ADSL Magnetics Alcatel TM01379 • Operating and storage temperature range: -40° to +85° C • • Meets IEC 695, 2-2 flammability requirements • Minimum interwinding breakdown voltage of 600 Vrms • PWB Process Capability: standard printed wiring board assembly techniques, total-immersion cleaning Reliability testing: shock, vibration, temperature cycling, temperature - humidity - bias ELECTRICAL SPECIFICATIONS AT 25° C DCR Ω max Turns Ratio 2% Inductance1 mH ±10% Inductance1, 2 mH ±10% (1 - 6) : (3 - 4) (1 - 6) (1 - 4) (1 - 6) (3 - 4) 1:1 0.5 2 1.38 1.38 Part Number S560-6100-41 1. Inductance measured at 10 kHz, 0.1 Vac 2. Connect pins 6 and 3 SCHEMATIC S560-6100-41 1 3 6 4 ©2001 Bel Fuse Inc. Specifications subject to change without notice. 10.01 Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com page 1 ADSL Magnetics Alcatel TM01379 MECHANICAL 1 2 3 S560-6100-41 0.052 [1.32] typ 0.370 [9.40] max 6 5 4 0.420 [10.67] max 0.098 [2.50] typ 0.545 [13.84] 0.090 [2.29] typ 3 4 2 5 1 6 Suggested PCB Pad Layout 0.360 [9.14] max 0.004 [0.10] 6 edges 0.098 [2.50] 0.417 [10.59] 0.026 [0.66] typ Phosphor bronze, solder coated 0.520 [13.21] max Dimensions are in inches [millimeters]. Standard dimension tolerance is ±0.005 [0.13] unless otherwise noted. Tape and Reel Packaging 24 mm wide by 16 mm pitch; 13 inch OD, 4 inch ID 400 components per reel, maximum Meets ANSI/EIA 481-2 Carrier Tape Standards User Feed Direction Orientation of Component Inside Pocket ©2001 Bel Fuse Inc. Specifications subject to change without notice. 10.01 CORPORATE FAR EAST EUROPE Bel Fuse Inc. 206 Van Vorst Street Jersey City, NJ 07302 Tel 201-432-0463 Fax 201-432-9542 www.belfuse.com Bel Fuse Ltd. 8F / 8 Luk Hop Street San Po Kong Kowloon, Hong Kong Tel 852-2328-5515 Fax 852-2352-3706 www.belfuse.com Bel Fuse Europe Ltd. Preston Technology Management Centre Marsh Lane, Suite G7, Preston Lancashire, PR1 8UD, U.K. Tel 44-1772-556601 Fax 44-1772-888366 www.belfuse.com page 2