet MULTIPLE RS-232 DRIVERS AND RECEIVERS AZ75232 Typical Performance Characteristics Driver Section 20 12 16 9 VDD=12V, VSS=-12V Output Current (mA) VDD=9V, VSS=-9V 6 Output Voltage (V) 12 VDD=6V, VSS=-6V 3 0 -3 RL=3K -6 VDD=9V VSS=-9V VOL(VI=1.9V) o TA=25 C 8 4 0 -4 -8 o TA=25 C -9 -12 VOH(VI=0.8V) -16 -12 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 -20 -16 2.0 Input Voltage (V) -12 -8 -4 0 4 8 12 16 Output Voltage (V) Figure 4. Voltage Transfer Characteristics Figure 5. Output Current vs. Output Voltage 1000 18 VDD = 9V VSS = -9V RL = 3K 12 IOS(L)(VI=1.9V) 9 Slew Rate (V/µs) Short-Circuit Output Current (mA) 15 6 3 0 VDD=9V VSS=-9V VO=0 -3 -6 100 10 IOS(H)(VI=0.8V) Slew Rate of Fall Edge Slew Rate of Rise Edge -9 -12 -40 -20 0 20 o TA = 25 C 40 60 1 10 80 100 1000 10000 Load Capacitance (pF) o Temperature ( C) Figure 7. Slew Rate vs. Load Capacitance Figure 6. Short-Circuit Output Current vs. Temperature Aug. 2006 Rev. 1. 4 BCD Semiconductor Manufacturing Limited 7 Preliminary Datasheet MULTIPLE RS-232 DRIVERS AND RECEIVERS AZ75232 Typical Performance Characteristics (Continued) Receiver Section 2.4 2.0 2.2 1.8 Input Threshold Voltage (V) Input Threshold Voltage (V) VIT+ 2.0 1.8 1.6 1.4 1.2 VIT- 1.0 0.8 1.4 1.2 1.0 0.8 VIT- 0.6 0.4 0.2 0.6 0.4 -40 VIT+ 1.6 0.0 -20 0 20 40 60 2 80 o 3 4 5 6 7 8 Supply Voltage (V) Temperature ( C) Figure 8. Input Threshold Voltage vs. Temperature Figure 9. Input Threshold Voltage vs. Supply Voltage 6 VCC = 5V o Amplitude (V) 5 TA = 25 C 4 3 2 1 CL=12pF CL=500pF 0 10 100 1000 10000 Pulse Duration (ns) Figure 10. Noise Rejection Aug. 2006 Rev. 1. 4 BCD Semiconductor Manufacturing Limited 8 Preliminary Datasheet MULTIPLE RS-232 DRIVERS AND RECEIVERS AZ75232 Typical Application EIA/TIA-232-F DB9S CONNECTOR TTL/CMOS Level 11 12 RI 13 DTR 14 CTS UART or Serial µC 15 TX 16 RTS 17 RX 18 DSR 19 DCD 5V 20 10 VSS GND RY5 RA5 DA3 DY3 RY4 RA4 DA2 AZ75232 DY2 DA1 DY1 RY3 RA3 RY2 RA2 RY1 RA1 VDD VCC Signal Ground -12V 9 RI 8 DTR C3 7 6 5 9 CTS TX C2 RTS C1 4 RX 3 DSR 2 DCD 1 5 6 1 12V Figure 11. Typical Application of AZ75232 Aug. 2006 Rev. 1. 4 BCD Semiconductor Manufacturing Limited 9 Preliminary Datasheet MULTIPLE RS-232 DRIVERS AND RECEIVERS AZ75232 Mechanical Dimensions SOIC-20 Unit: mm(inch) 0.400(0.016) 1.270(0.050) 10.000(0.394) 7.600(0.299) 7.400(0.291) 10.650(0.419) 0.204(0.008) 0.360(0.014) 12.600(0.496) 13.000(0.512) 0° 8° 1.270(0.050) TYP 2.180(0.086) 2.330(0.092) 0.100(0.004) 0.300(0.012) 0.350(0.014) 0.510(0.020) 2.280(0.090) 2.630(0.104) Aug. 2006 Rev. 1. 4 BCD Semiconductor Manufacturing Limited 10 Preliminary Datasheet MULTIPLE RS-232 DRIVERS AND RECEIVERS AZ75232 Mechanical Dimensions (Continued) SSOP-20 Unit: mm(inch) 0.650(0.026) 0.070(0.003) 0.230(0.009) 10 ° 14° 0.300(0.012) 1.690(0.067) MAX R0.150(0.006) 0.324(0.013) R0.150(0.006) 1.400(0.055) 1.600(0.063) 0.250(0.010) 1° 7° 0.630(0.025) 0.950(0.037) 1.250(0.049) DETAIL A 7.700(0.303) 7.900(0.311) 1.200(0.047) 1.200(0.047) 0.020(0.001) DEP 0.080(0.003) 5.200(0.205) 5.380(0.212) SEE DETAIL A 1.200(0.047) 1° 7° 7.070(0.278) 7.330(0.289) Aug. 2006 Rev. 1. 4 0.152(0.006) BCD Semiconductor Manufacturing Limited 11 Preliminary Datasheet MULTIPLE RS-232 DRIVERS AND RECEIVERS AZ75232 Mechanical Dimensions TSSOP-20 Unit: mm(inch) 6.400(0.252) 6.600(0.260) 1.450(0.057) 0.000(0.000) Dp 1.550(0.061) 0.100(0.004) BTM E-MARK 4.300(0.169) 4.500(0.177) 6.200(0.244) 6.600(0.260) 0.750(0.030) Dp 0.000(0.000) 0.100(0.004) 0.850(0.033) #1 PIN INDEX 0.650(0.026)TYP 0.900(0.035) 1.050(0.041) 0.340(0.013) 0.540(0.021) 1.200(0.047) MAX 0.100(0.004) 0.190(0.007) 0.050(0.002) 0.150(0.006) 4- 10° 14° TOP & BOTTOM 0.200(0.008)MIN 0.200(0.008) 0.280(0.011) R0.090(0.004)MIN R0.090(0.004)MIN 0.250(0.010)TYP 0° 8° 0.450(0.018) 0.750(0.030) Aug. 2006 Rev. 1. 4 1.000(0.039) REF BCD Semiconductor Manufacturing Limited 12 http://www.bcdsemi.com IMPORTANT NOTICE BCD Semiconductor Manufacturing Limited reserves the right to make changes without further notice to any products or specifications herein. BCD Semiconductor Manufacturing Limited does not assume any responsibility for use of any its products for any particular purpose, nor does BCD Semiconductor Manufacturing Limited assume any liability arising out of the application or use of any its products or circuits. BCD Semiconductor Manufacturing Limited does not convey any license under its patent rights or other rights nor the rights of others. MAIN SITE BCD Semiconductor Manufacturing Limited BCD Semiconductor Manufacturing Limited - Wafer Fab Shanghai SIM-BCD Semiconductor Manufacturing Limited 800, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6485 1491, Fax: +86-21-5450 0008 - IC Design Group Advanced Analog Circuits (Shanghai) Corporation 8F, Zone B, 900, Yi Shan Road, Shanghai 200233, China Tel: +86-21-6495 9539, Fax: +86-21-6485 9673 REGIONAL SALES OFFICE Shenzhen Office Shanghai SIM-BCD Semiconductor Manufacturing Co., Ltd. Shenzhen Office Advanced Analog Circuits (Shanghai) Corporation Shenzhen Office 27B, Tower C, 2070, Middle Shen Nan Road, Shenzhen 518031, China Tel: +86-755-8368 3987, Fax: +86-755-8368 3166 Taiwan Office BCD Semiconductor (Taiwan) Company Limited 4F, 298-1, Rui Guang Road, Nei-Hu District, Taipei, Taiwan Tel: +886-2-2656 2808, Fax: +886-2-2656 2806 USA Office BCD Semiconductor Corporation 3170 De La Cruz Blvd., Suite 105, Santa Clara, CA 95054-2411, U.S.A Tel: +1-408-988 6388, Fax: +1-408-988 6386